Protection S/MON/SO842974/D/29/07/2013 okpac page 1 / 6F/GB Relais statique monophas de puissance Single phase Power Solid State Relay SO842974 Relais statique synchrone spcialement adapt la plupart des charges. Output : 12-275VAC 25A Zero Cross Solid State Relay designed for most types of loads. Input : 20-265VAC/DC Sortie 12 275VAC 25A. Output 12 to 275VAC 25A. Protection en tension sur la sortie (VDR) pour une trs haute immunit aux perturbations selon IEC/EN61000-4-4 & IEC/EN61000-4-5. Over-Voltage protection on output (VDR) to have a high immunityaccording IEC/EN61000-4-4 & IEC/EN61000-4-5 Trs faible niveau de synchronisme Very low zero cross voltage. Large plage de contrle: 20 - 265VAC/DC avec un courant de commande rgul. LED de visualisation sur l entre de couleur verte. Large control range: 20 - 265VAC/DC with input current limiter. Green LED visualization on the input. Protection IP20 par volets amovibles sur les bornes. Etiquette repre disponible en option. IP20 protection by removable flaps on terminals with optional labels. Construit en conformit aux normes IEC/EN60947-4-3 FILE Nr. E69913 et EN60950/VDE0805 IEC 60335-1/ VDE0700-1 UL-cUL Designed in conformity with IEC/ EN60947-4-3 and EN60950/VDE0805 IEC 60335-1/ VDE0700-1 UL-cUL REG.-Nr.10102 Avec tiquette de reprage en option With optional labels Dimensions Secteur AC / AC Mains 1/L1 et 2/T2 peuvent tre inverss 1/L1 and 2/T1 can be swapped Optional labels AC or DC control 1/L1 2/T1 4/A2 LED 3/A1 Le relais doit tre mont sur dissipateur thermique. Charge / Load SSR must be mounted on heatsink CAD documents: www.celduc-relais.com/uk/plan3d.asp PPrroouudd ttoo sseerrvvee yyoouu PPrroouudd ttoo sseerrvvee yyoouu celduc All technical caracteristics are subject to change without previous notice. Caractristiques sujettes modifications sans pravis. r e l a i s S/MON/SO842974/D/29/07/2013 okpac page 2 / 6F/GB Caractristiques d entre / Control characteristics (at 25C) AC/DC Paramtre / Parameter Symbol Min Typ Max Unit Tension de commande / Control voltage AC Uc 20 110-230 265 VAC Tension de commande / Control voltage DC Uc 18 24-48-110 240 VDC Courant de commande / Control current ( Uc ) Ic 5 10 mA Tension de non fonctionnement / Release voltage Uc off 5 V LED d entre / Input LED verte / green Immunit / Input immunity : EN61000-4-4 2kV Immunit / Input immunity : EN61000-4-5 2KV Caractristiques de sortie / Output characteristics (at 25C) Paramtre / Parameter Conditions Symbol Min Typ. Max Unit Plage de tension utilisation / Operating voltage range Ue 12 230 275 V rms Tension de crte / Peak voltage ( clamping voltage) Up 600 (450) V Niveau de synchronisme / Zero cross level Usync 12 V Tension minimum amorage / Latching voltage Ie nom Ua 10 V Courant nominal / nominal current (AC-51) Heater Ie AC-51 25 25 A rms Courant nominal / nominal current (AC-53) Motor Ie AC-53 3.5 5 A rms Courant nominal / nominal current (other loads) Other loads Ie See page 5 Courant surcharge / Non repetitive overload current tp=10ms (Fig. 3) Itsm 250 340 A Chute directe l tat passant / On state voltage drop (Ie = nominal current) V 0.85 + 0,016xIe V Tension seuil l tat passant /On state Threshold voltage 25C Vto 0.85 V Rsistance dynamique / On state dynamic resistance rt 16 m Puissance dissipe (max) / 2 Pd W 0.765xIe + 0,0016xIe Output power dissipation (max value) Rsistance thermique jonction/semelle Rthj/c 1.1 K/W Thermal resistance between junction to case Courant de fuite l tat bloqu / Off state leakage current Ue typ, 50Hz Ilk 1mA Courant minimum de charge / Minimum load current Iemin 5 mA Temps de fermeture / Turn on time Ue typ, 50Hz ton max 30 ms Temps d ouverture / Turn off time Ue typ, 50Hz toff max 30 ms Frquence rseau/ Mains frequency range F mains f 0,1 50-60 800 Hz dv/dt l tat bloqu / Off state dv/dt dv/dt 500 V/s di/dt max / Maximum di/dt non repetitive di/dt 50 A/s 2 2 I2t (<10ms) : Value for fusing 340 600 I t A s Immunit / Conducted immunity level IEC/EN61000-4-4 (bursts) 2kV criterion A Immunit / Conducted immunity level IEC/EN61000-4-5 (surge) 2kV criterion A Protection court-circuit / Short circuit protection coordination typ 2 see page 5 Fuse Ferraz gRC 25A 14x51 Caractristiques gnrales / General characteristics (at 25C) Isolement entre/sortie - Input to output insulation Ui 4000 VRMS Isolation sortie/ semelle - Output to case insulation Ui 4000 VRMS Rsistance Isolement / Insulation resistance Ri 1000 ( 500VDC) M Tenue aux tensions de chocs / Rated impulse voltage Uimp 4000 V Degr de protection / Protection level / CEI529 IP20 Degr de pollution / Pollution degree - 2 Vibrations / Vibration withstand 10 -150 Hz according to IEC 60068-2-6 sine test 10 g Tenue aux chocs / Shocks withstand according to IEC 60068-2-27 11ms > 30 .... 50 g Temprature de fonctionnement /Ambient temperature (no icing, no condensation) - -55 /+100 C Temprature de stockage/ Storage temperature (no icing, no condensation) -55/+125 C Humidit relative / Ambient humidity HR 40 to 85 % Poids/ Weight 80 g Conformit CE / CE Conformity IEC/ EN60947-4-3 Conformit USA / US Conformity UL/cUL Conformit normes ferroviaires/ Conformity to railways applications yes (consult us) Plastique du boitier / Housing Material PA 6 UL94VO Semelle / Base plate Aluminium, Tinned-plated celduc www.celduc.com r e l a i s 5, Rue Ampre BP30004 42290 SORBIERS - FRANCE E-mail : celduc-relais celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tl. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tl. +33 (0) 4 77 53 90 19