Photoelectrics Retro-reflective, Polarized Type PD30CNP06....MU Miniature sensor range Range: 6 m, with reflector Sensitivity adjustment by Teach-In programming Modulated, red light 660 nm, polarized Supply voltage: 10 to 30 VDC Output: 100 mA, NPN or PNP preset Make and break switching function programmable LED indication for output, stability and power ON Protection: reverse polarity, short circuit and transients Cable and plug versions Excellent EMC performance Mute function (Sensor blanking) Product Description Ordering Key PD30CNP06PPM5MU The PD30CNP06 sensor The Teach-In function for Type family comes in a compact adjustment of the sensitivi- Housing style 10 x 30 x 20 mm reinforced ty makes the sensors highly Housing size PMMA/ABS housing. flexible. The output type is Housing material The sensors are useful in preset (NPN or PNP), and the Housing length applications where high-ac- output switching function is Detection principle curacy detection as well as programmable (NO or NC). Sensing distance small size is required. The mute function can be Output type Compact housing and high used for testing the sensor Output configuration power LED for excellent per- for: Malfunctioning, discon- Connection type formance-size ratio. nection, optical axis adjust- Mute ment, dusty and dirty lenses. Type Selection Housing Range Connection Ordering no. Ordering no. W x H x D S NPN PNP n Make or break switching Make or break switching 10 x 30 x 20 mm 6 m Cable PD 30 CNP 06 NPMU PD 30 CNP 06 PPMU 10 x 30 x 20 mm 6 m Plug PD 30 CNP 06 NPM5MU PD 30 CNP 06 PPM5MU Note: Reflectors to be ordered seperately Specifications Rated operating distance (S ) Up to 6 m, with reflector Light type Red, modulated n 80 mm (ER4) Sensing angle 2 4 m on ER4060 reflector Ambient light 10,000 lux Light spot 110 mm 1.5 m Blind zone 100 mm Operating frequency 1000 Hz Sensitivity Adjustable by Teach-In Response time Temperature drift 0.1%/C OFF-ON (t ) 0.5 ms ON Hysteresis (H) ON-OFF (t ) 0.5 ms OFF (differential travel) 10% Power ON delay (t ) 300 ms v Rated operational volt. (U ) 10 to 30 VDC B Output function (ripple included) NPN and PNP Preset Ripple (U ) 10% rpp NO/NC switching function Set up by button Output current Mute function Continuous (Ie) 100 mA Emitter off 0 to 3 sec 0 to 2.5 VDC (NPN) Short-time (I) 100 mA 5 to 30 VDC (PNP) (max. load capacity 100 nF) Emitter power > 3 sec 0 to 2.5 VDC (NPN) No load supply current (Io) 30 mA 24 VDC 5 to 30 VDC (PNP) Minimum operational current (Im) 0.5 mA Operating mode Not connected OFF-state current (Ir ) 100 A Indication Voltage drop (Ud ) 2.4 VDC 100 mA Output ON LED, yellow Signal stability ON and power ON LED, green Protection Short-circuit, reverse polarity and transients Environment Installation category III (IEC 60664/60664A Light source GaAlAs, LED, 660 nm 60947-1) Specifications are subject to change without notice (16.09.2014) 1 PD30CNP06....MU Specifications (cont.) Pollution degree 3 (IEC 60664/60664A Housing material 60947-1) Body ABS Degree of protection IP 67 (IEC 60529 60947-1) Front material PMMA, red Ambient temperature Connection Operating -25 to +55C (-13 to +131F) Cable PVC, black, 2 m 2 Storage -40 to +70C (-40 to +158F) 4 x 0.14 mm , = 3.3 mm Plug M8, 4-pin (CON, 54-series) Vibration 10 to 55 Hz, 0.5 mm/7.5 g (IEC 60068-2-6) Weight With cable: 40 g With plug: 10 g Shock 30 g / 11ms, 3 pos, 3 neg per axis CE-marking Yes (IEC 60068-2-6, 60068-2-32) Approvals cULus (UL508) Rated insulation voltage 500 VAC (rms) Operation Diagram tv = Power ON delay ON Power supply OFF Present Object Not Present T < 3 sec. T > 3 sec. ON Mute OFF 100% 50% Emitted power 0% Dirty Optics Clean Tv ON Make Output (N.O.) OFF Tv ON Break Output (N.C.) OFF Wiring Diagrams NPN PNP 1 BN V 1 BN V 4 BK 2 WH Mute 2 WH 4 BK Mute 3 BU 3 BU V (GND) V (GND) Mute input active Mute input active when connected to when connected to GND V+ Detection Diagram Excess Gain 300 100 200 100 0 10 -100 -200 -300 1 02 46 810 0.1 110 (m) Distance (m) 2 Specifications are subject to change without notice (16.09.2014) (mm) Exess gain