PS9817A-2-F3-AX CEL

PHOTOCOUPLER PS9817A-1,-2 HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) NEPOC Series HIGH-SPEED PHOTOCOUPLER DESCRIPTION The PS9817A-1 and PS9817A-2 are active-low type high-speed photocouplers that use a GaAlAs light-emitting diode on the input side and a photodetector IC that includes a photodiode and a signal processor on the same chip on the output side. The PS9817A-1 and PS9817A-2 are designed specifically for high common mode transient immunity (CMR) and low pulse width distortion. The PS9817A-2 is suitable for high density applications. FEATURES Pulse width distortion ( tPHLtPLH = 35 ns MAX.) High common mode transient immunity (CMH, CML = 15 kV/ s MIN.) PIN CONNECTION 40% reduction of mounting area (5-pin SOP 2) (Top View) High-speed (10 Mbps) PS9817A-1 High isolation voltage (BV = 2 500 Vr.m.s.) 8 765 1. NC Open collector output 2. Anode 3. Cathode Ordering number of tape product : PS9817A-1-F3: 1 500 pcs/reel 4. NC : PS9817A-2-F3: 1 500 pcs/reel 5. GND 6. VO Pb-Free product 7. NC Safety standards 8. VCC 1 234 UL approved: File No. E72422 PS9817A-2 DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008347 (Option) 8 765 1. Anode1 2. Cathode1 APPLICATIONS 3. Cathode2 Measurement equipment 4. Anode2 5. GND PDP 6. VO2 FA Network 7. VO1 8. VCC 1 234 TRUTH TABLE LED Output ON L OFF H Document No. PN10647EJ03V0DS (3rd edition) Date Published August 2008 NS The mark <R> shows major revised points. The revised points can be easily searched by copying an<R in the PDF file and specifying it in theFind what field. SHIELD SHIELDPS9817A-1,-2 PACKAGE DIMENSIONS (UNIT: mm) 5.210.25 85 6.00.2 14 3.950.1 0.50.3 1.27 +0.10 0.10 S 0.25 M 0.40.05 2 Data Sheet PN10647EJ03V0DS 3.270.2 0.10.1 +0.10 0.15 0.05