Energy Management Accessories Type SIU TCP 2 Virtual COM port serial device server RS485 (2/4 wires) serial port available Auto detecting 10/100 Mbps Ethernet interface Real COM drivers for Windows Easy-to-use configuration software suite Cigarette pack size Wall and DIN-rail mounting Built-in default key to restore factory default settings Product Description How to order SIU TCP 2 The SIU TCP2 is a gateway sent to the Ethernet (TCP/ Model between Ethernet TCP/IP IP) transparently. With the Power supply adapter and RS485/RS422 serial SIU TCP2 it is possible to communications. Data com- TCP server or as a TCP SIUTCP2 is supplied with communicate with a remote ing from the Ethernet client. Although it connects an utility program (Serial device both in the Intranet (TCP/IP) is sent to the desig- through the virtual link of Manager) providing a simple and Internet environment so nated RS485/RS422 port Ethernet, the port on SIU step-by-step installation allow- the communication dis- and data being received TCP2 is recognised as a real ing to configure the network tance is increased. You can from RS485/RS422 port is COM port by Windows. parameters of SIU TCP2. configure SIU TCP2 as a Supply specification DC supply 9 to 30VDC AC/DC power supply adapter Not Included (see type selection) Power-on indication LED AD5V1A (US): American adapter on request Power consumption 300mA 9V (max) 2,8 Watt max AD5V1A (EU): European adapter on request Input/Output specifications LAN RS485 (2/4-wires) signals Data+, Data-, GND Ethernet 10/100 Mbps Protection 15kV ESD for all signals Connector RJ45 Serial communication parameter Link indication LED Parity None, even, odd, space, mark Off: Ethernet disconnected Data Bits 7, 8 Blinking with green: Data is transmitting on Stop Bits 1, 2 Ethernet for 100Mbps Flow control RTS/CTS, XON/XOFF, Protection Built-in 1.5kV magnetic NONE, DTR/DSR isolation Baud rate 1200bps to 230kbps Ports TCP port 23 (Telnet) Nodes and max distance TCP port 4000 (firmware 1 unit load up to 32 (1000m) updating) Protocols TCP/IP, UDP, SNMP, HTTP, TCP ports 950 and 966 Telnet, ARP, BOOTP, DHCP, (hostbased/driver mode) ICMP UDP port 1029 (broadcast, Windows compatibility Windows, XP, Vista monitor, real COM installer) Serial COM Run LED Red LED Blinking with Orange: Data is transmitting on ON: jumper JP1 pin1 and Ethernet for 10Mbps pin2 are shorted to disable. Connector Male DB9 P firmware running Ready indication LED, green Blinking (rate 0.5sec): P Off: no data is trasmitting firmware is running normal- on COM port, ly. Blinking: data is transmit- ting on COM port. Specifications are subject to change without notice SIUTCP 2 DS 230909 1SIU TCP2 General specifications Operating temperature 0C to +60C (32F to 140F) Housing 5 to 95% RH (non-condens- Dimensions (LxWxH) 65 x 78 x 28mm ing) Material Varnished over iron Storage temperature -20C to +70C (-4F to Protection degree IP30 158F) 20% to 90% RH Weight Approx. 363 g (packing (non-condensing) included) EMC EN61000-6-1 Standard accessories DIN-rail mounting kit Immunity emissions EN61000-6-4 9-pole serial cable Standard compliance Configuration software Safety EN60950 Hardware and software Medical EN55022, class A manuals. Approvals CE Quick installation guide Wiring diagrams Pin Assignment DB9 DB9 Male Female PIN RS232 RS485 (2W) 1 DCD ----- 4-wire SIU TCP 2 RS485 Device 2 TxD ----- 3 RxD Data+ (B) 9 pins Cable wiring 4 DSR Data- (A) 5 GND GND TxD + 2 TxD+ 6 DTR ----- RxD 3 RxD+ 7 CTS ----- GND 5 GND 8 RTS ----- RxD- 7 RxD- 9 ----- ----- TxD- 8 TxD- Note: the table is referred to the SIU TCP2 side of the 9-pole connector. 4-wire RS485 Wiring Fig. 1 DB9 DB9 Male Female 2-wire SIU TCP 2 RS485 Device 9 pins Cable wiring Data+ (B) 3 Data+ (B) Data- (A) 7 Data- (A) GND 5 GND 2-wire RS485 wiring Fig. 2 2 Specifications are subject to change without notice SIUTCP 2 DS 041209