BIPOLAR ANALOG INTEGRATED CIRCUIT UPC2776TB 5 V, SUPER MINIMOLD SILICON RFIC WIDEBAND AMPLIFIER GAIN vs. FREQUENCY FEATURES 30 WIDE FREQUENCY RESPONSE: 2.7 GHz FLAT GAIN RESPONSE: 1.0 dB 25 HIGH GAIN: 23 dB MEDIUM OUTPUT POWER: P1dB: 6.0 dBm at 1.0 GHz 5 V SINGLE SUPPLY VOLTAGE 20 SMALL SURFACE MOUNT PACKAGE: SOT-363 AVAILABLE ON TAPE AND REEL 15 DESCRIPTION 10 The UPC2776TB is a Silicon Monolithic integrated circuit 0 0.5 1.0 1.5 2.0 2.5 3.0 which is manufactured using the NESATIII process. This Frequency, f (GHz) device is suitable for wide band IF blocks due to its high gain and flat response. The UPC2776TB is pin compatible and has comparable performance as the larger UPC2776T, so it TEST CIRCUIT VCC is suitable for use as a replacement to help reduce system size. The IC is housed in a 6 pin super minimold or SOT-363 1000 pF package. The UPC2776TB is designed as a low cost IC gain stage in DBS, TVRO, PCS, WLAN and other communication L = 1000 nH receivers. 6 C1 C2 50 50 4 1 OUT IN 1000 pF 1000 pF 2, 3, 5 (VCC = 5.0 V, TA = 25C, ZL = ZS = 50 ) ELECTRICAL CHARACTERISTICS PART NUMBER UPC2776TB PACKAGE OUTLINE S06 SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX ICC Circuit Current (no signal) mA 18 25 33 GS Small Signal Gain, f = 1 GHz dB 21 23 26 fU Upper Limit Operating Frequency (The gain at fu is 3 dB down from the gain at 0.1 GHz) GHz 2.3 2.7 GS Gain Flatness, f = 0.1 to 2.0 GHz dB 1.0 P1dB Output Power at 1 dB Compression, f = 1 GHz dBm +4 +6.0 NF Noise Figure, f = 1 GHz dB 6.0 7.5 RLIN Input Return Loss, f = 1 GHz dB 4.5 7.5 RLOUT Output Return Loss, f = 1 GHz dB 15 20 ISOL Isolation, f = 1 GHz dB 27 32 PSAT Saturated Output Power, f = 1 GHz dBm 8.5 IM3 3rd Order Intermodulation Distortion, f = 1 GHz dBc -30 PO = 0 dBm each tone, f1 = 1000 MHz, f2 = 1002 MHz The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Date Published: June 28, 2005 DISCONTINUED Gain, GS (dB)UPC2776TB 1 RECOMMENDED OPERATING CONDITIONS ABSOLUTE MAXIMUM RATINGS (TA = 25C) SYMBOLS PARAMETERS UNITS MIN TYP MAX SYMBOLS PARAMETERS UNITS RATINGS VCC Supply Voltage V 4.5 5.0 5.5 VCC Supply Voltage V 6 ICC Total Circuit Current mA 60 PIN Input Power dBm +10 ORDERING INFORMATION (Solder Contains Lead) 2 PT Total Power Dissipation mW 200 PART NUMBER QTY TOP Operating Temperature C -40 to +85 UPC2776TB-E3 3K/Reel TSTG Storage Temperature C -55 to +150 Note: Notes: Embossed Tape, 8 mm wide. Pins 1, 2 and 3 face perforated side 1. Operation in excess of any one of these parameters may result of tape. in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = 85C). ORDERING INFORMATION (Pb-Free) PART NUMBER QTY UPC2776TB-E3-A 3K/Reel Note: Embossed Tape, 8 mm wide. Pins 1, 2 and 3 face perforated side of tape. TYPICAL PERFORMANCE CURVES (TA = 25C) CURRENT vs. VOLTAGE CURRENT vs. TEMPERATURE 40 40 VCC = 5.0 V No Signals 35 35 30 30 25 25 20 20 15 15 10 10 5 5 0 0 0123456 -60 -40 -20 0 +20 +40 +60 +80 +100 Supply Voltage, VCC (V) Temperature, TA (C) NOISE FIGURE AND GAIN vs. GAIN vs. FREQUENCY and VOLTAGE FREQUENCY and TEMPERATURE 9 25 30 GP VCC = 5.0 V VCC = 5.5 V VCC = 5.0 V TA = 25C TA = -40C 8 20 25 VCC = 4.5 V TA = +85C 7 15 20 VCC = 5.5 V NF VCC = 5.0 V 6 10 15 VCC = 4.5 V 5 5 10 0.1 0.3 1.0 3.0 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) DISCONTINUED Noise Figure, NF (dB) Current, ICC (mA) Gain, GP (dB) Current, ICC (mA) Gain, GP (dB)