Photoelectrics Retro-reflective Type PA18C.R..., DC Miniature sensor range Range: 6.5 m (Axial), 5 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: 10 to 30 VDC Output: 100 mA, NPN or PNP, N.O & N.C. Degree of protection IP67, IP69K LED indication for output, stability and power ON Protection: reverse polarity, short circuit and transients Cable and plug versions Excellent EMC performance Product Description Ordering Key PA18CAR65PAM1SA The PA18C.R... is part of a family Compact housing and high Type of inexpensive general purpose power LED for excellent Housing style retro-reflective sensors in indus - performance-size ratio. Housing size trial standard 18 mm cylindrical The potentiometer used for Housing material ABS housing. adjustment of the sensitivity Housing type axial The sensors are useful in appli- makes the sensors highly flex - Detection principle cations where high-accuracy ible. The output type is NPN or Sensing distance detection as well as small size is PNP and the output switching Output type required. function is NO and NC. Output configuration Connection type Sensitive adjustment Type Selection Housing style Range Connection Ordering no. Ordering no. S NPN PNP n Make & break switching Make & break switching M18 Axial type 6.5 m Cable PA 18 CAR 65 NASA PA 18 CAR 65 PASA M18 Axial type 6.5 m Plug PA 18 CAR 65 NAM1SA PA 18 CAR 65 PAM1SA M18 Radial type 5.0 m Cable PA 18 CRR 50 NASA PA 18 CRR 50 PASA M18 Radial type 5.0 m Plug PA 18 CRR 50 NAM1SA PA 18 CRR 50 PAM1SA Specifications according to EN60947-5-2 Rated operating distance (S) No load supply current (I ) 25 mA 24 VDC n o Axial type (A) Up to 6.5 m, Minimum operational current (I ) 0.5 mA m Radial type (R) Up to 5.0 m OFF-state current (I ) 100 A r reference target ER4 Voltage drop (U ) 2.0 VDC 100 mA d reflector 80 mm Protection Short-circuit, reverse Blind zone 50 mm Sn max. polarity and transients Sensitivity control Adjustable by potentiometer Light source LED, 850 nm Electrical adjustment 210 Mecanical adjustment 240 Light type Infrared, modulated Adjustable distance to target Sensing angle 2 Axial types 50-650 cm Ambient light 30.000 lux Radial types 50-500 cm Incandescent lamp Temperature drift 0.2%/C Light spot Diameter 164 mm 3.25 m Hysteresis (H) Operating frequency 500 Hz (differential travel) 20% Response time Rated operational volt. (U ) 10 to 30 VDC B OFF-ON (t ) 1.0 ms ON (ripple included) ON-OFF (t ) 1.0 ms OFF Ripple (U ) 10% rpp Power ON delay (t ) 100 ms v Output current Output function Continuous (I ) 100 mA e Type NPN or PNP Short-time (I) 100 mA Switching function NO and NC (max. load capacity 100 nF) Specifications are subject to change without notice (14.06.2017) 1 PA18C.R... Specifications (cont.) Housing material Indication Body ABS, grey Output ON LED, yellow Front material PMMA, red Signal stability and power ON LED, green Cable gland POM, Black Environment Trimmer shaft POM, Dark Grey Installation category III (IEC 60664/60664A Locknuts PBTB, black 60947-1) Mounting bracket PPA, black Pollution degree 3 (IEC 60664/60664A Connection 60947-1) Cable PVC, grey, 2 m Degree of protection IP 67, IP 69K* 2 4 x 0.25 mm , = 4.5 mm Ambient temperature Plug M12, 4-pin Operating -25 to +60C (-13 to +140F) (CONB14NF-series) Storage -40 to +70C (-40 to +158F) Weight With cable: 85 g Vibration 10 to 150 Hz, 1 mm/15 g With plug: 25 g (IEC 60068-2-6) CE-marking Yes Shock 30 g / 11ms, 3 pos, 3 neg per axis Approvals cULus (UL508) (IEC 60068-2-6, 60068-2-32) supply class 2 Rated insulation voltage 500 VAC (rms) IEC protection class III 90 * The IP69K test according to DIN 40050-9 for high-pressure, high-temperature wash-down applications. The sensor must not only be dust tight (IP6X), but also able to withstand high-pressure and steam cleaning. 60 The sensor is exposed to high pressure water from a spray nozzle that is fed with 80C water at 8000 10000 KPa (80100bar) and a flow rate of 146L/min. The nozzle is held 100 150 mm from the sensor at angles of 0, 30, 60 and 90 for 30s each. The test device sits on a turntable that rotates with a speed of 5 30 times per minute. The sensor must not suffer any damaging effects from the high pressure water in appea- rance and function. 0 Operation Diagram Operation Diagram tv = Power ON delay ON Power supply OFF Present Target Not Present Present Object Not Present Tv ON Break Output (N.C.) OFF Tv ON Make Output (N.O.) OFF Wiring Diagrams NPN PNP V V 1 BN 1 BN 4 BK 2 WH 2 WH 4 BK 3 BU 3 BU V GND V GND 2 Specifications are subject to change without notice (14.06.2017)