Photoelectrics Retro-reflective, Industrial Door Market Type PMP12.M, Polarized, Relay Output, Mute Input Range: 12 m Modulated, visible light, polarized Make or break switching function (switch selectable) Make or break Mute function (switch selectable) LED-indication for target detected Multi supply voltage: 24 VDC and 24 VAC, 50/60 Hz 25 x 65 x 81 mm reinforced PC/ABS- housing, IP 67 NO and NC output High EMC immunity CE, UL325 and UL508 approved Product De scrip tion Ordering Key PMP12RGM The PMP12.. is a power- distance. The sensor is made Type family full polarized retro reflect- in a strong glass reinforced Type ive sensor. The sensor is PC/ABS housing with two Sensing distance (m) designed to meet the hash cable glands for easy connec- Output relay requirements in industrial tion. Cable gland type environments. With a sensing With Mute Input on the Mute input distance at 12 m the sensor is transmitter the sensor fullfill usefull in applications where European and North Ameri- dust and weather conditions can regulations for Industrial will influence on the sensing doors Type Selection Housing Range Ordering no. W x H x D (Sn) without timer 25 x 65 x 81 PG 13.5 cable gland 12 m PMP 12 RGM 1/2 NPT cable gland 12 m PMP 12 RIM Specifications Rated operating dist. (S ) 12 m Dielectric voltage 2,000 VAC (rms) n (0 to 5,000 lux) with reflector type ER 4, (cont./supply) ref. target Light source GaAlAs, LED, 660 nm Blind zone 0.15 m Light type Visible, modulated Optical angle 1.5 Sensitivity Fixed Light spot size 280 mm at 4 m Temperature drift 0.4 %/C Ambient light Max. 5000 lux Differential travel (H) Operating frequency 20 Hz Hysteresis 3 to 20% Response time (object related) Rated operational volt. (U ) 24 VDC 20% B OFF-ON (t ) 20 ms ON AC: 45 to 65 Hz 24 VAC 20% ON-OFF (t) 30 ms OFF Rated operational power Power ON delay (t) 300 ms (typ. 100 ms) v (relay ON) 1 W (1.2 VA) Output function Switch selectable, make or Output break switching Contact ratings (AgCdO) (micro gap) Mute function Switch selectable Resistive loads AC 1 3 A/250 VAC Make on 4 VDC/VAC DC 1 3 A/30 VDC Response time output off < 20 ms Small inductive loads AC 15 2 A/250 VAC Make off < 2 VDC/VAC DC 13 3 A/30 VDC Response time output on < 45 ms 6 Mechanical life (typical) 40 x 10 operations Break on < 2 VDC/VAC 5 Electrical life (typical) 5 x 10 operations Response time output off < 45 ms at 220 VAC - 3 A resistive Break off 4 VDC/VAC load: 360 impulses/h Response time output on < 20 ms Specifications are subject to change without notice (06.01.2015) 1 PMP12RGM Specifications (cont.) Connection Diagram Max current 10 mA 24 VDC 16 mA 24 VAC Indication Target detected LED, yellow LED Environment 2 Mute input selection Overvoltage category III (IEC 60664/60664A 1 Output NO/NC ON 60947-1) Pollution degree 3 (IEC 60664/60664A L Power supply: 24 VDC or 60947-1) 24 VAC, 50/60 Hz Degree of protection IP 67 (IEC 60529 60947-1) N Mute input voltage: 24 VDC Temperature or 24 VAC, 50/60 Hz M Operating -25 to +55C (-13 to +131F) Storage -30 to +80C (-22 to +176F) Vibration 10 to 150 Hz, 0.5 mm/7.5 g 30 VDC or 50 VAC, Max. 3 A (IEC 60068-2-6) Shock 2 x 1 m & 100 x 0.5 m (IEC 60068-2-32) Rated insulation voltage 250 VAC (rms) Switch settings Housing material Make mute Make mute Body PC/ABS, grey Front PMMA, red Break switching/NC Make switching/NO Cover PC, black Cable gland PA, black, reinforced Break mute Break mute Mounting bracket Steel, galvanized Break switching/NC Make switching/NO Connection 2 Screw terminal 5 x 2 x 1 mm Cable gland PG 13.5 or 1/2 NPT for cable 6 to 10 mm Weight 110 g UL-Approval cURus UL325, CSA-C22.2 No.247 cULus UL508 CE-marking Yes EN12453, EN12445, EN12978 Operation Diagram tv = Power ON delay Power supply Target present Object present Mute (transmitter ON) Mute function t Output NO v active t Output NC v 2 Specifications are subject to change without notice (06.01.2015)