RGS1D1000D15KKE Carlo Gavazzi

Solid State Relays DC Switching Types RGC1D Solid State Contactor RGS1D Solid State Relay IGBT power semiconductor 17.5 mm product width, with or without integrated heatsink Rated Operational voltage: 1000 VDC Rated Operational current: Up to 25 ADC Control voltage: 4.5-32 VDC Input polarity protection Removable IP20 cover Integrated free-wheeling diode for output protection Max. transient peak voltage: 1200 V * RGS1D RGC1D Product Description Ordering Key RGC 1 D 1000 D 15 K K E This product series is mainly the IGBT at the output is pro- Solid State Relay intended to switch a string of tected against back voltage Number of poles photovoltaic panels with a with an integrated free- Switching mode maximum string voltage of wheeling diode. Rated operational voltage 1000 VDC and up to 25 ADC Control voltage in only 17.5 mm width. It may RGS1D is the panel mount Rated operational current be used in other DC applica- version while the RGC1D has Connection type for control tion as well. an integrated heatsink. Connection type for power Connection configuration The control port is protected Specifications are stated at Options against reverse polarity while 25C unless otherwise noted. Ordering Key 1-Phase Rated Voltage Control Voltage Rated Connection Connection Connection DC switching Current Control Power Configuration RGC1D: Contactor 1000: D: 4.5 - 32 VDC 15: 15 ADC K: Screw K: Screw E: Contactor RGS1D: SSR 1000 VDC 25: 25 ADC Selection Guide (Integrated heatsink) Rated Output Max. transient Control Voltage Rated Operational Current 40C voltage peak voltage 15 ADC 1000 VDC 1200 Vp 4.5 - 32 VDC RGC1D1000D15KKE Selection Guide (Panel-mount Solid State Relay) Rated Output Max. transient Control Voltage Rated Operational Current voltage peak voltage 15 ADC 25 ADC 1000 VDC 1200 Vp 4.5 - 32 VDC RGS1D1000D15KKE RGS1D1000D25KKE 1 RGS1D1000D25KKEHT 1: Option with attached thermal pad. General Specifications Output Voltage Specifications Protection IP20 Operational Voltage Range 2 IEC 24 - 1000 VDC Control input status continuously ON Green LED, 2 when control input is applied UL508 24 - 600 VDC Pollution degree 2 Maximum transient (non-conductive pollution with peak voltage 1200 VDC possibilities of condensation) Maximum Onstate Over-voltage category III Voltage Drop 1.6 VDC (fixed installations) 2. -15% on lower voltage limit Isolation Input to Output 4 kVrms Input & Output to Case 4 kVrms * Applicable only for RGC1D1000D15KKE Specifications are subject to change without notice (20.11.2018) 1RG DC o Input Specifications ( 60 C) Control voltage range 4.5 - 32 VDC Maximum response time pick-up Refer to Time 3 characteristics Pick-up voltage 4 VDC Maximum response time drop-out Refer to Time Drop-out voltage 1 VDC characteristics Maximum Reverse voltage 32 VDC Input current See diagram below Note: Ideally control should be switched with a contactless switch (eg: open collector) 3. Pickup voltage should be minimum 6VDC for EMC conformance. 13.7mA 12.9mA 12.1mA 11.3mA 10.5mA 9.7mA 8.9mA 8.1mA 7.3mA 6.5mA 5.7mA 4.9mA 4.1mA 3.3mA 2.5mA 1.7mA 0.9mA 0.1mA 2V 4V 6V 8V 10V 12V 14V 16V 18V 20V 22V 24V 26V 28V 30V 32V Control voltage Time Characteristics TURN-ON TURN-OFF Turn on time (ton) 50s CONTROL CONTROL Turn on delay (tdon) 50s Turn off time (toff) 200s t t (tdoff) 50s Turn off delay Switching Frequency 20Hz SSR SSR OUTPUT OUTPUT t t tdoff toff tdon ton 2 Specifications are subject to change without notice (20.11.2018) Input current