V11 CHASSIS MOUNT DC-DC CONVERTERS HALF BRICK PACKAGE WITH HEATSINK 33 TO 100 WATT 4:1 INPUT RANGE FEATURES * 33-100W Isolated Output * 4:1 Wide Input Range * Chassis Mount/Din Rail Mount * Input Over Voltage Protection * Regulated Outputs * Continuous Short Circuit Protection * CE Mark Meets 2004/108/EEC * Safety Meets UL60950-1, EN60950-1, and IEC60950-1 * UL60950-1 Approval for DC Modules (Excludes CHE75W, CHE100W and 28Vout) Ordering Information CHB(E)XXX- XX S XX N -XXX +X-XXXX Heat Sink Type Model No. Nominal Input Voltage Output Voltage Remote ON/OFF (Option) 3V3/33: 3.3VDC CHB50W 05: 5VDC CHB75W 12: 12VDC CM: Chassis Mount CHE75W M-C308 Single Output 15: 15VDC None: Positive Logic 24 24VDC DIN: Din Rail Mount CHB100W M-C091 24: 24VDC CHE100W N: Negative Logic 48 48VDC M-C092 48: 48VDC CHB50W CHB75W 28: 28VDC CHB100W Require input and output aluminum capacitor connected in the table below. MODEL NUMBER INPUT OUTPUT CHB50W-XXSXX-CM/DIN NC 47uF/100V for 48Vout Models Only CHB75W-XXSXX-CM/DIN 47uF/100V for 48Vin Models 47uF/100V for 48Vout Models Only CHE75W-XXSXX-CM/DIN 100uF/100V 10uF/100V for 48Vout Models Only 100uF/100V for 24Vin Models CHB100W-XXSXX-CM/DIN 47uF/100V for 48Vout Models Only 47uF/100V for 48Vin Models CHE100W-XXSXX-CM/DIN 220uF/100V 10uF/100V for 48Vout Models Only NOTE: 1. Short JP1 to connect +S and +Vo, JP2 to connect S and Vo with local sense. 2. Remove jumper( JP1& JP2),terminal block port +S,-S & Trim can be used to Output Remote Sensing or Output Voltage Adjustment functional(see application note). 3. Thermal resistance is referenced to the application note. 4. Include TVS for input surge voltage protection. 5. Recommend external fuse for input reverse polarity protection (Include shunt diode inside). 6. Suffix DIN to the Model number with din mount, the clip is suitable for TS-35 din rail. 1 V11 POWER DERATING CURVE Typical Derating Curves at Nominal Line, Full Load, and natural convection CHB50W-48S12-CM/DIN Typical Power De-rating Curve CHB75W-48S12-CM/DIN Typical Power De-rating Curve 120% 120% 61 66 71 38 46 54 100% 100% 80% 80% 60% 60% M-C308 M-C308 M-C091 M-C091 40% 40% M-C092 M-C092 20% 20% 0% 0% -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 Temperature() Temperature() CHE75W-48S12-CM/DIN Typical Power De-rating Curve CHB100W-48S12-CM/DIN Typical Power De-rating Curve 120% 120% 38 46 54 76 80 84 100% 100% 80% 80% 60% 60% M-C308 M-C308 M-C091 M-C091 40% 40% M-C092 M-C092 20% 20% 0% 0% -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 Temperature() Temperature() CHE100W-48S12-CM/DIN Typical Power De-rating Curve Mechanical Specification 120% PIN CONNECTIONS 80 72 76 100% PIN FUNCTION PIN FUNCTION 1,2 +V Input 11 +Sense 80% 3,4 -V Input 12 Trim 60% M-C308 5 On/Off 13 -Sense M-C091 40% 6 CASE JP1 Short +S& +Vo M-C092 20% 7,8 +V Output JP2 Short S& -Vo 9,10 -V Output 0% -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 Suffix -CM (Left Side) / SuffixDIN(Right Side) Temperature() 2 Load Load Load Load Load