V11 CHASSIS MOUNT CQB100W-110S SERIES 100 WATT 4:1 INPUT DC-DC CONVERTERS FEATURES * 100W Isolated Output * Efficiency to 91% * Fixed Switching Frequency * 4:1 Input Range * Regulated Outputs * Remote On/Off * Low No Load Power Consumption * Over Temperature Protection * Over Voltage/Current Protection * Continuous Short Circuit Protection * Build-In EMI Filter * Fire & Smoke Meets EN45545-2 * Shock & Vibration Meets EN50155 (EN61373) * Safety Meets IEC/EN/UL 62368-1 nd * UL60950-1 2 (Basic Insulation) Approval for DC Modules * EN50155:2007 for EMC, Environmental and Characteristic OUTPUT CURRENT INPUT CURRENT % MODEL INPUT OUTPUT CAPACITOR LOAD MAX. NUMBER VOLTAGE VOLTAGE MIN. MAX. NO LOAD FULL LOAD EFF. CQB100W-110S05-CMFC 43-160 VDC 5 VDC 0 mA 20.0 A 15 mA 1.03A 89 20000F CQB100W-110S05-CMFD CQB100W-110S12 -CMFC 43-160 VDC 12 VDC 0 mA 15 mA 91 8400F 8.4 A 1.01A CQB100W-110S12 -CMFD CQB100W-110S15-CMFC 43-160 VDC 15 VDC 0 mA 6.7 A 15 mA 1.01A 91 6700F CQB100W-110S15-CMFD CQB100W-110S24 -CMFC 43-160 VDC 24 VDC 0 mA 15 mA 88 4200F 4.2 A 1.04A CQB100W-110S24-CMFD CQB100W-110S28-CMFC 43-160 VDC 28 VDC 0 mA 3.6 A 15 mA 1.04A 88 3600F CQB100W-110S28 -CMFD CQB100W-110S48 -CMFC 43-160 VDC 48 VDC 0 mA 2.1 A 15 mA 1.02A 89.5 1000F CQB100W-110S48-CMFD NOTE: 1. Nominal Input Voltage 110VDC 2. = N or None. 3. VR1 is Used for Output Voltage Adjustment. 4. Refer to Application Note for Thermal Resistance and Derating Informations. 5. TVS is Included for Input Surge Voltage Protection. 6. Recommend an External Fuse for Input Reverse Polarity Protection (Shunt Diode is Included Inside). 1 V11 SPECIFICATIONS All Specifications Typical at Nominal Line, Full Load, and 25 Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: Input Voltage Range ........................ 110V ........... 43-160V Efficiency ................................................................... See Table Input Surge Voltage (100ms max.) ...... 110V..... 200Vdc max. Isolation Voltage Under Voltage Lockout ....... 110Vin Power Up .... 41.5V Input/Output .......... 3000VDC min. 110Vin Power Down ... 38.5V Input/Case ................... 2250VDC min. Positive Logic Remote On/Off (see note 4&5) Output/Case .... 500VAC min. 8 Isolation Resistance .......................................................... 10 Ohm min. OUTPUT SPECIFICATIONS: Voltage Accuracy .................................................... 1.0% max. Isolation Capacitance(DC Module) ........... 1500pF typ. Switching Frequency .................................................................. 300KHz typ. Transient Response: 25% Step Load Change .... <250usec Trim Adj. Range (By VR1) .15V..+10%,-20% Operating Case Temperature ........ -40 to +100 Others.....10% Storage Temperature .............................. -40 to +105 Thermal Shutdown, Case Temperature(DC Module) .... 110 typ. Ripple & Noise, 20MHz BW 5V ......40mV RMS, 60mV pk-pk max. Humidity ........................................................ 95% RH max. Non Condensing 12V/15V ........40mV RMS, 100mV pk-pk max. 24V&28V ........... 100mV RMS, 200mV pk-pk max. MTBF MIL-HDBK-217F, GB, 25, Full Load .611 Khrs typ. 48V ...... 150mV RMS, 300mV pk-pk max. Safety ..... Meets UL62368-1 Temperature Coefficient ..................................... 0.02%/C max. EMC ....... Meets EN50155(EN50121-3-2:2008) Short Circuit Protection .................................. Continuous with External Output Filter Meets EN50155(EN50121-3-2:2015) Line Regulation (note1) ....................... 0.2% max. Shock/Vibration ... Meets EN50155(EN61373) Load Regulation (note2) ... 5V ........ 0.5% max. Environmental ............... EN50155(EN60068-2-1,2,30) Case Material . -CMFC .............................. Aluminum Base Others .... 0.2% max. Over Voltage Protection Trip Range, % Vo nom................. 115-140% -CMFD .. Aluminum Base and Aluminum Cover Current Limit .............................. 110%-160% Nominal Output Dimensions ........ -CMFC ..... 4.60x2.40x1.26 Inches (116.8x61.0x32.0 mm) Start up Time .... 100ms typ. -CMFD ..... 4.60x2.49x1.35 Inches (116.863.434.2 mm) Hold up Time . See Application Note Weight .... -CMFC ..215g -CMFD .300g NOTE: 1. Measured from high line to low line. 2. Measured from full load to zero load. 3. Output ripple and noise measured with 1uF ceramic capacitor across output. 4. Logic Compatibility ........................ open collector ref to -input Module on .... >3.5Vdc to 160Vdc or open circuit Module off ........ 0 to< 1.2Vdc 5. Suffix to the model number with negative logic remote on/off Module on ....... 0 to< 1.2Vdc Module off .. >3.5Vdc to 160Vdc or open circuit 6. Output connector CN3 wafer with TAIWAN KING PIN TERMINAL P110I series and mate with JST housing PH series or equivalent. 7. CN1 & CN2 connection: DINKLE EK500V-04P series or equivalent, 2 suitable electric wire: 24~12AWG( IEC 0.5~2.5mm ). Case Dimensions: All Dimensions In Inches (mm) Tolerance Inches: X.XX=0.02, X.XXX=0.010 Millimeters: X.X=0.5, X.XX=0.25 CMFC CMFD with Cover 4.60 116.8 4.60 116.8 4.200 106.68 4.200 106.68 CN1&CN2 0.200 5.08 0.200 5.08 PIN CONNECTION Pin Function 1 +V Input 2 -V Input VR1 VR1 3 Remote 4 Case 1 5 1 5 CN1 CN2 CN1 CN2 6 +V Output 2 6 2 5 7 3 7 3 6 +V Output 4 8 4 8 7 -V Output CN3 CN3 8 -V Output CN3 PIN CONNECTION Pin Function 1 2 3 4 2 3 4 1 -V Output 1 2 -Sense 3 +Sense CN3 4 +V Output CN3 2 1.26 32.0 0.523 13.30 0.200 5.08 2.000 50.80 2.40 61.0 1.35 34.2 0.523 13.30 0.248 6.31 2.000 50.80 2.49 63.4