Photoelectrics Retro-reflective, Polarized Type PD30CNP60....SA Miniature sensor range Range: 6 m Sensitivity adjustment by Potentiometer Modulated, red light 625 nm, polarized Supply voltage: 10 to 30 VDC Output: 100 mA, NPN or PNP preset Make and break switching function LED indication for output, stability and power ON Protection: reverse polarity, short circuit and transients Cable and plug versions Excellent EMC performance Product Description Ordering Key PD30CNP60NAM5SA The PD30CNP60 sensor The Potentiometer function Type family comes in a compact for adjustment of the sen- Housing style 10 x 30 x 20 mm reinforced sitivity makes the sensors Housing size PMMA/ABS housing. highly flexible. The output Housing material The sensors are useful in type is preset (NPN or PNP), Housing length applications where high-ac- and the output switching Detection principle curacy detection as well as function is NO and NC out- Sensing distance small size is required. put. Output type Compact housing and high Output configuration power LED for excellent Connection type performance-size ratio. Sensitivity adjustment Type Selection Housing Range Connection Ordering no. Ordering no. W x H x D S NPN PNP n Make and break switching Make and break switching 10 x 30 x 20 mm 6 m Cable PD 30 CNP 60 NASA PD 30 CNP 60 PASA 10 x 30 x 20 mm 6 m Plug PD 30 CNP 60 NAM5SA PD 30 CNP 60 PAM5SA Specifications Rated operating distance (S ) OFF-state current (I ) 100 A n r 80 mm (ER4) reflector 6 m Voltage drop (U ) 2 VDC I max d e ER4060 reflector 4 m Protection Short-circuit, reverse polarity Blind zone 100 mm 80 mm (ER4) and transients and ER4060 reflector Light source InGaAIP, LED, 625 nm Sensitivity Light type Red, modulated Electrical adjustmment 210 Emitter angle 2 half sensing Mechanical adjustment 240 distance Temperature drift 0.2%/C Light spot 110 mm 1.5 meters Hysteresis (H) 5% to 20% Ambient light 10,000 lux Rated operational volt. (U ) 10 to 30 VDC B (ripple included) Operating frequency (f) 1000 Hz Ripple (U ) 10% rpp Response time OFF-ON (t ) 0.5 ms Output current ON ON-OFF (t ) 0.5 ms Continuous (Ie) 100 mA OFF Short-time (I) 100 mA Power ON delay (t ) 30 ms v Output function (max. load capacity 100 nF) Open collector NPN or PNP by sensor type No load supply current (Io) 25 mA UB max Minimum operational current (Im) 0.5 mA Specifications are subject to change without notice (18.09.2014) 1 PD30CNP60....SA Specifications (cont.) Output switching function N.O. and N.C. Shock 30 g / 11ms, 3 pos, 3 neg Indication per axis Output ON LED, yellow (IEC 60068-2-6, 60068-2-32) Signal stability ON and Rated insulation voltage 500 VAC (rms) Power ON LED, green. See curve for Housing material condition of stability Body ABS Light Grey Environment Frontglas PMMA Red Installation category III (IEC 60664/60664A Trimmer shaft POM Dark Grey 60947-1) Connection Pollution degree 3 (IEC 60664/60664A Cable PVC, black, 2 m 60947-1) 2 4 x 0.14 mm , = 3.3 mm Degree of protection IP 67 (IEC 60529 60947-1) Plug M8, 4-pin (CON. 54-series) Ambient temperature Weight Operating -25 to +60C (-13 to +140F) Cable version 50 g Storage -40 to +70C (-40 to +158F) Plug version 20 g Vibration 10 to 150 Hz, 1.0 mm/15 G CE-marking Yes (IEC 60068-2-6) Approvals cULus (UL508 + CSA) Operation Diagram tv = Power ON delay ON Power supply OFF Present Target Not Present Tv ON Break Output (N.C.) OFF Tv ON Make Output (N.O.) OFF Signal Stability Indication Wiring Diagrams 1BN NPN Excess Gain 2WH 4BK Operation level x 1.10 1.10 Operation level 1.0 3BU Operation level x 0.90 0.90 1BN PNP Time 4BK Green LED ON 2WH Yellow LED ON 3BU 2 Specifications are subject to change without notice (18.09.2014)