KHD251E156M99C0B00 Chemi-Con

DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS RoHS Compliant FEATURES 1. Small size and large capacitance, high ripple current. 2. Temperature characteristic is Y5U in EIA code. 3. Superior humidity characteristic and long life. 4. Excellent noise absorption. 5. Resin(UL94 V-0) used for coating. APPLICATIONS 1. Automotive equipments. 2. Smoothing circuit of switching mode AC-DC or DC-DC converter. 3. Noise suppressor for various kinds of equipments. 4. By-pass or decoupling circuits. CONSTRUCTION Ceramic Dielectric Coating Resin Termination Solder (Pb-free) Internal Electrode Lead Wire RATINGS 1. Category Temperature Range -55 to +125C 2. Rated Voltage Range 16, 25, 50, 100, 250 Vdc 3. Rated Capacitance Range 0.1 to 680MF 80 4. Rated Capacitance Tolerance M(P20%), Z(P %) 20 5. Temperature Characteristics E(JIS) Y5U(EIA) 6. Rated Ripple Current See No.5 on the following table SPECIFICATIONS No. Items Specification Test Condition 1 Withstand Between No abnormality. 250% of rated voltage shall be applied for 5 seconds. Voltage Terminals Terminals to Coating Resin 2 Insulation Resistance 1000/CR(MO) or 10000(MO) Rated voltage shall be applied for 60P5 seconds at whichever is less. temperature 20P2C. 3 Rated Capacitance Within specified tolerance. Temperature : 20P2C Frequency : 1P0.1kHz( 100MF,120Hz) Voltage : 1P0.2Vrms 4 Dissipation Factor 5.0% maximum. Temperature : 20P2C Frequency : 1P0.1kHz( 100MF,120Hz) Voltage : 1P0.2Vrms (1/3) CAT. No. E1002NDIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS SPECIFICATIONS No. Items Specification Test Condition Size code 32 43 55 76 80 90 99 10kHz to 1MHz (sine curve) 5 Rated Ripple Current Arms 0.3 0.8 1.0 1.5 2.0 3.0 4.0 Ripple voltage Vp shall be less than the rated voltage. 6 Robustness Tension No visible damage. The force applied shall be : of Lead F (mm) Tensile(N) (sec.) Terminations 0.5 max. 5 10P1 0.6 to 0.8 max. 10 10P1 Bending Lead F (mm) Bending(N) (kg) 0.5 max. 2.5 0.25 0.6 to 0.8 max. 5 0.51 Time : 2times. 7 Vibration Appearance : No abnormality. Amplitude : 1.5mm Capacitance : To meet the initial Frequency range : 10-55-10Hz (1 min) specification. Direction and time : D.F. : To meet the initial specifications. 2 hours each to X, Y, Z axis. Total 6 hours. Solder Pb Free Eutectic 8 Solderability Min. 75% of surface of the termination shall be covered with new solder. Solder Temperature 245P5C 235P5C Dipping Time 2P0.5sec. 9 Resistance to Soldering Heat Appearance : No abnormality. Solder Temperature : 350P10C DC/C : P15% Dipping Time : 3P0.5 sec. D.F. : Satisfy the initial spec. Depth : 1.5 to 2mm 10 Temperature Cycle Appearance : No abnormality. Step Temperature (C) (min.) DC/C : P15% 1 Min. Category temperature P3 30P3 D.F. : To meet the initial specification 2 Room temperature 3 max. I.R. : To meet the initial specification 3 Max. Category temperature P3 30P3 4 Room temperature 3 max. For 5 cycles for above temperature cycle. 11 Humidity Load Life Appearance : No abnormality. Temperature : 40P2C DC/C : P20% Humidity : 90 to 95%RH D.F. : 7% maximum Voltage : Rated voltage 24 I.R. : 50/CR(MO) or 1000(MO) Time : 500P hours 0 whichever is less. Temperature : 85P2C 12 Endurance Appearance : No abnormality. Voltage : 200% of rated voltage. DC/C : P20% 48 D.F. : 7% maximum Time : 1000P hours 0 I.R. : 100/CR(MO) or 1000(MO) Temperature : 125P3C whichever is less. Voltage : Rated voltage 48 Time : 1000P hours 0 *CR : Rated Capacitance(MF) PART NUMBERING SYSTEM DIMENSIONS 132645178910 11213 14 15 16 17 18 Crimped lead Straight lead K H D 5 0 0 E 1 0 6 M 5 5 A 0 T 0 0 32K76 size For all size Supplement code Taping code L L T T Terminal code Size code Capacitance tolerance code Nominal Capacitance code Temperature characteristics code F F Rated voltage code Series code Category d d (2/3) CAT. No. E1002N W 15min. W 15min.