S/MOD/SKA20421/C/07/06/2013 page 1 / 4F/GB Relais statique pour circuit imprim AC Solid State Relay for PCB mounting SKA20421 Relais statique asynchrone pour circuit imprim Output : 12-275VAC Random State Relay for printed circuit board 5A (4A UL/VDE) Input : 3-30VDC Protection en tension sur la sortie (VDR) pour une trs haute immunit aux perturbations selon IEC/EN61000-4-4 & IEC/EN61000-4-5. Over-Voltage protection on output (VDR) to have a high immunity according IEC/EN61000-4-4 & IEC/EN61000-4-5 Trs faible niveau de synchronisme / Very low zero cross voltage. Trs faible courant de fuite / Very low leakage current. Fort courant de surcharge avec un calibre de courant non permanent de 10A / High surge current with a nominal power component of 10A (non permanent) Construit en conformit aux normes IEC/EN60947-4-3 et EN60950/VDE0805 IEC 60335-1/ VDE0700-1 UL-cUL Designed in conformity with IEC/ EN60947-4-3 and EN60950/VDE0805 IEC 60335-1/ VDE0700-1 UL-cUL FILE Nr. E69913 REG.-Nr.10133 Dimensions CAD documents: www.celduc-relais.com/uk/plan3d.asp PPrroouudd ttoo sseerrvvee yyoouu PPrroouudd ttoo sseerrvvee yyoouu celduc All technical caracteristics are subject to change without previous notice. Caractristiques sujettes modifications sans pravis. r e l a i sS/MOD/SKA20421/C/07/06/2013 page 2 / 4F/GB Caractristiques d entre / Control characteristics (at 25C) Input : Ic = f( Uc) DC Paramtre / Parameter Symbol Min Typ Max Unit Tension de commande / Control voltage Uc 3 5-12-24 30 V Courant de commande / Control current ( Uc ) Ic 2 29 mA Tension de non fonctionnement / Release voltage Uc off 0.8 V Rsistance interne / Input internal resistance Rc 1000 Immunit / Input immunity : EN61000-4-4 2kV Immunit / Input immunity : EN61000-4-5 2KV Caractristiques de sortie / Output characteristics (at 25C) Paramtre / Parameter Conditions Symbol Min Typ. Max Unit Plage de tension utilisation / Operating voltage range Ue 12 230 275 V rms Tension de crte / Peak voltage ( clamping voltage) Up 600 (450) V Niveau de synchronisme / Zero cross level Usync RANDOM V Tension minimum amorage / Latching voltage Ie nom Ua 10 V Courant nominal / nominal current (AC-51) Heater Ie AC-51 4 5 A rms Courant nominal / nominal current (AC-53) Motor Ie AC-53 1.5 A rms Courant nominal / nominal current (other loads) Other loads Ie See page 3 Courant surcharge / Non repetitive overload current tp=10ms (Fig. 3) Itsm 105 120 A Chute directe l tat passant / On state voltage drop (Ie = nominal current) V 0.85 + 0,040xIe V Tension seuil l tat passant /On state Threshold voltage 25C Vto 0.85 V Rsistance dynamique / On state dynamic resistance rt 40 m Puissance dissipe (max) / 2 Pd W 0,765xIe + 0,040xIe Output power dissipation (max value) Rsistance thermique jonction/air ( depending on installation) Rthj/a 21 24 33 K/W Thermal resistance between junction to air Courant de fuite l tat bloqu / Off state leakage current Ue typ, 50Hz Ilk 0.1 mA Courant minimum de charge / Minimum load current Iemin 1 mA Temps de fermeture / Turn on time Ue typ, 50Hz ton max 0.1 ms Temps d ouverture / Turn off time Ue typ, 50Hz toff max 10 ms Frquence rseau/ Mains frequency range F mains f 0,1 50-60 800 Hz dv/dt l tat bloqu / Off state dv/dt dv/dt 500 V/s di/dt max / Maximum di/dt non repetitive di/dt 50 A/s 2 2 I2t (<10ms) : Value for fusing 55 72 I t A s Immunit / Conducted immunity level IEC/EN61000-4-4 (bursts) 2kV criterion A Immunit / Conducted immunity level IEC/EN61000-4-5 (surge) 2kV criterion A Caractristiques gnrales / General characteristics (at 25C) Isolement entre/sortie - Input to output insulation Ui 4000 VRMS Rsistance Isolement / Insulation resistance Ri 1000 ( 500VDC) M Tenue aux tensions de chocs / Rated impulse voltage Uimp 4000 V Degr de protection / Protection level / CEI529 IP20 Degr de pollution / Pollution degree - 1 Vibrations / Vibration withstand 10 -150 Hz according to IEC 60068-2-6 sine test 10 g Tenue aux chocs / Shocks withstand according to IEC 60068-2-27 11ms > 30 .... 50 g Temprature de fonctionnement /Ambient temperature (no icing, no condensation) - -40/+100 C Temprature de stockage/ Storage temperature (no icing, no condensation) -40/+125 C Humidit relative / Ambient humidity HR 40 to 85 % Poids/ Weight 20 g Conformit CE / CE Conformity IEC/ EN60947-4-3 Conformit USA / US Conformity UL/cUL Conformit normes ferroviaires/ Conformity to railways applications yes (consult us) Plastique du boitier / Housing Material PA 6 UL94VO Temperature max de soudure terminaux / max soldering terminals temperature 300C/5s 260C/10 s celduc www.celduc.com r e l a i s 5, Rue Ampre BP30004 42290 SORBIERS - FRANCE E-mail : celduc-relais celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tl. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tl. +33 (0) 4 77 53 90 19