MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS High reliability, Low impedance, 105C LXZ Lower Z Downsized Adoption of innovative electrolyte and new technologies Endurance with ripple current : 2,000 to 8,000 hours at 105C LXY Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Lower Z RoHS Compliant LXV SPECIFICATIONS Items Characteristics Category -55 to +105C Temperature Range Rated Voltage Range 10 to 63Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) Leakage Current I=0.01CV or 3MA, whichever is greater. Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes) Dissipation Factor Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V (tane) tanE (Max.) 0.19 0.16 0.14 0.12 0.10 0.10 When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase. (at 20C, 120Hz) Low Temperature 10Vdc to 50Vdc : 3max. Z(-55C)/Z(+20C) Characteristics 63Vdc : 6max. (Max. Impedance Ratio) (at 120Hz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple current is applied for the specified period of time at 105C. Time F5 & 6.3 : 2,000hours F8 : 3,000hours F10 : 5,000hours F12.5 : 7,000hours F16 & 18 : 8,000hours Capacitance change P20% of the initial value D.F. (tanE) 200% of the initial specified value Leakage current The initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change P20% of the initial value D.F. (tanE) 200% of the initial specified value Leakage current The initial specified value DIMENSIONS mm Terminal Code : E Sleeve (PET : Dark blue) fD 5 6.3 8 10 12.5 16 fd 0.5 0.5 0.6 0.6 0.6 0.8 5.0 7.5 F 2.0 2.5 3.5 5.0 fD FD+0.5max. L 15min. 4min. L L+1.5max. (F5 to F10) (F12.5 to F16) Gas escape end seal Vent (Except F5 & F6.3) PART NUMBERING SYSTEM 132645178910 11213 14 15 16 17 18 E L X Y A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 120MF:121, 2,200MF:222) Lead formingtaping code Terminal code Voltage code (ex. 10V:100, 25V:250, 63V:630) Series code Category Please refer toProduct code guide (radial lead type RATED RIPPLE CURRENT MULTI PLI ERS Frequency Mul ti pli ers Frequency (Hz) 120 1k 10k 100k The endurance of capacitors is reduced with internal heating produced by ripple Capacitance (mF) 10 to 180 0.40 0.75 0.90 1.00 current at the rate of halving the lifetime with every 5C rise. 220 to 560 0.50 0.85 0.94 1.00 When long life performance is required in actual use, the rms ripple current has to 680 to 1,800 0.60 0.87 0.95 1.00 be reduced. 2,200 to 3,900 0.75 0.90 0.95 1.00 4,700 to 8,200 0.85 0.95 0.98 1.00 (1/2) CAT. No. E1001K FD Fd FP0.5 FP0.5