Professional dispenser - CMS 450.V2 DOTTY Ed.090706 Professional unit for dosing of glues, solder pastes as well as low viscosity products. The dispenser CMS 450.V2 DOTTY can work in autonomous mode or in combination with a pick & place machine. The DOTTY dispensers can work under 5 different ways Manual dispenser Semi-automatic dispenser Automatic dispenser Component mode Teaching mode Description Item code Key features Dispenser CMS 450.V2 DOTTY F41 020.1 Facility of use Technical characteristics CMS 450.V2 DOTTY 5 different modes of functioning Max. pressure 10 bars at the inlet Accuracy Using pressure during dispensing mode 0,1 to 7 bars Compacts & ergonomic Sound level < 40 dBA Digital display Net weight 2,0 Kg 15 W Total power 10 programmes Electrical supply 230 V - 50/60 Hz The Professional Tools Professional dispenser - CMS 450.V2 DOTTY Ed.090706 Syringe holder Digital display Navigation through Joystick Air inlet Manometer of pressure Pressure Connexion for Foot pedal control regulator syringe Ergonomics and exceptional features Manual mode Pushing on the pedal, the product deposit will be done when the control is done. Getting of the pedal will stop the deposit Semi-automatic mode Pushing on the pedal, a x quantity of deposit is done once. You need to push again on the pedal to start a new deposit. Automatic mode Remaining on the pedal, a x quantity deposit is done every x repetitions until the pedal is stopping Component mode Allows to memorize a sequence of 99 steps by teaching mode. Very interesting if you want to memorize components as integrated circuit. 10 memories ( P0 to P9) are available to memorize your component. Learning mode This programme automatically defines deposit and repetition times according to work to do. You just need to make 10 manual deposits depending on the requested rate and the unit will analyse, making an average of appropriate times. Once learning mode is finished, the unit will get back to automatic mode. The CMS 450.V2 DOTTY is delivered complete with a set of needles, a set of suction cups, a 10cc syringe and a foot pedal control. To be connected to a compressed air network or on a Compressor The Professional Tools