Photoelectrics Diffuse-reflective Type PA18C.D..., DC Miniature sensor range Range: 1 m (Axial), 0.8 m (Radial) Sensitivity adjustment by potentiometer Modulated, red light 625 nm Supply voltage: 10 to 30 VDC Output: 100 mA, NPN or PNP, N.O & N.C. Degree of protection IP67, IP69K LED indication for output, stability and power ON Protection: reverse polarity, short circuit and transients Cable and plug versions Excellent EMC performance Product Description Ordering Key PA18CAD10PAM1SA The PA18CAD10... is part of Compact housing and high Type a family of inexpensive gen- power LED for excellent Housing style eral purpose diffuse reflective performance-size ratio. Housing size sensors in industrial standard The potentiometer used for Housing material 18 mm cylindrical ABS hous- adjustment of the sensitivi- Housing type axial ing. ty makes the sensors highly Detection principle The sensors are useful in flexible. The output type is Sensing distance applications where high-ac- NPN or PNP and the output Output type curacy detection as well as switching function is NO and Output configuration small size is required. NC. Connection type Sensitive adjustment Type Selection Housing style Range Connection Ordering no. Ordering no. S NPN PNP n Make & break switching Make & break switching M18 Axial type 1 m Cable PA 18 CAD 10 NASA PA 18 CAD 10 PASA M18 Axial type 1 m Plug PA 18 CAD 10 NAM1SA PA 18 CAD 10 PAM1SA M18 Radial type 0.8 m Cable PA 18 CRD 08 NASA PA 18 CRD 08 PASA M18 Radial type 0.8 m Plug PA 18 CRD 08 NAM1SA PA 18 CRD 08 PAM1SA Specifications according to EN60947-5-2 Rated operating distance (S) No load supply current (I ) 25 mA 24 VDC n o Axial type (A) Up to 1 m, Minimum operational current (I ) 0.5 mA m Radial type (R) Up to 0.8 m OFF-state current (I ) 100 A r reference target Kodak test Voltage drop (U ) 2.0 VDC 100 mA d card R27, white, 90% reflective, 200 x 200 mm Protection Short-circuit, reverse polarity and transients Blind zone 2 mm Sn max. Light source InGaAlP, LED, 625 nm Sensitivity control Adjustable by potentiometer Electrical adjustment 210 Light type Red, modulated Mecanical adjustment 240 Sensing angle 2 Adjustable distance Ambient light 30.000 lux Axial types 50-1000 mm Incandescent lamp Radial types 50-800 mm Light spot Diameter 30 mm 0.5 m Temperature drift 0.2%/C Operating frequency 500 Hz Hysteresis (H) Response time (differential travel) 20% OFF-ON (t ) 1.0 ms ON Rated operational volt. (U ) 10 to 30 VDC (ripple included) B ON-OFF (t ) 1.0 ms OFF Ripple (U ) 10% rpp Power ON delay (t ) 100 ms v Output current Output function Continuous (I ) 100 mA e Type NPN or PNP Short-time (I) 100 mA Switching function NO and NC (max. load capacity 100 nF) Specifications are subject to change without notice (15.06.2017) 1 PA18C.D... Specifications (cont.) Housing material Indication Body ABS, grey Output ON LED, yellow Front material PMMA, red Signal stability and power ON LED, green Cable gland POM, Black Environment Trimmer shaft POM, Dark Grey Installation category III (IEC 60664/60664A Locknuts PBTB, black 60947-1) Mounting bracket PPA, black Pollution degree 3 (IEC 60664/60664A Connection 60947-1) Cable PVC, grey, 2 m Degree of protection IP 67, IP 69K* 2 4 x 0.25 mm , = 4.5 mm Ambient temperature Plug M12, 4-pin Operating -25 to +60C (-13 to +140F) (CONB14NF-series) Storage -40 to +70C (-40 to +158F) Weight With cable: 85g Vibration 10 to 150 Hz, 1 mm/15 g With plug: 25 g (IEC 60068-2-6) CE-marking Yes Shock 30 g / 11ms, 3 pos, 3 neg per axis Approvals cULus (UL508) (IEC 60068-2-6, 60068-2-32) supply class 2 Rated insulation voltage 500 VAC (rms) IEC protection class III 90 * The IP69K test according to DIN 40050-9 for high-pressure, high-temperature wash-down applications. The sensor must not only be dust tight (IP6X), but also able to withstand high-pressure and steam cleaning. 60 The sensor is exposed to high pressure water from a spray nozzle that is fed with 80C water at 8000 10000 KPa (80100bar) and a flow rate of 146L/min. The nozzle is held 100 150 mm from the sensor at angles of 0, 30, 60 and 90 for 30s each. The test device sits on a turntable that rotates with a speed of 5 30 times per minute. The sensor must not suffer any damaging effects from the high pressure water in appea- rance and function. 0 Operation Diagram Operation Diagram tv = Power ON delay ON Power supply OFF Present Object Not Present Tv ON Break Output (N.C.) OFF Tv ON Make Output (N.O.) OFF Wiring Diagrams NPN PNP V V 1 BN 1 BN 4 BK 2 WH 2 WH 4 BK 3 BU 3 BU V GND V GND 2 Specifications are subject to change without notice (15.06.2017)