Dupline Display for Carpark Type GP 6763 0109 / 110 / 111 / 116 Brightly lit green and red LEDs Display built into robust aluminium box RS485 communication Internal dipswitch for selection of digit type cULus approved Product Description Ordering key GP 6763 01XXX The GP6763 01xx display is GP6763 01xx signals the Type: Dupline part of a car park system direction and/or number of Carpark which, among other things, free parking bays. Display contains a GP3482 9091 Because of the method of Type monitor and several sensor communication, it is possible types with type numbers to interconnect several dis- GP6220 220x and GP6240 plays on the same network. 2224. The display is available in By means of LEDs, the indoor and outdoor versions. General Specifications General Specifications (cont.) Technology LED SMD Dimensions (h x w x d) GP6763 0116(A) Matrix resolution Indoor version 145 x 430 x 60 mm GP67630109 16 x 48 pixel Outdoor version (A) 185 x 490 x 92 mm GP67630116 16 x 64 pixel GP6763 0109 / 110 / 111(A) GP67630110 / 111 16 x 32 pixel Indoor version 145 x 335 x 60 mm LED colour Red and green (two colour Outdoor version (A) 185 x 395 x 92 mm combination: Amber) Weight Viewing distance Up to 50 m. GP6763 0109(A) Symbols configuration Indoor version 1575 g Digits / characters Depends of the selected Outdoor version (A) 2000 g displays GP6763 0110 / 111(A) Cross & Arrow symbols Yes (configurable and Indoor version 1500 g animated) Outdoor version (A) 1800 g Disabled symbol GP6763 0116(A) GP6763 0109 / 116 No Indoor version 2100 g GP6763 0110 / 111 Yes Outdoor version (A) 2400 g Brightness control Automatic (light sensor) Approval cULus (UL60950) Interface RS485 Baudrate 4800 Protocol Carpark Type Selection Casing Aluminium Environment GP6763 0109 1 Arrow + 2 Digits Operating temperature -15 to 50C GP6763 0109A 1 Arrow + 2 Digits outdoor Degree of protection IP30 (indoor) GP6763 0110 1 Arrow + 1 Digit + HCP (Right) IP55 (outdoor) GP6763 0110A 1 Arrow + 1 Digit + HCP (Right) outdoor Humidity (non condensing) 0 - 90% relative humidity GP6763 0111 1 Arrow + 1 Digit + HCP (Left) Power supply 18-24 VDC GP6763 0111A 1 Arrow + 1 Digit + HCP (Left) outdoor Consumption (maximum/typical) GP6763 0116 1 Arrow + 3 Digits GP6763 0109 / 110 / 111 60 W / 40W GP6763 0116A 1 Arrow + 3 Digits outdoor GP6763 0116 100 W / 60W Specifications are subject to change without notice (23.06.2015) 1 GP 6763 0109/110/111/116 Display types GP6763 0109 GP6763 0110 GP6763 0111 GP6763 0116 Mode of Operation The dip switch can be accessed by removing the cap placed Bit 7 Number of symbols Bit 8 Symbol Alignment on the back cover of the panel. This cover is attached by 2 screws. It is only necessary to remove the screw from the Symbol with right 0 1 symbol 0 bottom to access the dip switch located on the main control- alignment ler. Symbol with left 1 2 symbols 1 The dip switch configuration (DS2) has the following settings: alignment Bit 3 Bit 2 Bit 1 Vacant Mode Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 0 0 0 Totalize 0 0 0 0 0 Reserved Must be 0 0 0 1 Arrow rotating from bottom to top During the panel configuration, the following operation notes 0 1 0 Arrow rotating from left to right should be considered: 0 1 1 Arrow rotating from right to left 1 0 0 Arrow rotating from top to bottom Configuration Operation Mode 1 0 1 Steady Cross Totalize Mode In totalize mode, only numbers are dis- played. If the number of digits exceeds 1 1 0 Reserved Must be 0 the number of panel boards, nothing is 1 1 1 Nothing displayed displayed. The numbers are always displayed with Bit 6 Bit 5 Bit 4 Occupied Mode right alignment. Symbol Modes The symbols always takes priority over 0 0 0 Totalize thenumbers. If the number doesnt fit in 0 0 1 Arrow rotating from bottom to top the panel, only the symbol is displayed 0 1 0 Arrow rotating from left to right with the selected alignment. In the occupied mode operation, the 0 1 1 Arrow rotating from right to left red Arrow-Cross symbol is displayed 1 0 0 Arrow rotating from top to bottom instead of the number, so it can be com bined with the other symbols. Only in the 1 0 1 Steady Cross special case of the Steady cross and red 1 1 0 Steady Cross and red arrow arrow dip switch selection, the red Arrow- 1 1 1 Nothing displayed Cross symbol is displayed alone in the panel. The dip switch configuration (DS3) defines the internal panel In the Steady cross and red arrow dip sizing and has the following settings: switch selection, only the cross is dis- played if the panel is in 16x16 resolution. Bit 3 Bit 2 Bit 1 Panel Dimensions 0 0 0 16 x 16 0 0 1 16 x 32 0 1 0 16 x 48 0 1 1 16 x 64 1 0 0 16 x 80 1 0 1 Reserved - Must be 0 1 1 0 Reserved - Must be 0 1 1 1 Reserved - Must be 0 2 Specifications are subject to change without notice (23.06.2015)