V13 CHE100W SERIES 100 WATT 4:1 INPUT DC-DC CONVERTERS SINGLE OUTPUT FEATURES * 100W Isolated Output * Half-Brick Size, Six-Sided Shield Metal Case * High Efficiency to 93% * 4:1 Input Range * Regulated Outputs * 250KHz Switching Frequency * Continuous Short Circuit Protection * Input Under Voltage Protection * Over Temperature/Voltage/Current Protection * Remote On/Off * Full Load Operation up to 60 with Heat-sink M-C091 Natural Convention * No Tantalum Capacitor Inside * Safety Meets IEC/EN/UL 62368 -1 OUTPUT INPUT CURRENT MODEL INPUT OUTPUT % EFF. CAPACITOR CURRENT NUMBER VOLTAGE VOLTAGE LOAD MAX. MIN. MAX. NO LOAD FULL LOAD (4) (3) CHE100W-24S3V3 9-36 VDC 3.3 VDC 0 mA 25 A 200 mA 3.94 A 85.5 87 25000F CHE100W-24S05 9-36 VDC 5 VDC 0 mA 20 A 150 mA 4.66 A 88.5 89.5 20000F CHE100W-24S12 9-36 VDC 12 VDC 0 mA 8.4 A 200 mA 4.62 A 90 90.5 8400F CHE100W-24S15 9-36 VDC 15 VDC 0 mA 6.7 A 200 mA 4.62 A 89.5 90.5 6700F (2) CHE100W-24S24 9-36 VDC 24 VDC 0 mA 4.2 A 100 mA 4.76 A 88.5 89 4200uF (2) CHE100W-24S48 9-36 VDC 48 VDC 0 mA 2.1 A 100 mA 4.76 A 89.5 88.5 2100F CHE100W-48S3V3 18-75 VDC 3.3 VDC 0 mA 25 A 130 mA 1.96 A 87.5 88 25000F CHE100W-48S05 18-75 VDC 5 VDC 0 mA 20 A 130 mA 2.28 A 91.5 92 20000F CHE100W-48S12 18-75 VDC 12 VDC 0 mA 8.4 A 100 mA 2.26 A 92.5 93 8400F CHE100W-48S15 18-75 VDC 15 VDC 0 mA 6.7 A 100 mA 2.26 A 91.5 92.5 6700F (2) CHE100W-48S24 18-75 VDC 24 VDC 0 mA 4.2 A 100 mA 2.32 A 91 91 4200uF (2) CHE100W-48S48 18-75 VDC 48 VDC 0 mA 2.1 A 100 mA 2.32 A 91.5 90.5 2100F NOTE: 1. Nominal Input Voltage 24, 48 VDC. 2. Require a 10uF Aluminum Capacitor Connected Between +Vout and Vout for 24 & 48Vout Models. 3. Measured at Nominal Input Voltage. 4. Measured at 12VDC for 24SXX, 24VDC for 48SXX. 1 V13 SPECIFICATIONS All Specifications Typical at Nominal Line, Full Load, and 25 Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: Input Voltage Range ........................ 24V ................. 9-36V Efficiency .................................................................... See Table 48V 18-75V Isolation Voltage ............... Input/Output .......... 1500VDC min. Input Surge Voltage (100ms max.) ...... 24V ........ 50Vdc max. Input/Case, Output/Case ... 1500VDC min. 7 48V .. 100Vdc max. Isolation Resistance ..................................................... 10 Ohm min. Isolation Capacitance .. 1000pF typ. Under Voltage Lockout .... 24Vin power up ........ 8.8V Switching Frequency ................................................................ 250KHz typ. 24Vin power down ... 8.0V Positive Logic Remote On/Off (see note4&5) Operating Case Temperature ............................. -40 to 105 Input Filter ...... Pi Type Storage Temperature ........................ -55 to +105 OUTPUT SPECIFICATIONS: Thermal Shutdown Case Temperature .... 110 typ. Voltage Accuracy .................................................. 1.0% max. Humidity .................................................... 95% RH max. Non Condensing Transient Response: 25% Step Load Change .... <500s MTBF MIL-HDBK-217F, GB, 25 , Full Load . XXS05: 750Khrs typ. External Trim Adj. Range 10% Others: 880Khrs typ. Ripple & Noise, 20MHz BW Dimensions ......................... 2.282.40x0.50 inches (57.9x61.012.7 mm) 3.3V & 5V ..... 40mV RMS, 100mV pk-pk max. Case Material ........................... Aluminum with Non-Conducted Base 12V & 15V ........ 60mV RMS, 120mV pk-pk max. Weight .... 95g 24V .. 100mV RMS, 240mV pk-pk max. NOTE: 48V .. 200mV RMS, 480mV pk-pk max. 1. Measured from high line to low line. Temperature Coefficient ........................................ 0.03%/C max. 2. Measured from full load to zero load. 3. Output ripple and noise measured with 10uF tantalum and 1uF ceramic Short Circuit Protection .................................. Continuous capacitor across output. Line Regulation (note1) .................... 0.2% max. Load Regulation (note2) ............... 0.2% max. (24V&48V: 10uF aluminum and 1uF ceramic capacitor across output.) Over Voltage Protection Trip Range, % Vo Nom................. 115-140% 4. Logic compatibility ... open collector refer to -Vin Current Limit ..................... 110%-140% Nominal Output Module on .. >3.5VDC to 75VDC or open circuit Start up Time .. 10ms typ. Module off ..... 0 to < 1.2VDC 5. Suffix to the model number with negative logic remote on/off Module on ..... 0 to < 1.2VDC Module off .. >3.5VDC to 75VDC or open circuit CASE HB All Dimensions In Inches(mm) Typical Derating Curve Tolerances Inches: X.XX= 0.02 , X.XXX= 0.010 Millimeters: X.X= 0.5 , X.XX=0.25 120% 0.10 min 2.5 -40 60 Mounting Inserts 0.50 100% 12.7 M3*0.5 Through 4pl. BOTTOM VIEW 80% Pin Function 60% 1 +V Input 4 5 2 On/Off 40% with heatsink M-C091 3 CASE 3 6 20% 4 -V Input 7 105 5 -V Output 0% 2 8 6 -Sense Trim 7 -40 -20 0 20 40 60 80 100 120 1 9 8 +Sense o Ambient Temperature( C) +VOutput 9 0.48 1.90 12.3 48.3 2.28 57.9 REMOTE ON/OFF CONTROL EXTERNAL OUTPUT TRIM +SENSE (8) +SENSE (8) ON/OFF (2) TRIM DOWN 10K ohms TRIM (7) TRIM (7) HIGH SIGNAL HERE TRIMPOT DISABLE OUTPUT TRIM UP -VIN (4) -SENSE (6) -SENSE (6) 2 2.40 61.0 2.00 50.8 1.400 35.56 0.600 15.24 1.02 2.03 LOAD(%)