Proximity Inductive Sensors Standard range, Nickel-Plated Brass Housing Types ICB, M12 Sensing distance: 2 mm Flush type Short and long body versions Rated operational voltage (U ): 10 - 36 VDC b Output: DC 200 mA, NPN or PNP Normally open, Normally closed LED indication for output ON Protection: reverse polarity, short circuit, transients Cable and M12 plug versions According to IEC 60947-5-2 Higher resistance to magnetic field CSA certified for Hazardous Locations Product Description Ordering Key ICB12SF02NOM1 Type A family of inductive proxim- high sensing range is Housing style ity switches in industrial requested. Housing material standard nickel-plated brass Output is open collector Housing size housings. They are able to NPN or PNP transistors. Housing length handle applica tions where Detection principle Sensing distance Output type Output configuration Connection Type Selection Connec- Body Rated Ordering no. Ordering no. Ordering no. Ordering no. tion style operating NPN PNP NPN PNP distance S Normally open Normally open Normally closed Normally closed n Cable Short 2 mm ICB 12 SF 02 NO ICB 12 SF 02 PO ICB 12 SF 02 NC ICB 12 SF 02 PC Plug Short 2 mm ICB 12 SF 02 NOM1 ICB 12 SF 02 POM1 ICB 12 SF 02 NCM1 ICB 12 SF 02 PCM1 Cable Long 2 mm ICB 12 LF 02 NO ICB 12 LF 02 PO ICB 12 LF 02 NC ICB 12 LF 02 PC Plug Long 2 mm ICB 12 LF 02 NOM1 ICB 12 LF 02 POM1 ICB 12 LF 02 NCM1 ICB 12 LF 02 PCM1 Specifications Rated operational voltage (U ) 10 to 36 VDC (ripple incl.) Indication for short circuit/ b overload LED blinking Ripple 10% Assured operating Output current (I ) 200 mA 50C e sensing distance (S ) 0 S 0.81 x S a a n ( 150 mA 50-70C) Effective operating OFF-state current (I ) 50 A r distance (S) 0.9 x S S 1.1 x S r n r n No load supply current (I ) 15 mA O Usable operating distance (S ) 0.9 x S S 1.1 x S u r u r Voltage drop (U) Max. 2.5 VDC 200 mA d Repeat accuracy (R) 10% Protection Reverse polarity, Differential travel (H) short-circuit, transients (Hysteresis) 1 to 20% of sensing dist. Voltage transient 1 kV/0.5 J Ambient temperature Power ON delay (t) 300 ms v Operating -25 to +70C (-13 to +158F) Operating frequency (f) 2000 Hz Storage -30 to +80C (-22 to +176F) Indication for output ON Activated LED, yellow Shock and vibration IEC 60947-5-2/7.4 NO version Target present Housing material NC version Target not present Body Nickel-plated brass Front Grey thermoplastic polyester Specifications are subject to change without notice (18.01.2017) 1ICB, M12 Specifications (cont.) Connection Approvals (cont.) 2 Cable 2 m, 3 x 0.25 mm , CCSAUS As Process Control grey PVC, oil proof Equipment for Hazardous Note: The terminal connector Plug M12 x 1 Locations. (version ...M1) was not evalu- - Class I, Division 2, Degree of protection IP 67 ated. The suitability of the ter- Groups A, B, C and D. Weight (cable/nuts included) minal connector should be - T5, Enclosure Type 4. Cable Max. 120 g determined in the end-use Ambient temperature Plug Max. 30 g application. Ta: -25 to +60C. Dimensions See diagrams below CCC is not required for Tightening torque products with a maximum Distance from sensing face operating voltage of 36 V from 2 mm to 5 mm 4 Nm CE-marking Yes > 5 mm 10 Nm EMC protection According to IEC 60947-5-2 Approvals IEC 61000-4-2 (ESD) 8 KV air discharge, UL (CULUS), CSA As Industrial Control 4 KV contact discharge Equipment - Proximity IEC 61000-4-3 3 V/m Switches. IEC 61000-4-4 2 kV Types 1, 4, 4X or 12. IEC 61000-4-6 3 V Max ambient temperature IEC 61000-4-8 30 A/m 40C. Dimensions 65 50 7.5 7.5 1 47 1 32 LED LED Short body, flush version, cable Long body, flush version, cable 51 66 4 3 4 3 1 2 1 2 1 30 11 1 45 11 LED LED Short body, flush version, plug Long body, flush version, plug 2 Specifications are subject to change without notice (18.01.2017)