Solid State Relays PCB, 1-Phase ZS Types RAP 40 A ., RAP 48 A . AC Solid State Relay for PCB mounting Zero switching Rated operational current: 3 or 5 AACrms Blocking voltage: Up to 1200 V p Rated operational voltage: Up to 480 VACrms Input range: 3.5 to 40 VDC 4.5 to 40 VDC Isolation: OPTO (input-output) 4000 VACrms LED status indication Low off-state leakage current High surge ratings Product Description Ordering Key RAP 48 A 5 Solid State Relay (PCB) The RAP-series from Carlo sheet, e.g. max. current, ambi- Switching mode Gavazzi is a Solid State Relay ent temperature etc. Mounting type family for socket- or PCB- Rated operational voltage mounting. With built-in LED The use of optotriacs for gal- Housing type status indication for control vanic separation together with Rated operational current input, the relay is an ideal in- alternistors as output devices terface between PLCs or give the most advanced per- other logic controls and load. formance. Additional snubbers The housing design and pack- are no longer necessary. The ing allows automatic insertion zero switching relay also works and soldering. with inductive loads due to its high surge capability. An inter- The relay has been designed nal heatsink optimizes the to switch inductive or resistive thermal resistance between loads as long as enough chip and ambient air, thereby attention is paid to the speci- increasing the lifetime of the fications stated in this data relay. Type Selection Switching mode Rated operational voltage Rated operational current Control voltage A: Zero switching 40: 400 VACrms 3: 3 AACrms 3.5 to 40 VDC 48: 480 VACrms 5: 5 AACrms 4.5 to 40 VDC Selection Guide Rated operational Control voltage Rated operational current voltage 3 AACrms 5 AACrms 400 VACrms 3.5 to 40 VDC RAP 40 A 3 RAP 40 A 5 480 VACrms 4.5 to 40 VDC RAP 48 A 3 RAP 48 A 5 General Specifications RAP 40 A . RAP 48 A . Operational voltage range 10 to 440 VACrms 20 to 530 VACrms Blocking voltage 1000 V 1200 V p p Zero voltage turn-on 20 V 40 V Operational frequency range 45 to 65 Hz 45 to 65 Hz Power factor 0.2 0.2 Approvals UL, CSA, VDE UL, CSA, VDE CE-marking Yes Yes Specifications are subject to change without notice (28.02.2007) < >RAP Input Specifications RAP 40 A . RAP 48 A . Control voltage range 3.5 to 40 VDC 4.5 to 40 VDC Pick-up voltage 3.5 VDC 4.5 VDC Drop-out voltage 1 VDC 2 VDC Reverse voltage 6 VDC 6 VDC Response time pick-up 1/2 cycle 1/2 cycle Response time drop-out 1/2 cycle 1/2 cycle Input current (through current limiter) 12 mA 12 mA Output Specifications RAP 4.. A 3 RAP 4.. A 5 Rated operational current AC 51 3 AACrms 5 AACrms AC 53a 2.5 AACrms 3 AACrms Minimum operational current 20 mAACrms 20 mAACrms Rep. overload current t=1 s 6 AACrms 12 AACrms Non-rep. surge current t=20 ms 60 A 90 A p p Off-state leakage current rated voltage and frequency 1 mAACrms 1 mAACrms 2 2 2 I t for fusing t= 10 ms 18 A s 40 A s On-state voltage drop rated current 1.2 VACrms 1.2 VACrms Critical dV/dt off-state 100 V/s 100 V/s Thermal Specifications RAP .. A 3 RAP .. A 5 Operating temperature -20 to +70C (-4 to +158F) -20 to +70C (-4 to +158F) Storage temperature -40 to +100C (-40 to +212F) -40 to +100C (-40 to +212F) Junction temperature 125C (257F) 125C (257F) R junction to case 20.5 K/W 15.6 K/W th R junction to ambient 33 K/W 21 K/W th Insulation Input - Output Rated isolation voltage 4000 VACrms 10 Insulation resistance 10 Insulation capacitance 8 pF Reference voltage according to VDE 01 10 B Insulation group C 500 VACrms, 600 VDC < > Specifications are subject to change without notice (28.02.2007)