L3867100 Cellevia

Specification Approval sheet Specification Approval Sheet Name Polymer Lithium-Ion Battery Model CELLEVIA BATTERIES LP3867100 SPEC 3.7V/ 2400mAh Number: 3867100 Specification Modification Records Modification Descriptions Issued Date Approved By Time Release 1 2016-03-21 Content 1.Scope: This specification describes the Product Specification of chargeable Polymer Lithium-Ion Battery produced by CELLEVIA BATTERIES Any copies are invalid without our compan ys approval Page 1 of 9 Specification Approval sheet 2.Model : CELLEVIA BATTERIES LP3867100 3.Cell parameters Index: 3.1 Single cell parameters No. Item Spec Note 1 Model 3867100 / 2400mAh Number Charge 2 4.2V Limited Voltage Nominal Cell Voltage between 3.6V ~3.9V before 3 3.7V Voltage shipping Nominal Capacity refer to the capacity of Nominal 2400mAh 0.2C 0.2C discharge with 2.75V cut-off voltage, 4 Capacity after charging with standard method. Discharge One cycle refer to one charge period and then one discharge period. Test condition: Charge: 0.2C to 4.2V 5 Cycle Life 300 Times Discharge: 0.2C to 2.75V The cycle life is the cycle times when the discharge capacity is about 80% of the rated capacity. After standard charging, storied at Self-discharge 6 Residual Capacity>90% 25C0.5C for 30 days, then measure the capacity as item 4. Typical: 36m After standard charging, measure the 7 Impedance internal resistance with AC1KHz Max. Charge 8 1C Current Max. Discharge 9 1C Current Discharge 10 Cut-off 2.75V Voltage Cells must be storied at 3.6V-3.9V. During long period storage, cells should be Operating maintained every 90 days. The method Discharge:-10C ~ +55C 11 is to do a charge-discharge cycle with Temperature Charge: 0 C ~ +43C standard method, then charge to 3.7 3.9V. Storage -20 C ~+45C 12 Temperature 13 Cell Weight Approx: 42.0g Length100.5mm Max Measured with weighting 300gf at Cell 25C0.5C Not including Tabs 14 Width67.5mm Max Dimension Thickness 4.3mm Max 15 Connector JST SYP-02T-1 + socket 2.54mm*2pins type Page 2 of 9