S/MON/SUL865070/A/10/07/2008 page 1 / 7F/GB celpac PRELIMINARY SUL865070 Output : 24-510VAC 32A(*) Contacteur statique monophas de puissance Input : 3.5-32VDC Power Solid State Contactor Install it & Forget it Contacteur statique largeur 22,5mm prt l emploi synchrone adapt la plupart des charges 22,5mm Solid State Contactor for space-saving design. Ready to use with its heatsink Zero Cross Solid State Contactor specially designed for most of loads. Sortie 24 510VAC calibre 50A (voir courbe en fonction de la temprature) Power output 24 to 510VAC 50A rating (see derating curve) Large plage de contrle: 3,5 - 32VDC avec un courant de commande rgul. LED de visualisation sur l entre de couleur jaune. Protection aux surtensions sur l entre intgre. Large control range: 3.5 -32VDC with input current limiter. Yellow LED visualization on the input. Input over-voltage protection. Haute Immunit et Protection de la tension de sortie par varistor. High Immunity and output voltage protection by VDR Protection IP20 avec volets amovibles IP20 protection with flaps Construit en conformit aux normes EN60947-4-3 (IEC947-4-3) SUL865070= et EN60950/VDE0805 (Isolement renforc) -UL-cUL en cours SU865070 SSR Designed in conformity with EN60947-4-3 (IEC947-4-3) + and EN60950/VDE0805 (Reinforced Insulation) -UL-cUL pending WF311100 heatsink (*) 20A AC-51 see derating curve 400VAC Application Typical typique: application: moteurs, lampes, Motors, lamps, Dimensions : rsistances.... heaters,.... (*) : Thermo Mechanical Stress Solution PPrroouudd ttoo sseerrvvee yyoouu PPrroouudd ttoo sseerrvvee yyoouu celduc All technical caracteristics are subject to change without previous notice. r e l a i s Caractristiques sujettes modifications sans pravis.S/MON/SUL865070/A/10/07/2008 celpac page 2 / 7F/GB Caractristiques d entre / Control characteristics (at 25C) Input : Ic = f( Uc) DC 14 Paramtre / Parameter Symbol Min Typ Max Unit 12 Tension de commande / Control voltage Uc 3,5 5-12-24 32 V 10 Courant de commande / Control current ( Uc ) Ic <10 <14 <14 mA 8 Tension de non fonctionnement / Release voltage Uc off 2 V 6 LED d entre / Input LED jaune / yellow 4 Tension Inverse / Reverse voltage Urv 32 V 2 Tension de transil d entre / Clamping voltage (Transil) Uclamp 36 V 00 00 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Immunit / Input immunity : EN61000-4-4 2kV Uc (Vdc) Immunit / Input immunity : EN61000-4-5 2KV Caractristiques de sortie / Output characteristics (at 25C) Paramtre / Parameter Conditions Symbol Min Typ. Max Unit Plage de tension utilisation / Operating voltage range Ue 24 400 510 V rms Tension de crte / Peak voltage ( CLAMP VOLTAGE VDR) Up1200 (950) V Niveau de synchronisme / Zero cross level Usync 20 V Tension amorage / Latching voltage Ie nom Ua 10 V Courant nominal / nominal current (AC-51) Ie AC-51 see derating curve ( page 3) A rms Courant surcharge / Non repetitive overload current tp=10ms (Fig. 3) Itsm 530 580 A Chute directe l tat passant / On state voltage drop 25CVt 0,85V Rsistance dynamique / On state dynamic resistance rt 7,5 m Puissance dissipe (max) / 2 Pd 0,9x0,85xIe + 0,0075 x Ie W Output power dissipation (max value) Rsistance thermique jonction/semelle Rthj/c 0,6 0,75 K/W Thermal resistance between junction to case Courant de fuite l tat bloqu / Off state leakage current Ue typ, 50Hz Ilk 1 mA Courant minimum de charge / Minimum load current Iemin 5 mA Temps de fermeture / Turn on time Ue typ, 50Hz ton max 10 ms Temps d ouverture / Turn off time Ue typ, 50Hz toff max 10 ms Frquence utilisation/ Operating frequency range F mains f 0,1 50-60 800 Hz dv/dt l tat bloqu / Off state dv/dt dv/dt 500 V/ s di/dt max / Maximum di/dt non repetitive di/dt 50 A/ s 2 2 I2t (<10ms) I t 1404 1680 A s Immunit / Conducted immunity level IEC/EN61000-4-4 (bursts) 2kV criterion A Immunit / Conducted immunity level IEC/EN61000-4-5 (surge) 2kV criterion A Emission conduite /Conducted & emitted interference IEC60947-4-3 Class A for Industrial applications Protection court-circuit / Short circuit protection voir/see page 5 Example Fuse Ferraz gRC 25A/32A/50A Caractristiques gnrales / General characteristics (at 25C) Symbol Isolement entre/sortie - Input to output insulation Ui 4000 VRMS Isolation sortie/ semelle - Output to case insulation Ui 4000 VRMS Rsistance Isolement / Insulation resistance Ri 1000 ( 500VDC) M Tenue aux tensions de chocs / Rated impulse voltage Uimp 4000 V Degr de protection / Protection level / CEI529 IP20 (with cover or flaps) Vibrations / Vibration withstand 10 -55 Hz according to IEC 60068-2-6 10/55Hz 1,5 mm Tenue aux chocs / Shocks withstand according to IEC 60068-2-27 Half sinus /11ms 30 gn Temprature de fonctionnement / Ambient temperature (no icing, no - -40 /+80 C condensation) Temprature de stockage/ Storage temperature (no icing, no condensation) -40/+125 C Humidit relative / Ambient humidity HR 40 to 85 % Poids/ Weight 250 g Conformit / Conformity EN60947-4-3 (IEC947-4-3) Conformit / Conformity EN60950 / UL/cUL plastique du boitier / Housing Material PA 6 UL94V0 Semelle / Base plate Aluminium celduc www.celduc.com r e l a i s Rue Ampre B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tl. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tl. +33 (0) 4 77 53 90 19 Ic(mA)