Photoelectrics Retro-reflective, Polarized, Relay Output Type PMP12.. Range: 12 m Modulated, visible light, polarized Make or break switching function (switch selectable) LED-indication for target detected Multi supply voltage: 12 to 240 VDC and 24 to 240 VAC, 50/60 Hz 25 x 65 x 81 mm reinforced PC/ABS- housing, IP 67 NO and NC output High EMC immunity UL, CSA and CE Product De scription Ordering Key PMP12RG The PMP12.. is a power- applications where dust and Type family full polarized retro reflective weather conditions will influ- Type sensor. The sensor is designed ence on the sensing distance. Sensing distance (m) to meet the hash requirements The sensor is made in a strong Output relay in industrial environments. glass reinforced PC/ABS Cable gland type With a sensing distance at housing with two cable glands 12 m the sensor is usefull in for easy connection. Type Selection Housing Range Ordering no. W x H x D (S ) without timer n 25 x 65 x 81 PG 13.5 cable gland 12 m PMP 12 RG 1/2 NPT cable gland 12 m PMP 12 RI Specifications Rated operating dist. (S ) 12 m Optical angle 1.5 n (0 to 5,000 lux) with reflector type ER 4, Light spot size 280 mm at 4 m ref. target Ambient light Max. 5000 lux Blind zone 0.15 m Operating frequency 20 Hz Sensitivity Fixed Response time Temperature drift 0.4 %/C OFF-ON (t ) 20 ms ON Differential travel (H) ON-OFF (t ) 30 ms OFF Hysteresis 3 to 20% Power ON delay (t ) 300 ms (typ. 100 ms) v Rated operational volt. (U ) 10.8 to 264 VDC B Output function Switch selectable, make or 21.6 to 264 VAC, 45 to 65 Hz break switching Rated operational power Indication (relay ON) 2 W (2.5 VA) Target detected LED, yellow Output Environment Contact ratings (AgCdO) (micro gap) Overvoltage category III (IEC 60664/60664A Resistive loads AC 1 3 A/250 VAC 60947-1) DC 1 3 A/30 VDC Pollution degree 3 (IEC 60664/60664A Small inductive loads AC 15 2 A/250 VAC 60947-1) DC 13 3 A/30 VDC Degree of protection IP 67 (IEC 60529 60947-1) 6 Mechanical life (typical) 40 x 10 operations Temperature 5 Electrical life (typical) 5 x 10 operations Operating -25 to +55C (-13 to +131F) at 220 VAC - 3 A resistive Stor age -30 to +80C (-22 to +176F) load: 360 impulses/h Vibration 10 to 150 Hz, 0.5 mm/7.5 g Dielectric voltage 2,000 VAC (rms) (IEC 60068-2-6) (cont./supply) Shock 2 x 1 m & 100 x 0.5 m Light source GaAlAs, LED, 660 nm (IEC 60068-2-32) Light type Visible, modulated Rated insulation voltage 250 VAC (rms) Specifications are subject to change without notice (19.01.2015) 1 PMP12 Specifications (cont.) Connection Diagram Housing material Body PC/ABS, grey Front PMMA, red Cover PC, black LED Cable gland PA, black, reinforced Mounting bracket Steel, galvanized Break * DIP switches ON Connection Make 2 Screw terminal 5 x 2 x 1 mm 12 - 240 VDC Cable gland PG 13.5 or 1/2 NPT 24 - 240 VAC for cable 6 to 10 mm 50/60 Hz Weight 110 g Approvals UL, CSA 30 VDC CE-marking Yes 250 VAC Max. 3 A * Upper position ON (mode 1) Lower position OFF (mode 0) Operation Diagram t = Time delay tv = Power ON delay Power supply Target present Object present Dimensions PMP PMP with angle bracket 25 81 17.5 40 7 61.5 2 Specifications are subject to change without notice (19.01.2015) 67.5 36 2.5 29.5 14.5 Pg 13.5 35.5 or NPT 5 4.3