Size code MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, 125 GXL GXLSeries Long-Life version of GXE series Longer life For automobile modules and other high temperature applications GXE P206 Endurance with ripple current : 5,000 hours at 125 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATIONS Items Characteristics Category -40 to +125 Temperature Range Rated Voltage Range 10 to 50Vdc Capacitance Tolerance 20% (M) (at 20, 120Hz) Leakage Current I=0.03CV or 4A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 1 minute) Dissipation Factor Rated voltage (Vdc) 10V 16V 25V 35V 50V (tan ) tan (Max.) 0.20 0.16 0.14 0.12 0.10 (at 20 , 120Hz) Low Temperature Rated voltage (Vdc) 10V 16V 25V 35V 50V Characteristics Z(-25 )/Z(+20 ) 3 2 2 2 2 (Max. Impedance Ratio) Z(-40)/Z(+20) 6 4 4 4 4 (at 120Hz) Endurance The following specications shall be satised when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 125 . Capacitance change 30% of the initial value D.F. (tan ) 300% of the initial specied value Leakage current The initial specied value Shelf Life The following specications shall be satised when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specied value Leakage current The initial specied value DIMENSIONS mm Terminal Code : E Sleeve (PET : Orange) D 10 d 0.6 F 5.0 D D+0.5max. Vent L 15min. 4min. (10) L L+1.5max. Gas escape end seal PART NUMBERING SYSTEM 1 23 4 56 7 8 9 10 11 12 13 15 16 17 14 18 E GXL AAA E AA AAA M AAA S Supplement code Capacitance tolerance code Capacitance code (ex. 100 F:101, 1,000F:102) Lead formingtaping code Terminal code Voltage code (ex. 10V:100, 50V:500) Series code Category Please refer toProduct code guide (radial lead type Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 208 CAT. No. E1001O D d F0.5MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, 125 GXLSeries STANDARD RATINGS WV Cap Case size Impedance Rated ripple current Part No. (Vdc) (F) D L(mm) ( max./20 , 100kHz) (mArms/125 , 100kHz) 330 1012.5 0.17 800 EGXL100E331MJC5S 10 470 1012.5 0.17 800 EGXL100E471MJC5S 1,000 1020 0.094 1,300 EGXL100E102MJ20S 220 1012.5 0.17 800 EGXL160E221MJC5S 16 330 1012.5 0.17 800 EGXL160E331MJC5S 470 1016 0.12 1,050 EGXL160E471MJ16S 220 1012.5 0.17 800 EGXL250E221MJC5S 25 330 1016 0.12 1,050 EGXL250E331MJ16S 470 1020 0.094 1,300 EGXL250E471MJ20S 100 1012.5 0.17 800 EGXL350E101MJC5S 35 220 10 16 0.12 1,050 EGXL350E 221MJ16S 330 10 20 0.094 1,300 EGXL350E 331MJ20S 100 10 12.5 0.30 590 EGXL500E 101MJC5S 50 220 1020 0.19 970 EGXL500E221MJ20S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 120 1k 10k 100k 100 0.40 0.75 0.90 1.00 220 to 470 0.50 0.85 0.94 1.00 1,000 0.60 0.87 0.95 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 209 CAT. No. E1001O