ICS08L45F20M5PO Carlo Gavazzi

ICS08 IO-Link 3-wire DC Miniaturized proximity inductive sensors with IO-Link communication Benefits A complete family. Available in M8 male thread robust stainless steel housings with an operating distance of 2 to 4 mm. Easy to install. Both flush and non-flush construction are available. The user can choose between short and long body housings in 2 m PVC cable or M8-disconnect plug versions. High precision. The onboard advanced microcontroller ensures better stability with respect to environmental influences, with highly repeatable measurements between -25 and +80C. Easy customization to specific OEM requests: different cable lengths and materials, special labelling, customized pig-tail solutions with special cables and connectors are possible on request. Only for IO-Link sensors The output can be operated either as a switching output Description or in IO-Link mode. Fully configurable via IO-Link v1.1. Electrical outputs ICS08 series represents the optimal solution for can be configured as PNP/NPN/Push-pull, normally industrial automation equipment in applications open or normally closed. Timer functions can be set, such as switch-on and where space is limited, but long switching switch-off delay distance is needed, including tool-selection and Adjustable sensing distance and hysteresis: sensing textile machines. The advanced electronics is distance can be set to 50% or 100% of the maximum encapsulated in a robust stainless steel housing. sensing distance The availability of the M8-plug and 2m-PVC cable Temperature monitoring: over or under-run temperature connection in short or long housing construction alarms can be set allows flexible mounting. On-board IO-Link communication opens up many possibilities, such as easy configuration and set- up of the devices and advanced parameter setting. Applications Non contact detection of metal objects in general position-sensing and presence-sensing in industrial applications Particularly suitable for rotational speed monitoring thanks to the high operating frequency Main functions Integrated diagnostic function with flashing LED in the event of a short circuit or overload 11/05/2018 ICS08 IO-Link 3-wire DC DS EN Carlo Gavazzi Automation S.p.A. 1ICS08 IO-Link 3-wire DC IO-Link sensors The devices can be operated in IO-Link mode once connected to an IO-Link master, or in standard I/O mode. In IO-Link mode the switching signals of the sensor are made available in the process data via the IO-Link interface. Several sensor functions can be set via the IO-Link interface: Adjustable switching distance: 50% or 100% of the maximum switching distance. Adjustable hysteresis: standard or increased value. Divider function: the sensor gives a signal after a specified number of actuation pulses has been reached. Switch-on delay: the switching pulse is generated after the sensor actuation. Switch-off delay: the generation of the switch signal is delayed by the set time after sensor actuation. Temperature error: temperature is out of specifications. Temperature over-run and under-run: temperature is out of the limits defined by the user. References Order code I C S 08 Enter the code option instead of Code Option Description I - Inductive sensor C - Cylindrical housing with threaded barrel S - Stainless steel housing 08 - M8 housing S30 Short housing with thread barrel of 30 mm L45 Long housing with thread length of 45 mm F Flush N Non-flush 20 Sensing distance 2mm 40 Sensing distance 4mm M5 M8 plug A2 2 m PVC cable NO NPN normally open output NC NPN normally closed output PO PNP normally open output PC PNP normally closed output IO IO-Link programmable version Additional characters can be used for customized versions. 11/05/2018 ICS08 IO-Link 3-wire DC DS EN Carlo Gavazzi Automation S.p.A. 2