Photoelectrics, Fibre Optic Sensor Colour Sensor Type PD12CNC0.BPM1T Range: From 2 to 60 mm, fibre dependent Teach-In (keyboard or remote setup) Keyboard lock Detection of 1 or 1 to 4 recorded colours Microprocessor controlled and EEPROM parameter storage Operational voltage 24 V DC Output 100 mA, NPN and PNP Light or dark switching selectable M12 standard plug IP65 protection Timer: One shot function 0.05 to 5 s Product Description Ordering Key PD12CNC04BPM1T The Colour Sensor is a fibre of the built-in timer. The out- Type optic amplifier made specifi- put function can also be pro- Housing style cally for recognition of 1 or 1 grammed to be either NO or Housing size to 4 colours. Teaching of the NC. Housing material colours is easily performed The colour sensor is used for Not used by means of the Teach-in detection of coloured labels, Colour sensor function. Each colour has a marks, tags, wires, liquids, Number of channels separate output which can be etc. Output type delayed up to 5 sec by means Output configuration Connection type Teach-In mode Type Selection Amplifier Housing Range Ordering no. Ordering no. W x H x D 1-channel 4-channel 61 x 115 x 26 mm 2 to 60 mm PD12CNC01BPM1T PD12CNC04BPM1T Type Selection Fibres Detection distance Spot Cable length Ordering no. 18 mm 1.5 mm 1000 mm FPDC01SCC100 40 - 60 mm 6.0 mm 1000 mm FPDC02SCC100 4 - 6 mm Small tip 1000 mm FPDC03SCC100 2 - 4 mm 12 mm Needle-nose tip 1000 mm FPDC04SCC100 2 - 4 mm 40 mm Needle-nose tip 1000 mm FPDC05SCC100 Specifications Detection distance (S) 2 to 60 mm, (fibre-dependent) Voltage drop (U ) n d Analysis type True RGB analysis I = 100 mA 2.2 VDC L I = 10 mA 0.5 VDC L Teach input Active 4 to 24 VDC 10 s minimum Not active 1 VDC Timer Range programmable 0 to 5 s Recording time 1 sec First step 50 ms Levels of sensitivity Fine, medium and low Following steps 250 ms Temperature drift < 0,4%/C Protection Short-circuit, reverse pola- Rated operational volt. (U ) 24 VDC 10% B rity, transients (ripple included) Light source LED, red, green and blue Ripple (U ) 10% rpp Spot diameter 0.5 mm Output current Ambient light Continuous (I ) 100 mA e Incandescent light 3000 Lux Short-time (I) 100 mA Sunlight 5000 Lux No load supply current (I ) 120 mA o Specifications are subject to change without notice (13.01.2014) 1 125 4,2 5 115 L PD12 Specifications (cont.) Switching frequency Shock 2 x 1 m & 100 x 0.5 m Mode short distance 500 Hz (IEC 60068-2-6, 60068-2-32) Mode long distance 25 Hz Rated insulation voltage 50 VAC (rms) Housing material Response time Body Polycarbonate OFF-ON (t ) 1 ms ON Tip NPB or anodized aluminium ON-OFF (t ) 20 ms OFF Tip dimensions 1.8 - 18 mm Power ON delay (t ) 300 ms Sheath PVC v Length (for each reference) 60 cm and 100 cm Output function NPN and PNP Available (Push-pull output) Connection Plug M12 Indication function Signal, Teach-in, Output ON Weight 150 g Environment Approvals cUL Installation category I (IEC 60664/60664A 60947-1) CE-marking Yes Pollution degree 3 (IEC 60664/60664A 60947-1) Degree of protection IP 65 (IEC 60529 60947-1) Temperature Operating 0 to +40C (32 to +104F) Storage -20 to +60C (-4 to +140F) Vibration 10 to 150 Hz, 0.5 mm/7.5 g (IEC60068-2-6) Wiring Diagram Fibers Dimensions and Specifications 8 8 M1M18 8 x x 1100 00 1-channel type: plug 1 4-channel type: plugs 1 and 2 39 39 ,3,3 1 2 20,20,11 1000 1000 mmmm 57 57 ,5,5 M8M8 x x 10100 0 Brown White 8 8 9 9 +supply Output 2 N Output 1 Black Black Output 3 16 16 ,3,3 1000 1000 mmmm 26 26 ,3,3 P 2020,1,1 - supply Blue Blue Output 4 Remote White record 2,2 M4 12 channel 1 23 1000 mm Dimensions 20,1 2,2 M4 40 51 1000 mm 20,1 Color Sensor SPOT 1 Fibre heads Tip Distance TR Application mm 2 FPDC01...100 M18 1.5 18 mm 1 mS Fine detection with focus spot 3 Fine detection at fluctuating FPDC02...100 M18 6 40-60 mm 20 mS distance 4 Fine detection with small tip FPDC03...100 M8 1.5 4-6 mm 1 mS dimensions FiFibrbre heade headss TiTipp SPOSPOTT DiDiststanceance TrTr ApAppliplicatcatioionn M4 + extension Fine detection with the smallest FPDC04...100 2-3 2-4 mm 1 mS 1.8 x 12 head mmmm M4 + extension Fine detection with the smallest FPDC05...100 2-3 2-4 mm 1 mS 1.8 x 40 head and pliable extension FPFPDCDC0101...1...10000 M1M188 1,1,55 18 18 mm mm 22 1 1 mSmS FiFinene dedetetectctioion n wiwithth fofocucusesed d sspotpot 2 Specifications are subject to change without notice (13.01.2014) FPFPDCDC0202...1...10000 M1M188 66 50 50 mm mm -1-100 20 20 mSmS FiFinene dedetetectctioion n atat u uctctuatuatining g didiststancancee FPFPDCDC0303...1...10000 M8M8 1,1,55 6 6 mmmm 1 1 mSmS FiFinene dedetetectctioion n wiwithth smsmalall til tip p didimemensnsioionsns FPFPDCDC0404...1...10000 M4M4 + + exextetensnsioion n 2-2-33 2 2 44 mmmm 1 1 mSmS FiFinene dedetetectctioion n wiwithth ththe e smsmaallellestst 1.1.8x8x1212 heheadad.. FPFPDCDC0505...1...10000 M4M4 + + exextetensnsioion n 2,2,33 2 2 44 mmmm 1 1 mSmS FiFinene dedetetectctioion n wiwithth ththe e smsmaallellestst 1.1.8x8x4040 heheadad andand plpliaiablble e exextetensnsioionn 61 26 51 5 1 2 1., 8 1., 8