Solid State Motor Contactor 3 Phase Motor Reversing Types REC2R AC electronic motor Reversing Relay Instantaneous Switching Three phase with two pole switching Control status LED indication Two control input ranges: 24 VAC/DC, 90-253 VAC Motor rating up to 3kW (3.0 HP) Rated Operational Voltage up to 600 VAC Opto-isolation at 4kVrms Mechanical Contactor resemblance with covered heatsink DIN-rail and panel mounting Product Description Ordering Key REC 2 R 48 A 2 0 G K E REC2R is a 3-phase electronic prevents short circuit between Electronic Contactor motor reversing relay. L1-T1 phases in case a control signal Number of switched poles and L3-T3 poles are switched is applied for forward and Switching mode while L2, T2 pole is a direct reverse directions simultane- Rated Operational Voltage connection from L2 phase to ously through the pluggable Control voltage the motor. A front dual colour connector on the front. In such Motor Power rating LED, lights green when the a case REC switches off until High ITSM option motor is running in the forward one of the control signals is Connection type for control direction upon application of removed. Connection type for power control voltage to A2-A3 termi- Connection configuration nals. REC can control motors up to 7.6 AAC and goes up to 600 Motor runs in the reverse VAC rating. An adaptor for direction when control voltage underlying overload modules is applied to terminals A1- A2 is available. Specifications are and the LED lights red. The stated at 25C unless speci- integrated electronic interlock fied. Ordering Key Switching Switching Rated operational Control voltage Motor Itsm Connection Connection Configuration poles mode voltage power rating control control power REC2: 2 poles R: Reversing 48: 48-530 VAC D: 24 VDC, 2: 2.2kW 0: Standard G: Clamp K: Screws E: Contactor -15%, + 20% 3: 3.0kW Itsm R: Spring* 60: 48-600 VAC A: 90 - 253 VAC * Available on request Selection Guide Rated Voltage No of Poles Control voltage Power Rating 400 VAC 2.2kW 3.0kW 48-530 VAC 2 24VDC REC2R48D20GKE REC2R48D30GKE 90-253VAC REC2R48A20GKE REC2R48A30GKE 48-600 VAC 2 24VDC - REC2R60D30GKE 90-253VAC - REC2R60A30GKE * According to EN61131-2 Specifications are subject to change without notice (10.11.2011) 1REC2R General Specifications REC..48.. REC..60.. Rated Operational voltage 480 VAC 600 VAC Operational voltage Range 48-530 VAC 48-600 VAC Blocking voltage 1200 Vp 1600 Vp Operational frequency range 45 - 65 Hz 45 - 65 Hz Power factor >0.5 rated voltage >0.5 rated voltage Control specifications REC...D.. REC...A.. Rated control input voltage 24 VDC 230 VAC Control voltage range 15-32 VDC 90 - 253 VAC (according to EN61131-2) Maximum Input current 10 mA 15 mA Pick-up voltage 15 VDC 90 VAC Maximum Reverse voltage 32 VDC N/A Drop-out voltage 1 VDC 10 VAC Response time pick-up 5 ms 30 ms Response time drop-out 15 ms 30 ms Operational frequency range N/A 45 - 65 Hz Maximum Time delay F- -> R, F <-- R 80 ms 100 ms LEDs Forward: Green Forward: Green Reverse: Red Reverse: Red Connection Specifications POWER CONNECTIONS (75C,Copper Cables) CONTROL CONNECTIONS (75C,Copper Cables) Connection Type Screw terminal Connection Type Spring loaded* Captive Clamp Illustration of terminal Illustration of terminal Rigid (Solid) 2 x 1.5..2.5mm (2 x AWG16..14) Type Pluggable Pluggable 2 x 2.5..6mm (2 x AWG14..10) Stranded - 1 x 0.05..1.5mm Finely stranded with ( 1 x AWG30..16) end sleeve 2 x 1..2.5mm (2 x AWG17..14) Solid 1 x 0.05..2.5mm 1 x 0.05..2.5mm 2 x 2.5..6mm (2 x AWG14..10) ( 1 x AWG 24..14) (1 x AWG30..14) 1 x 10mm (1 x AWG8) Stripping length 10mm 6 - 7.5mm Flexible Tightening torque N/A 0.5Nm w/o end sleeves 2 x 1.5..2.5mm (2 x AWG16..14) (Philips bit) 2 x 2.5..6mm (2 x AWG14..10) Screw Size N/A M3 Stripping length 10mm Withdrawal Force 1.5N 1.5N Tightening torque 2Nm (Pozidriv 2 bit) Insertion Force 3N 3N Screw size M4 Max Contact Aperture for Resistance 15m 15m termination lug (fork type) Max 11mm * Available on request 2 Specifications are subject to change without notice (10.11.2011)