Photoelectrics, Fibre Optic Sensor Contrast Sensor Type PD 60 CNK 18 BP .. Range: 18 mm 2 mm Microprocessor controlled and EEPROM parameter storage Operational voltage 10 - 30 V DC Output 100 mA, NPN and PNP Light or dark switching selectable Cable or M8 standard plug IP65 protection cUL and CE approved Manual contrast set-up Product Description Ordering Key PD60CNK18BPM5T The PD60CNK18BP.. is a a Push-pull output that per- Type fibre optic amplifier made forms both a NPN and a PNP Housing style specifically for plastic fibres output, which are fully pro- Housing size to detect contrast. The sensor tected against short-circuit, Housing material is microprocessor-based and transients and wrong polar- Not used features manual distance ity. The sensor is built in a Plastic fibres setup by keyboard. NO or strong 13 x 30 x 60 mm poly- Sensing distance mm NC (light or dark mode) out- carbonate housing for DIN-rail Output type put is select-able by wiring. mounting. Output configuration The sensor output is built as Connection type Teach-in Type Selection Housing Range Ordering no. Ordering no. W x H x D S NPN and PNP cable NPN and PNP plug n 13 x 30 x 60 mm 18 mm 2 mm PD 60 CNK 18 BP T PD 60 CNK 18 BP M5 T Fibre 100 cm fibre w. M18 lens head FPDK01SCC100 To be ordered separately. Specifications Detection distance 18 mm 2 mm Sunlight 20000 Lux Temperature drift < 0,4%/C Response time OFF-ON (t ) 25 s ON Rated operational volt. (U ) 10 to 30 VDC B ON-OFF (t ) 25 s OFF (ripple included) Power ON delay (t ) 300 ms v Ripple (U ) 10% rpp Output function Output current NPN and PNP Available (Push-Pull output) Continuous (I ) 100 mA e Short-time (I) 100 mA Indication function Insufficient contrast Both green LED and red key No load supply current (I ) 50 mA o flash for 2 s Switching frequency 20 kHz Short-circuit output Both green LED and red key Voltage drop (U ) d flash continuously I = 100 mA 2 VDC L Environment I = 10 mA 1 VDC L Installation category II (IEC 60664/60664A 60947-1) Protection Short-circuit, reverse pola- Pollution degree 3 (IEC 60664/60664A 60947-1) rity, transients Degree of protection IP 65 (IEC 60529 60947-1) Light source White LED Temperature Operating 0 to +40C (32 to +104F) Spot diameter 18 mm 1.5 mm (FPDK01SCC100) Storage -20 to +80C (-4 to +176F) Modulation frequency 40 kHz Vibration 10 to 150 Hz, 0.5 mm/7.5 g Ambient light (IEC60068-2-6) Incandescent light 10000 Lux Specifications are subject to change without notice (13.09.2010) 1 PD60CNK18 BP.. Programming Function Specifications (cont.) Shock 2 x 1 m & 100 x 0.5 m Teach-in SET (IEC 60068-2-6, 60068-2-32) Colour 1 Press for 4 sec. Rated insulation voltage 50 VAC (rms) 1st colour has now been Housing material learned Body Polycarbonate Triangle LED goes ON Connection 2 Cable PVC, black, 2 m, 4 x 0.25 mm SET Plug NPB, M8 x 1 Colour 2 Press for 4 Cable for plug (M5) CONB5A-series sec. Weight 24 g 2nd colour has now been Approvals cUL learned CE-marking Yes Triangle LED goes OFF Output can be inverted by teaching colour 2 first Dimensions 20 25.4 4.1 20 25.4 4.1 60 60 200 24 1 3 Wiring Diagram Keyboard and LED Press for 4 secs: 1st colour is learned, and triangle LED goes ON Press for 4 secs again: 2nd colour is learned, and triangle LED goes OFF 1 BN NPN Micro- 4 BK processor PNP 3 BU Key LED, goes on when a key is hit 2 WH Not used * Insufficient contrast: both green LED and Triangle LED red key flash for 2 s Detection of the lightest * Short-circuit output: colour both green LED and red key flash continuously 2 Specifications are subject to change without notice (13.09.2010) 13 30 SET M8x1 30 13 SET SET