Photoelectrics Retro-reflective, Relay Output Type PMR Range: 10 m Modulated, infrared light Make or break switching function (switch selectable) LED-indication for target detected Multi supply voltage: 12 to 240 VDC and 24 to 240 VAC, 50/60 Hz 25 x 65 x 81 mm reinforced PC housing, IP 67 Timer options (adjustable) NO and NC output Product De scrip tion Ordering Key PMR10R G T Retro-reflective pho to e lec tric plastic hous ing. PG 13.5 or Type switch. Range up to 10 m. 1/2 NPT cable gland. Timer PG 13.5 cable gland Fixed sensitivity. Immune to options: De lay on oper ate, Option: Timer function ambi ent light. Output func tion delay on release, one shot switch selectable. Pro tec tion (triggered on lead ing or trail - degree IP 67. Screw termi nal ing edge). connection. 25 x 65 x 81 mm Type Selection Housing Range Ordering no. Ordering no. W x H x D S without timer with timer n 25 x 65 x 81 PG 13.5 cable gland 10 m PMR 10R G PMR 10R GT 1/2 NPT cable gland 10 m PMR 10R I PMR 10R IT Specifications Rated operating dist. (S ) PMR10.. 10 m Light spot size 280 mm at 4 m n (0 to 5,000 lux) with reflector type ER 4, Operating frequency (f) 20 Hz ref. target Response time Rated operational volt. (U ) 10.8 to 264 VDC B OFF-ON (t) 20 ms ON (AC: 45 to 65 Hz) 21.6 to 264 VAC ON-OFF (t) 30 ms OFF Rated operational power Power ON delay (t ) 300 ms (typ. 100 ms) v (Relay ON) 1.5 W (2.0 VA) Output function Switch selectable, make or Output break switching Contact ratings (AgCdO) (micro gap) Indication Resistive loads AC 1 3 A/250 VAC Target detected LED, yellow DC 1 3 A/30 VDC Optional timer Small inductive loads AC 15 2 A/250 VAC Delay on operate 0.1 to 7 s 2 s DC 13 3 A/30 VDC 6 Delay on release 0.1 to 7 s 2 s Mechanical life 40 x 10 operations 5 One shot 0.1 to 7 s 2 s Electrical life 5 x 10 operations at 220 VAC - 3 A resistive Environment load: 360 impulses/h Overvoltage category III (IEC 60664/60664A 60947-1) Dielectric voltage 2000 VAC rms (cont./supply) Pollution degree 3 (IEC 60664/60664A Sensitivity Fixed 60947-1) Light source GaAlAs, LED, 880 nm Degree of protection IP 67 (IEC 60529 60947-1) Light type Infra red, modulated Temperature Optical angle 2 Operating -25 to +55C (-13 to +131F) Storage -30 to +80C (-22 to +176F) Specifications are subject to change without notice (02.03.2006) 1 PMR Specifications (cont.) Selection of Function Vibration 10 to 150 Hz, 0.5 mm/7.5 g Switch (IEC 60068-2-6) 1 2 3 PMR 10R . 1 Break switching Shock 2 x 1 m & 100 x 0.5 m (IEC 60068-2-32) 2 Make switching Rated insulation voltage 250 VAC (rms) Housing material Body PC, grey 3 Delay on operate - PMR 10R .T Front PC, black Break switching Cover PC, black 4 Delay on operate - Cable gland PA, black, reinforced Make switching Mounting bracket Steel, black Connection 5 Delay on release - 2 Screw terminal 5 x 2 x 1 mm Break switching Cable gland PG 13.5 or 1/2 NPT 6 Delay on release - for cable 6 to 10 mm Make switching Weight 110 g 7 One shot, trailing edge - Approvals UL, CSA Break switching CE-marking Yes 8 One shot, trailing edge - Make switching 9 One shot, leading edge - Break switching Connection Diagram 10 One shot, leading edge - Time adjustment Make switching (optional) Dont care Upper postion ON (Mode 1) Lower position OFF (Mode 0) LED DIP switches 12 - 240 VDC 24 - 240 VAC Truth Table 50/60 Hz Make switching Break switching 30 VDC Object present Yes No Yes No 250 VAC Max. 3 A LED OFF ON OFF ON Load Non- Active Active Non- active active Installation Hints To avoid interference from inductive voltage/ Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables Incorrect Correct The cable should not be pulled A proximity switch should not serve as Any repetitive flexing of the mechanical stop cable should be avoided 2 Specifications are subject to change without notice (02.03.2006)