S/SGT8859200/A/03/01/2018 cel3pac page 1 / 6 GB/F Three phase power solid state relay Relais statique triphas de puissance SGT8859200 Output / Sortie : 24-640VAC (10%) Zero Cross Solid State Relay specially designed for most types of loads. Input / Entre : 90-280VAC/DC Over-Voltage protection on output (VDR). 50A / 1600Vpeak Thyristors. Back to back thyristors on output with TMS technology for a long lifetime expectancy, RoHS void free process. It=2800 As. 42A AC51 (Resistive / Rsistif). Direct copper bonding (DCB) technology. 12A AC53 (Motor / Moteur). Green LED visualization on the input 90-280VAC/DC. Designed in conformity with IEC/ EN60947-4-3 and IEC/ EN60947-4-2 Built in IP20 - protection with flaps Relais statique synchrone spcialement adapt la plupart des charges. Protection en tension sur la sortie (VDR). Sorties thyristors technologie TMS permettant une longue dure de vie, procd soudure RoHS sans vods. Technologie DCB (Direct Copper Bonding). Entre 90-280VAC/DC avec DEL verte de visualisation. Construit en conformit la norme IEC/EN60947-4-3 et IEC/EN60947-4-2 Protection contre le toucher IP20 avec volets de protection. Typical application / Application typique: Synoptic / Synoptique: L1 L2 L3 Protection equipment / Organe de protection 1/L1 8/A1 ~ ~ 1/L1 3/L2 5/L3 2/T1 3/L2 7/A2 2/T1 4/T2 6/T3 8/A1 7/A2 4/T2 5/L3 Supply 90-280VAC/DC / ( ) Supply 90-280VAC/DC 6/T3 ( ) Motor DoCr r seuspisptilvye / l oad / ChargAeli mmeontetautri oonu DrCsistive Proud to serve you All technical caracteristics are subject to change without previous notice. Caractristiques sujettes modifications sans pravis. r e l a i s INSULATION INSULATION INSULATION S/SGT8859200/A/03/01/2018 cel3pac page 2 / 6 GB/F Control characteristics (at 25C) / Caractristiques de commande ( 25C) DC Parameter / Paramtre Symbol Min Nom Max Unit Control voltage / Tension de commande Uc 90 280 V Control current ( Uc ) / Courant de commande Ic <7 mA Release voltage / Tension de relachement Uc off 2 V Input internal resistor / Rsistance interne Rc current regulator Ic=f(Uc) / Ic=f(Uc) Output characteristics (at 25C) / Caractristiques de sortie (25C) Parameter per leg / Paramtre par voie Conditions Symbol Min Typ. Max Unit Operating voltage range / Plage de tension d utilisation Ue 24 400 640 V rms Peak voltage / Tension crte Up 1600 V Zero cross level / Niveau de synchronisme Usync 10 V Latching voltage / Tension minimum amorage Ie nom Ua 10 V (1) Nominal current / Courant nominal 40C (AC-51) Ie AC-51 42 A rms (1) Ie AC-53 12 A rms Nominal current / Courant nominal 40C (AC-53) Non repetitive overload current / Courant de surcharge tp=20ms Itsm 700 750 A On state voltage drop / Chute directe l tat passant 25C Vt 1 V On state dynamic resistance / Rsistance dynamique rt 7,5 m Output power dissipation (max value) / Puissance dissipe Pd 0,9x1xIe + 0,0075 x Ie W (max) Thermal resistance between junction to case (one leg) Rthj/c 0,45 K/W Rsistance thermique jonction/semelle (1 voie) Off state leakage current / Courant de fuite l tat bloqu Ue typ, 50Hz Ilk 1 mA Minimum load current / Courant minimum de charge Iemin 5 mA Turn on time / Temps de fermeture (cycles) ton max 0,5 Turn off time / Temps d ouverture (cycles) toff max 0,5 Operating frequency range / Frquence utilisation F mains f 0,1 50-60 400 Hz Off state dv/dt / dv/dt l tat bloqu dv/dt 500 V/s Maximum di/dt non repetitive / di/dt max non rptitif di/dt 50 A/s 2 2 I2t (<10ms) I t 2450 2800 A s Conducted immunity level / Immunit conduite IEC/EN61000-4-4 (bursts) 4kV criterion A Conducted immunity level / Immunit conduite IEC/EN61000-4-5 (surge) 4kV criterion A Fuse MERSEN type gRC Short circuit protection / Protection court-circuit ( 100kA) type 2 coordination Example (1) : with heatsink see fig 1. / Avec dissipateur voir fig1. 8 celduc www.celduc.com r e l a i s 5, Rue Ampre BP30004 42290 SORBIERS - FRANCE E-mail : celduc-relais celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tl. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tl. +33 (0) 4 77 53 90 19