75 School Ground Road Branford, CT 06405 Toll free: 800-435-0317 AMTECH Phone: 203-481-0362 Advanced SMT Solder Products Fax: 203-481-5033 www.amtechsolder.com An ISO 9001 Certified Company Material Safety Data Sheet Amtech, Inc. Revised: 08/06 75 Schoolground Rd. Branford, CT 06405 Office Telephone: (203) 481-0362 Emergency Telephone: (800) 435-0317 Section 1: Identification Product Name: AMTECH Core Wire: No-Clean (NC), Water-Soluble (WS), Rosin Active (RA), Rosin Mildly Active (RMA), 4300, LF-4300 and SynTECH Chemical Family: Mixture Formula: Proprietary CAS Registry Number: Not applicable since product is a mixture. Manufactured by: AMTECH, Inc. (1) Section 2: Composition/Ingredient Data (1) Hazardous Ingredients C.A.S. Weight OSHA ACGIH TLV LD 50 LD50 Number Percent PEL TWA Ingested Inhaled 3 3 3 mg/m mg/m g/Kg g/m (2) Modified Rosins NA <45 NE NE NE NE Terpineol 8000-41-7 <15 NE NE NE NE (2) Mixed Carboxylic Acids NA <4 NE NE NE NE Lead 7439-92-1 Product 0.05 0.15 NE NE Tin 7440-31-5 contains one 2.00 2.00 NE NE Silver 7440-22-4 or more of 0.01 0.10 NE NE these metallic Bismuth 7440-69-9 NE NE NE NE Antimony 7440-36-0 elements in 0.50 0.50 7.0 Rat NE Indium 7440-74-6 varying NE 0.10 NE NE Copper 7440-50-8 percentages 1.00 1.00 NE NE NA - Not Applicable NE - Not Established 75 School Ground Road Material Safety Data Sheet Branford, CT 06405 Toll free: 800-435-0317 Phone: 203-481-0362 Fax: 203-481-5033 www.amtechsolder.com Non-Hazardous Ingredients Surfactants NA <4 OSHA: Occupational Safety and Health Administration Rheological Modifier NA <5 PEL: Permissible Exposure Limit ACGIH: American Conference of Gov. Indus. Hygienists TLV: Threshold Limit Values STEL: Short-Term Exposure Limit TWA: Time Weighted Average C.A.S.: Chemical Abstract Service NA - Not Applicable NE - Not Established (1) Per 29 CFR 1910 the mixture has not been tested as a whole. All hazardous components, which comprise > 1% of the mixture (0.1% if carcinogenic) is listed. Percentages of individual components are not listed as this information is considered a trade secret. (2) The identity of the specific chemical(s) is being withheld as a trade secret per 29 CFR 1910.1200. The hazardous properties of these ingredients are disclosed in this MSDS. Section 3: Hazards Identification PRINCIPAL HEALTH EFFECTS: Toxic effects described in animals from exposure to component(s) of this product by inhalation, ingestion, skin or eye contact include: Skin sensitization, skin irritation, moderate to severe eye irritation, liver effects, kidney effects. Human health effects of over exposure to components of this product may include: Allergic skin rashes, skin irritation with discomfort or rash, shortness of breath. OTHER EFFECTS AND ADDITIONAL HEALTH HAZARD INFORMATION: Skin sensitization may be caused in susceptible humans. Molten solder alloys consisting of lead, tin, silver, bismuth, antimony and/or indium do not produce significant quantities of fume below 900 degrees F. Section 4: First Aid Measures SKIN CONTACT: In case of contact, immediately wash skin with soap and plenty of water. EYE CONTACT: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Call a physician. INHALATION: If large amounts are inhaled, remove to fresh air. If not breathing, give artificial respiration, preferably mouth- to-mouth. INGESTION: If swallowed, do not induce vomiting, immediately give two glasses of water or activated charcoal slurry. Never give anything by mouth to an unconscious person. Call a physician. INSTRUCTIONS TO PHYSICIAN: To prepare activated charcoal slurry, suspend 50 g activated charcoal in 400-ml water in a plastic bottle and shake well. Administer 5 ml/kg of body weight, or 350 ml for an average adult.