MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105 LBV LBVSeries Downsizing of LBG series. Downsized For airbag application and power supply application LBG High capacitance, low ESR and good low temperature behavior Endurance with ripple current : 5,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS2 Compliant AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. SPECIFICATIONS Items Characteristics Category -55 to +105 Temperature Range Rated Voltage Range 25 & 35V dc Capacitance Range 3,000 to 15,000F (at 20 , 120Hz) Capacitance Tolerance 0 to +30% (A) (at 20, 120Hz) Leakage Current I=0.01CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Dissipation Factor Rated voltage (Vdc) 25V 35V (tan ) tan (Max.) 0.20 0.16 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20 , 120Hz) Low Temperature Rated voltage (Vdc) 25V 35V Characteristics Z(-55)/Z(+20) 3 3 (Max. Impedance Ratio) (at 120Hz) Endurance The following specications shall be satised when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105 . Capacitance change 30% of the initial value D.F. (tan ) 300% of the initial specied value Leakage current The initial specied value Shelf Life The following specications shall be satised when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specied value Leakage current The initial specied value DIMENSIONS mm Terminal Code : E Sleeve (PET : Brown) D 16 18 d 0.8 0.8 F 7.5 7.5 D D+0.5max. L L+1.5max. Vent L 15min. 4min. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E LBV AAA E AA AAA A AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 5,600F:562, 12,000F:123) Lead formingtaping code Terminal code Voltage code (ex. 25V:250, 35V:350) Series code Category Please refer toProduct code guide (radial lead type Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U D d F0.5MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105 LBVSeries STANDARD RATINGS ESR ( max./100kHz) WV Cap Case size Rated ripple current tan Part No. (Vdc) ( F) D L (mm) (mArms/105 , 100kHz) 20 -40 4,400 16 20 0.26 0.030 0.095 2,000 ELBV250E442AL20S 5,700 18 20 0.28 0.028 0.080 2,100 ELBV250E572AM20S 6,200 16 25 0.30 0.024 0.073 2,300 ELBV250E622AL25S 8,100 18 25 0.34 0.022 0.060 2,400 ELBV250E812AM25S 8,500 16 31.5 0.34 0.020 0.065 2,550 ELBV250E852ALN3S 25 9,900 16 35.5 0.36 0.018 0.055 2,700 ELBV250E992ALP1S 11,000 16 40 0.40 0.016 0.050 2,900 ELBV250E113AL40S 11,000 18 31.5 0.40 0.018 0.045 2,700 ELBV250E113AMN3S 12,000 18 35.5 0.42 0.016 0.040 2,900 ELBV250E123AMP1S 15,000 18 40 0.48 0.015 0.035 3,100 ELBV250E153AM40S 3,000 16 20 0.20 0.030 0.095 2,000 ELBV350E 302AL20S 4,000 18 20 0.22 0.028 0.080 2,100 ELBV350E 402AM20S 4,300 16 25 0.22 0.024 0.073 2,300 ELBV350E 432AL25S 5,600 18 25 0.24 0.022 0.060 2,400 ELBV350E562AM25S 5,900 16 31.5 0.24 0.020 0.065 2,550 ELBV350E592ALN3S 35 6,900 16 35.5 0.26 0.018 0.055 2,700 ELBV350E692ALP1S 7,600 18 31.5 0.28 0.018 0.045 2,700 ELBV350E762AMN3S 8,200 16 40 0.30 0.016 0.050 2,900 ELBV350E822AL40S 9,000 18 35.5 0.32 0.016 0.040 2,900 ELBV350E902AMP1S 10,000 18 40 0.34 0.015 0.035 3,100 ELBV350E103AM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 120 1k 10k 100k Capacitance(F) 3,000 0.75 0.90 0.95 1.00 4,000 to 15,000 0.85 0.95 0.98 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U