DuplineSafe Du line Configuration and Test Unit Fieldbus Installationbus Type GS 7380 0080 Portable Configuration and Test Unit Configures the DuplineSafe Relay Output module GS38300143230 Configures the DuplineSafe Input module GS75102101 Monitoring of DuplineSafe Input module status LCD-display 12-key tactile keyboard Supplied by standard 9V battery ADAPT 7380 included Product Description Ordering Key GS 7380 0080 Configuration and Test Unit DuplineSafe bus in Test Unit Type: Dupline for DuplineSafe. Configures mode. Type no. DuplineSafe Safety Relay Output module type number Highly recommended for GS38300143230 and DuplineSafe system start- DuplineSafe Safety Input up, troubleshooting and module type number maintenance. GS75102101. Monitors the Type Selection Supply Specifications Power supply 9V battery (not included) Supply Ordering no. Type 6LR61 Internal battery GS 7380 0080 Battery Life Time (Sleep) Typ. 2 years Product Specifications General Specifications Display 2 x 16 characters Environment Type LCD Degree of protection IP 40 Height of dots 5 mm Pollution degree 3 (IEC 60664) Operating temperature 0 to +50C (+32 to +122F) Keyboard Tactile keys Storage temperature -20 to +60C (-4 to +140F) No. of keys 12 Channel keys 1-8 Humidity (non-condensing) 20 to 80% Command keys (scroll up/down) Mechanical resistance NO , YES , READ/ON Shock 15 G (11 ms) Cable 1 GS73800080 to Adapt 7380 Vibration 2 G (6 to 55 Hz) or safety module Dimensions (l x w x d) 145 x 90 x 28 mm GS73800080 connector 1 6/6 modular plug Material ABS, grey Adapt 7380 1 6/6 modular plug Weight 250 g excluding battery Programmer cable GAP-CAB Cable 2 GS73800080 to Safety module GS73800080 connector 1 6/6 modular plug Safety module connector GRIP Test cable GTU8-GRIB-CAB Specifications are subject to change without notice (06.02.2008) 1 Dupline is a registered trademark. A product of the CARLO GAVAZZI GroupGS73800080 Du line Fieldbus Installationbus Configuration Mode When connecting to a DuplineSafe Next, you must enter whether the cur- lowed by the text Enter Sync. Chan- Safety Relay Output module directly or rently connected Safety Relay Output nel: A1. to a Safety Input module through the module should generate the sync Here the Sync. Channel used in the Adapt 7380, configuration mode is channel, or if it should just listen to a connected DuplineSafe system must enabled. This is done automatically sync channel generated by another be entered. Press the No button to when activating the unit where the text Safety Relay Output module. change the Sync. Channel, or press Configurator mode selected is the Yes button to use the default A1 shown shortly in the display, followed channel. by the text Config Unit begin . Now When the Yes button is pressed, the pressing the Read / On or the Yes GTU unit will try to lock on to the button will start the reading of the con- Press the button 1 for Yes and the Sync. Channel. During this operation, nected unit, Reading Configuration is button 2 for No. Press the button the words Please Wait. Locking shown in the display while reading is in No to go back and press the button Sync.* will be shown in the display. progress. Yes to approve. If the sync. Channel is found, the text Output Unit: Finally, enter if the Output unit should Sync. Channel Locked to: xx (xx is If a Safety Relay Output module is use Automatic or Manual restart. the channel entered) will be shown in connected the following screen will the display, or else Sync. Channel Not now be shown: Found will be displayed, and the Sync. Channel can be reentered. Press the button 1 for Yes and the If the Sync. Channel is OK, the top line button 2 for No. Press the button in the display will show UNITS ON Here the number of channels selected No to go back and press the button GROUP.A and the bottom line will on the Dupline channel generator must Yes to approve. show the current state of the Safety be entered. Press No to change, Input modules on group A: press Yes to approve and continue. Now the following text will appear: The next thing to do is selecting the Send data to unit Yes / No. Press Explanation of symbols used in the channels where Safety Input modules button Yes to send the entered con- bottom line: are placed. The following screen is figuration to the connected Safety 1. S: The Sync. Channel is placed on shown on the display (Note. In Grp.A Relay Output module. Press No to this Dupline channel. channels 1 and 2 are not selectable): reenter the configuration data. 2. -- The Channels are unused. 3. Ordinary numbers, e.g 34: An Input Unit: Input unit is placed on these channels If a Safety Input module is connected and its not activated. through the ADAPT 7380, the following 4. Darkened numbers, e.g : The black numbers show that a Safety screen will be shown: An Input unit is placed on these chan- Input is selected for these channels. nels and its activated. The ordinary big numbers show that the channels are not used. To change Press button Yes to go to the next channels 1,2 use button 1 or 2. To group or press No to go to the previ- change As shown, a cursor will start at the first ous group. channels 3,4 use button 3 or 4, letter. Enter the letter required. The let- channels 5,6 use button 5 or 6, ters on the Configuration and Test Unit Low Battery channels 7,8 use Button 7 or 8. buttons work just like on a cell phone If, when activating the Configuration Use button No to go back and but- (e.g. press 3 times on button 2 to get and Test Unit, * LOW BATTERY * is ton Yes to approve. Selecting Safety an F). Press Yes to go forward and showed in the display, it is time for Inputs must be done for all used press No to go back. changing the battery. The unit will con- Dupline groups. tinue to work, but it is recommended When done, the following text will that the battery is changed. The bat- Next, the synchronization channel appear: Send data to unit Yes / tery is changed by dismounting the 4 must be entered. No. Press button Yes to send the screws on the back of the unit and entered configuration to the connected removing the back cover. After that, Safety Input module. Press No to take out the PCB, change the 9V bat- reenter the configuration data. tery and then reassemble the unit. Press No to change Sync Test Unit mode channel and Yes to approve. The let- When connecting to a DuplineSafe ters on the Configuration and Test Unit bus, the Test Unit mode is entered. buttons works just like on a cell phone When activating the unit as described (e.g. press 3 times on button 2 to get above the text GTU mode selected an F). is shown shortly on the display, fol- 2 Specifications are subject to change without notice (06.02.2008) Dupline is a registered trademark. A product of the CARLO GAVAZZI Group