MVK16VC10RMD55TP Chemi-Con

Tentative Vertical Surface Mount Type Engineering Bulletin No.553E/Jul.2011 Aluminum Electrolytic Capacitors Endurance : 1,000 to 2,000 hours at 105 Suitable to t for downsized equipment Solvent resistant type RoHS Compliant MVK series will be discontinued, strongly recommended MVE series SPECIFICATIONS Items Characteristics Category -40 to +105 Temperature Range Rated Voltage Range 6.3 to 50Vdc Capacitance Tolerance 20% (M) (at 20 , 120Hz) Leakage Current I=0.01CV or 3 A, whichever is greater. Where, I : Max. leakage current ( A), C : Nominal capacitance ( F), V : Rated voltage (V) (at 20 after 2 minutes) Dissipation Factor Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V (tan ) D55 to F55 0.30 0.24 0.20 0.16 0.14 0.12 tan (Max.) H63 to JA0 0.40 0.30 0.26 0.16 0.14 0.12 (at 20 ,120Hz) Low Temperature Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Characteristics Z(-25 )/Z(+20 ) 4 3 2 2 2 2 (Max. Impedance Ratio) Z(-40 )/Z(+20 ) 10 8 6 4 3 3 (at 120Hz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for the specified period of time at 105 . Case code D55 to F55 H63 to JA0 Time 1,000hours 2,000hours 20% of the initial value Capacitance change 30% of the initial value D.F. (tan ) 300% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for the specified time at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Case code D55 to F55 H63 to JA0 Time 500hours 1,000hours Capacitance change 25% of the initial value 20% of the initial value D.F. (tan ) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value DIMENSIONS mm MARKING Terminal Code : A W EX) 6.3V100 F Size code D L A B C W P 7hK D55 4 5.2 4.3 4.3 5.1 0.5 to 0.8 1.0 E55 5 5.2 5.3 5.3 5.9 0.5 to 0.8 1.4 100 F55 6.3 5.2 6.6 6.6 7.2 0.5 to 0.8 1.9 6.3V H63 8 6.3 8.3 8.3 9.0 0.5 to 0.8 2.3 HA0 8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1 0.3max. A 0.2 JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5 L 0.3 (Note) Note : L 0.5 for H63 to JA0 PART NUMBERING SYSTEM 132645178910 11123 14 15 16 17 18 E M V K A D A M G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7 F:4R7,10 F:100) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category Specifications in this bulletin are subject to change without notice. NIPPON CHEMI-CON CORPORATION 1532 1 D 0.5 B 0.2 P C 0.2