CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount TM NPCAP -PXKSeries Super low ESR, impedance and high heat resistance have been obtained by using PXK conductive polymer as electrolyte. Downsized Rated voltage range : 2.5 to 16Vdc, Capacitance range : 100 to 560F Suitable for DC-DC converters, voltage regulators and decoupling applications used to PXE P36 computer motherboards etc. RoHS Compliant Halogen Free SPECIFICATIONS Items Characteristics Category -55 to +105 Temperature Range Rated Voltage Range 2.5 to 16V dc Capacitance Tolerance 20% (M) (at 20, 120Hz) Surge Voltage Rated voltage1.15V (at 105) Leakage Current Shall not exceed values shown in STANDARD RATINGS. (at 20 after 2 minutes) Dissipation Factor 0.12 max. (at 20 , 120Hz) (tan ) Low Temperature Z(-25)/Z(+20)1.15 Characteristics Z(-55)/Z(+20)1.25 (at 100kHz) (Max. Impedance Ratio) Endurance The following specications shall be satised when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours (F46 : 1,000 hours) at 105 . Appearance No signicant damage Capacitance change 20% of the initial value DF (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Bias Humidity The following specications shall be satised when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours (F46 : 500hours). Appearance No signicant damage Capacitance change 20% of the initial value DF (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specied at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No signicant damage Capacitance change 20% of the initial value DF (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Failure Rate 0.5% per 1,000 hours maximum (Condence level 60% at 105 ) *Note : If any doubt arises, measure the leakage current after following voltage treatment. Voltage treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105. DIMENSIONS mm MARKING EX) 2.5V330F Terminal Code : A W K89A 330 V Size Code L A B C W P D 2.5 E61 5 5.8 5.3 5.3 5.9 0.5 to 0.8 1.4 F46 6.3 4.5 6.6 6.6 7.2 0.5 to 0.8 1.9 F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9 0.3max. A0.2 L0.3 (Note) Note : L+0.1/-0.2 for F46 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PXK A RA M G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330F:331, 560F:561) Taping code Terminal code Voltage code (ex. 2.5V:2R5, 6.3V:6R3) Series code Category Please refer toProduct code guide (conductive polymer type Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 30 CAT. No. E1001N D0.5 B0.2 P C0.2CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount TM NPCAP -PXKSeries STANDARD RATINGS WV Cap Size Leakage current ESR Rated ripple current Part No. (Vdc) (F) code (A max./after 2min.) (m max./20 , 100k to 300kHz) (mArms/105 , 100kHz) 220 F46 300 19 2,780 APXK2R5ARA221MF46G 330 E61 412 16 3,500 APXK2R5ARA331ME61G 2.5 330 F46 700 16 3,500 APXK2R5ARA331MF46G 560 F61 700 16 3,500 APXK2R5ARA561MF61G 180 F46 360 19 2,780 APXK4R0ARA181MF46G 4 220 E61 440 17 3,390 APXK4R0ARA221ME61G 390 F61 780 17 3,390 APXK4R0ARA391MF61G 150 F46 472 19 2,780 APXK6R3ARA151MF46G 180 E61 567 17 3,390 APXK6R3ARA181ME61G 6.3 220 F46 700 18 3,200 APXK6R3ARA221MF46G 330 F61 1,040 17 3,390 APXK6R3ARA331MF61G 16 100 F61 320 24 2,490 APXK160ARA101MF61G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 31 CAT. No. E1001N