LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminals ,105 LXR LXRSeries Higher ripple Higher ripple capability than LXA series Endurance with ripple current : 5,000 hours at 105 LXA P316 RoHS Compliant SPECIFICATIONS Items Characteristics Category -25 to +105 Temperature Range Rated Voltage Range 350 to 450Vdc Capacitance Tolerance 20% (M) (at 20, 120Hz) Leakage Current I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 5 minutes) Dissipation Factor 0.15max. (tan ) (at 20, 120Hz) Low Temperature Capacitance change C (-25 )/C(+20)0.7 Characteristics (at 120Hz) Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than than 100M. Insulation When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp Withstanding Voltage on the insulating sleeve covering the case, there shall not be electrical damage. Endurance The following specications shall be satised when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105 . Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specied value Leakage current The initial specied value Shelf Life The following specications shall be satised when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specied value Leakage current The initial specied value DIMENSIONS (Screw-Mount) mm Terminal Code : LG Mounting Clamp Code : B Mounting Clamp Code : C 360 A 1 3 W1 Sleeve (Pb-free PVC : Brown) 455 6 305 Vent 8 L+4max. G1 J Plastic disk D A B W F D E K F J 63.5 & 76.2 : G=6 63.5 90 76 80 28.0 63.5 38.1 43.5 28.0 14.0 76.2 104.5 90 93.5 31.5 76.2 44.5 50.0 31.5 14.0 89 : G=4 89 50.8 56.5 31.5 16.0 100 : G=10 100 56.5 63.4 41.5 18.0 <Screw specications> to 89 Plus hexagon-headed screw :M50.810 100 Cross-recessed head (Phillips) screw : M81.2516 Spring washer,Washer Maximum screw tightening torque :3.23Nm Maximum screw tightening torque :6.31Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E LXR AAA LG N AAA M AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 3,300F:332, 10,000F:103) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351,400V:401) Series code Category Please refer toProduct code guide (screw-mount terminal type Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 320 CAT. No. E1001O F1 D+1.8max. 4.5 B1 K 1 E 1 4.5LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminals ,105 LXRSeries STANDARD RATINGS Rated ripple Rated ripple WV Cap Case size current WV Cap Case size current tan Part No. tan Part No. (Vdc) (F) D L(mm) (Arms/ (Vdc) (F) D L(mm) (Arms/ 105 , 120Hz) 105 , 120Hz) 3,300 63.5 115 0.15 14.4 ELXR351LGC332MDB5M 6,800 76.2 170 0.15 27.3 ELXR401LGC682MEH0M 3,900 63.5 130 0.15 16.6 ELXR351LGC392MDD0M 6,800 89 155 0.15 26.6 ELXR401LGC682MFF5M 4,700 63.5 155 0.15 19.8 ELXR351LGC472MDF5M 400 8,200 89 170 0.15 30.5 ELXR401LGC822MFH0M 4,700 76.2 115 0.15 19.1 ELXR351LGC472MEB5M 10,000 100 190 0.15 34.5 ELXR401LGC103MGK0M 5,600 63.5 170 0.15 22.5 ELXR351LGC562MDH0M 12,000 100 220 0.15 40.2 ELXR401LGC123MGN0M 5,600 76.2 130 0.15 21.9 ELXR351LGC562MED0M 2,200 63.5 115 0.15 11.8 ELXR451LGC222MDB5M 350 6,800 76.2 155 0.15 26.2 ELXR351LGC682MEF5M 2,700 63.5 130 0.15 13.7 ELXR451LGC272MDD0M 8,200 76.2 170 0.15 30.0 ELXR351LGC822MEH0M 2,700 76.2 115 0.15 14.5 ELXR451LGC272MEB5M 8,200 89 155 0.15 29.2 ELXR351LGC822MFF5M 3,300 63.5 155 0.15 16.5 ELXR451LGC332MDF5M 10,000 89 170 0.15 33.7 ELXR351LGC103MFH0M 3,300 76.2 130 0.15 16.9 ELXR451LGC332MED0M 12,000 100 190 0.15 37.8 ELXR351LGC123MGK0M 3,900 63.5 170 0.15 18.7 ELXR451LGC392MDH0M 15,000 100 250 0.15 47.7 ELXR351LGC153MGR0M 450 4,700 76.2 155 0.15 21.7 ELXR451LGC472MEF5M 2,700 63.5 115 0.15 13.1 ELXR401LGC272MDB5M 5,600 76.2 190 0.15 26.1 ELXR451LGC562MEK0M 3,300 63.5 130 0.15 15.2 ELXR401LGC332MDD0M 5,600 89 155 0.15 24.1 ELXR451LGC562MFF5M 3,900 63.5 155 0.15 17.9 ELXR401LGC392MDF5M 6,800 89 170 0.15 27.8 ELXR451LGC682MFH0M 400 3,900 76.2 115 0.15 18.2 ELXR401LGC392MEB5M 8,200 89 190 0.15 32.0 ELXR451LGC822MFK0M 4,700 63.5 170 0.15 20.5 ELXR401LGC472MDH0M 10,000 100 220 0.15 36.8 ELXR451LGC103MGN0M 4,700 76.2 130 0.15 20.1 ELXR401LGC472MED0M 12,000 100 250 0.15 42.7 ELXR451LGC123MGR0M 5,600 76.2 155 0.15 23.8 ELXR401LGC562MEF5M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) 120 300 1k 3k Coefcient 1.0 1.1 1.3 1.4 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LXR series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 321 CAT. No. E1001O