Photoelectrics Diffuse-reflective Type PA18CLD0.T, AC, PBTP-housing Range: 400 mm adjustable 100, 200 or 400 mm fixed Modulated, infrared light Supply voltage: 20 to 250 VAC Output: 500 mA SCR Make or break switching function, LED indication High immunity to ambient light Cable and plug versions Product Description Ordering Key PA18CLD04TCM6SA The PA18CLD.. is a family of sensing performance. The Type inexpensive general purpose sensors are simple to use Housing style Diffuse-reflective sensors in and no adjustment are ne - Housing size industrial standard 18 mm cessary (except 400 mm dif- Housing material cylindrical PBTP housing. fuse adjustable type). The Housing length They are useful for simple output is a 2-wire NO or NC Detection principle applications where a basic thyristor (SCR) output. Sensing distance sensor provides adequate Output type Output configuration Connection type Adjustable Type Selection Housing Rated Ordering no. Ordering no. Ordering no. Or der ing no. diameter operating SCR/Cable SCR/Plug SCR/Cable SCR/Plug dist. (Sn) Make switching Make switching Break switching Break switching M 18 100 mm fixed PA18CLD01TO PA18CLD01TOM6 PA18CLD01TC PA18CLD01TCM6 M 18 200 mm fixed PA18CLD02TO PA18CLD02TOM6 PA18CLD02TC PA18CLD02TCM6 M 18 400 mm fixed PA18CLD04TO PA18CLD04TOM6 PA18CLD04TC PA18CLD04TCM6 M 18 400 mm adjust. PA18CLD04TOSA PA18CLD04TOM6SA PA18CLD04TCSA PA18CLD04TCM6SA Note: Plugs to be ordered separately Specifications Rated operating dist. (S ) Min. operational current (I ) 10 mA n m Adjustable Up to 400 mm OFF-state current (I ) Max < 5 mA, typ. 2.6 mA r Fixed 100, 200 or 400 mm Voltage drop (U ) Max 10 V, typ. 7 VAC d Reference target: Protection Transients Kodak test card R27, white, Transient voltage Max 1 kV/0,5 J 90% reflectivity Size: S < 400 mm 100 x 100 mm n Light source GaAlAs LED, 880 nm S 400 mm 200 x 200 mm n Light type Infrared, modulated synchronized Sensing angle 25 at 1/2 range Sensitivity Ambient light Max 10 000 lux Adjustable type only 270 turn potentiometer, Operating frequency (f) 20 Hz, light/dark ratio 1:2 Temperature drift 0.4%/K Response time Hysteresis (H) OFF-ON (t ) 20 ms ON (Differential travel) 3 to 20%, ON-OFF (t ) 30 ms OFF Rated operational volt. (U ) 20 to 250 VAC, B Power ON delay (t ) Typ. 100 ms 45 to 65 Hz V Indication function Dark (NC) or light (NO) switching Output current (AC12, AC140) Output ON LED, yellow Continuous (I ) 500 mA e Short-time (I) 3 A, max. 20 ms Specifications are subject to change without notice (27.02.2006) 1PA18CLD04T Specifications (cont.) Environment Housing material Overvoltage category III (IEC 60664/60664A 60947-1) Body PBTP, grey thermoplastic Pollution degree 3 (IEC 60664/60664A 60947-1) polyester Degree of protection IP 67 (IEC 60529 60947-1) Front Luran , black Cable end Polyester, black Temperature Nuts Reinforced nylon Operating -20 to +60C (-4 to 140F) Storage -30 to + 70C (-22 to 158F) Connection 2 Cable Grey, 2 m, 2 x 0.5 mm , Vibration 10 to 150 Hz, 0.5 mm/- oilproof PVC, 7.5 g (IEC 60068-2-6) Plug M12 x 1 Shock 2 x 1 m 100 x 0.5 m Cables for plug (M6) CON.6A-... series (IEC 60068-2-32) Weight Dielectric voltage 1600 VAC Cable version 105 g (IEC 60364-4-41) Plug version 22 g Approvals UL, CSA CE-marking Yes Operation Di a gram Power supply Object present, light received Tv Output ON: Make switch ing (NO) Tv Break switching (NC) Dimensions Wiring Diagrams 2 BN 3 BU 2 BN 3 BU M12 x 1 Note: Sensitivity only 400 mm adjustable Installation Hints To avoid interference from inductive voltage/ Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables Incorrect Correct Any repetitive flexing of the The cable should not be pulled A proximity switch should not serve as mechanical stop cable should be avoided 2 Specifications are subject to change without notice (27.02.2006)