Photoelectrics Through-beam Type PD30CNT15....MU/RT Miniature sensor range Range: 15 m Sensitivity adjustment by Teach-In programming Modulated, Infraredred light 880 nm Supply voltage: 10 to 30 VDC Output: 100 mA, NPN or PNP preset Make and break switching function programmable LED indication for output, stability and power ON Protection: reverse polarity, short circuit and transients Cable and plug versions Excellent EMC performance Mute function (Sensor blanking) Emitter Remote teach - Receiver Product Description Ordering Key PD30CNT15NPM5RT The Teach-In function for The PD30CNT15 sensor Type adjustment of the sensitivi- family comes in a compact Housing style ty makes the sensors highly 10 x 30 x 20 mm reinforced Housing size flexible. The output type is PMMA/ABS housing. Housing material The sensors are useful in preset (NPN or PNP), and the Housing length applications where high-ac- output switching function is Detection principle curacy detection as well as programmable (NO or NC). Sensing distance small size is required. The mute function can be Output type Compact housing and high used for testing the sensor Output configuration power LED for excellent per- for: Malfunctioning, discon- Connection type formance-size ratio. nection, optical axis adjust- Remote teach ment, dusty and dirty lenses. Type Selection Housing Range Connection Ordering no. Ordering no. Ordering no. Ordering no. W x H x D S NPN NPN PNP PNP n Emitter Make or break switching Emitter Make or break switching 10 x 30 x 20 mm 15 m Cable PD 30 CNT 15 NMU PD 30 CNT 15 NPRT PD 30 CNT 15 PMU PD 30 CNT 15 PPRT 10 x 30 x 20 mm 15 m Plug PD 30 CNT 15 NM5MU PD 30 CNT 15 NPM5RT PD 30 CNT 15 PM5MU PD 30 CNT 15 PPM5RT Note: Emitter, Receiver and Connector to be ordered separately. Specifications Emitter EN 60947-5-2 Rated operational volt. (U ) 10 to 30 VDC Protection Reverse polarity, transients B Ripple (U ) 10% Indication function rpp Power supply ON LED, green Supply current 25 mA Mute function Light Source GaAIAs, LED, 880 nm Emitter off 0 to 3 sec 0 to 2.5 VDC (NPN) Optical angle 2 at range 5 to 30 VDC (PNP) Light type Infrared, modulated Emitter half power > 3 sec 0 to 2.5 VDC (NPN) Light spot 110 mm 1.5 m 5 to 30 VDC (PNP) Specifications Receiver EN 60947-5-2 Rated operating distance (Sn) 15 m, with PD30CNT15 Adjustable range 1.5 m to 15 m Emitter resolution 3% on distance Blind zone None Output current Continuous (I ) 100 mA e Sensitivity Adjustable by Teach-In Short-time (I) 100 mA (push button or wire) (max. load capacity 100 nF) No load supply current (I ) 30 mA o Temperature drift 0.3%/C Minimum operational current (I ) 0.5 mA m Hysteresis (H) (differential travel) 10% OFF-state current (I ) 100 A r Rated operational volt. (U ) 10 to 30 VDC Voltage drop (U ) 2.5 VDC 100 mA B d Ripple (U ) 10% rpp Specifications are subject to change without notice (10.02.2017) 1 (inch) PD30CNT15....MU/RT PD30CNT15....MU/RT Specifications Receiver (cont.) EN 60947-5-2 General Specifications EN 60947-5-2 Detection Diagram Excess Gain Protection Short-circuit, reverse polarity Environment Emitter Y and transients Installation category III (IEC 60664/60664A X (feet) Receiver 60947-1) Sensing angle 4 16.5 33 49.5 66 Pollution degree 3 (IEC 60664/60664A 400 16 Ambient light 10,000 lux 1000 60947-1) 12 300 Operating frequency 1000 Hz Degree of protection IP 67 (IEC 60529 60947-1) 8 200 Response time 100 Ambient temperature 100 4 OFF-ON (t ) 0.5 ms ON Operating -25 to +55C (-13 to +131F) 0 0 ON-OFF (t ) 0.5 ms OFF Storage -40 to +70C (-40 to +158F) 10 -4 -100 Power ON delay (t ) 300 ms v Vibration 10 to 55 Hz, 0.5 mm/7.5 g -8 -200 Output function (IEC 60068-2-6) 1 -300 -12 NPN and PNP Preset Shock 30 g / 11ms, 3 pos, 3 neg 1.0 10.0 100.0 NO/NC switching function Set up by button -400 -16 Distance (m) per axis 05 10 15 20 Remote teach (IEC 60068-2-6, 60068-2-32) Sensing range (m) Push button active 0 to 2.5 VDC (NPN) Rated insulation voltage 500 VAC (rms) 5 to 30 VDC (PNP) Housing material Tamper proof When activated more than Body ABS 20 sec. the sensor goes into Front material PMMA, red Signal Stability Indication Accessories a Tamper proof mode. Connection Indication Cable Emitter/receiver PVC, black, 2 m, = 3.3 mm 21.2 Output ON LED, yellow 2 14 4 x 0.14 mm 32.4 Signal stability ON and power ON LED, green 9 1.2 Plug M8, 4-pin (CON, 54-series) 25.4 Excess Gain 3.2 1.2 Weight (each sensor) With cable: 40 g With plug: 10 g Operation level x 1.25 1.25 CE-marking Yes Operation level 1.0 Approvals cULus (UL508) Operation level x 0.75 0.75 13.5 16.2 5.7 6.0 6.0 5.2 Operation Diagram Time Green LED ON tv = Power ON delay Yellow LED ON 4.4 4.4 ON Power supply OFF Mounting bracket: APD30-MB1 Mounting bracket: APD30-MB2 Present Object Not Present T < 3 sec. T > 3 sec. ON Mute (Emitter) OFF Dimensions 100% 50% Emitted power 0% Dirty Optics Clean Cable version Plug version Tv ON Make Output (N.O.) OFF Teach Button* Teach Button* Tv ON Break Output (N.C.) OFF Output LED Power / Stability LED Output LED Power / Stability LED Yellow* Green Yellow* Green Wiring Diagrams 10.6 10.6 10.8 10.8 17 17 Two, 9.5 dia. Two, 9.5 dia. Receiver or emitter Receiver or emitter Receiver Emitter Lenses Lenses Optical axis Optical axis PNPNPP NPNPNN NPNNPN PNPNPP 1 BN1 BN VV 1 BN1 BN VV 1 BN1 BN VV 1 BN1 BN VV 2 WH2 WH 4 BK4 BK 2 WH2 WH MuteMute TeTeacachh 2 WH2 WH 2 WH2 WH 4 BK4 BK MuteMute TeTeacachh Two M3 Two M3 3 BU3 BU 3 BU3 BU 3 BU3 BU 3 BU3 BU VV VV VV VV 10.25 Mute input active when Mute input active when TeTeach input active when ach input active when TeTeach input active when ach input active when Mute input active when Mute input active when * Not avaible on emitter version connected to V+connected to V+ connected to GNDconnected to GND connected to V+connected to V+ connected to GNDconnected to GND 2 Specifications are subject to change without notice (10.02.2017) Specifications are subject to change without notice (10.02.2017) 3 30 1.1 (mm) 25.4 20 22 10.6 5.5 5.5 6 15 Excess Gain 30 1.1 25.4 7.3 10 25.4 10 3.2 16 39 20 22 10.6 8.2 26,3 5.5 5.5 6 4.4 15 3 9 29.3 14