10-25L Chemtronics

CHEMTRONICS TDS CWik Technical Data Sheet Chem-Wik Rosin PRODUCT DESCRIPTION TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Chem-Wik Rosin is especially designed for todays heat sensitive electronic components. Chem-Wik Rosin The lighter mass, pure copper braid construction allows for better thermal Flux Type: Grade WW, Type R conductivity, even at low temperatures. Clean-up Required: No Chem-Wik Rosin responds as much as 50% faster than conventional desoldering braids. Military Specifications: MIL-F-14256F This design minimizes overheating and Shelf Life 2 years from manufacturer requires less contact pressure for greater date operator control. All sizes are coated with a Type R organic flux system. Requires little or no post solder cleaning Size Size No corrosive residues Part Inches Metric Optimized weave design for faster 2-5L .030 .76mm wicking and heat transfer Halide free 5-5L .050 1.27mm Minimal risk of heat damage to 7-5L .075 1.91mm components and circuit boards 10-5L .100 2.54mm TYPICAL APPLICATIONS Chem-Wik Rosin desoldering braid safely removes solder from: STATIC DISSIPATIVE PACKAGING Static Dissipative packaging is available on Thru-hole Components all 5 foot bobbins. The static dissipative Surface Mount Device Pads bobbins qualify as electrostatic discharge BGA Pads protective per DOD Standard 1686 and DOD Micro Circuits Handbook 263. Meets the static delay rate Terminals provision of MIL-B-81705C. Lugs and Posts Identification Script USAGE INSTRUCTIONS For industrial use only. 5) As solder becomes molten, the color of the Read MSDS carefully prior to use. wick will change from copper to silver. 1) Choose a Chem-Wik desoldering braid 6) Remove wick and iron from solder joint width equal to or slightly larger than the simultaneously once color change has stopped. pad or connection. 7) The component lead is now clean and free 2) Choose a solder iron tip equal to or slightly from solder. smaller than the pad or connection. 8) Clip and discard the used portion of the wick. 3) Set temperature of iron between 600-750F 4) Place wick on solder joint and place tip of hot iron on top of wick AVAILABILITY Color 5 ft. 25 ft. 50 ft. 100 ft. 500 ft. Width Code Bobbin Spool Spool Spool Spool .030 White 2-5L 2-25L 2-50L 2-100L 2-500L .050 Yellow 5-5L 5-25L 5-50L 5-100L 5-500L .075 Green 7-5L 7-25L 7-50L 7-100L 7-500L .100 Blue 10-5L 10-25L 10-50L 10-100L 10-500L NOTE: Chem-Wik Rosin is designed to meet This information is believed to be accurate. It is or exceed the following standards: intended for professional end users having the skills MIL-F-14256F, Type R to evaluate and use the data properly. MIL-STD-2000A CHEMTRONICS does not guarantee the accuracy of MIL-B-81705C the data and assumes no liability in connection with NASA NHB5300.4(3A) damages incurred while using it. NASA SP-5002 NASA NPC200-4 CHEMTRONICS IPC SF-818 8125 COBB CENTER DRIVE DOD Handbook 263 KENNESAW, GA 30152 DOD Standard 1686 1-770-424-4888 REV. D (08/13) BELLCORE TR-NWT-00078 DISTRIBUTED BY: TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401.