V11 CQB100W-110S SERIES 100 WATT 4:1 INPUT DC-DC CONVERTERS SINGLE OUTPUT FEATURES * 100W Isolated Output * Efficiency up to 92% * Fixed Switching Frequency * 4:1 Input Range * Regulated Outputs * Remote On/Off * Low No Load Power Consumption * Over Temperature Protection * Over Voltage/Current Protection * Continuous Short Circuit Protection * Quarter Brick Size Meet Industrial Standard nd * UL60950-1 2 (Basic Insulation) Approval(Except 15Vout) * CB Test Certificate IEC60950-1 (Except 15Vout) * Meets EN50155 with External Circuits * Shock & Vibration Meets EN50155 (EN61373) * Fire & Smoke Meets EN45545-2 * 3000m Operating Altitude OUTPUT CURRENT INPUT CURRENT MODEL INPUT OUTPUT CAPACITIVE % EFF. NUMBER VOLTAGE VOLTAGE MIN. MAX. NO LOAD FULL LOAD LOAD MAX. CQB100W-110S05 43-160 VDC 5.0 VDC 0 mA 20 A 10 mA 1.00A 91 20000F CQB100W-110S12 43-160 VDC 12 VDC 0 mA 8.4 A 10 mA 1.00A 92 8400F CQB100W-110S15 43-160 VDC 15 VDC 0 mA 6.7 A 10 mA 1.00A 91 6700F CQB100W-110S24 43-160 VDC 24 VDC 0 mA 4.2 A 10 mA 1.03A 89 4200F CQB100W-110S28 43-160 VDC 28 VDC 0 mA 3.6 A 10 mA 1.04A 88.5 3600F CQB100W-110S48 43-160 VDC 48 VDC 0 mA 2.1 A 10 mA 1.02A 90 1000F NOTE: 1. Nominal Input Voltage 110VDC 2. An External Input Capacitor 220uF for All Models are Recommended to Reduce Input Ripple Voltage. 1 V11 SPECIFICATIONS All Specifications Typical At Nominal Line, Full Load, and 25 Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: Input Voltage Range ........................ 110V ........... 43-160V Efficiency ......................................................................... See Table Input Surge Voltage (100ms max.) ...... 110V..... 200Vdc max. Isolation Voltage Under voltage lockout .... 110Vin Power Up ... 41.5V Input/Output .......................................... 3000VDC min. 110Vin Power Down ..... 38V Input/Case..... 2250VDC min. Positive Logic Remote On/Off (note 4&5) Output/Case . 500VAC min. 8 Input Filter (note 7)..... Pi Type Isolation Resistance .......................................................... 10 Ohm min. Isolation Capacitance ........ 1500pF typ. OUTPUT SPECIFICATIONS: Voltage Accuracy ................................................ 1.0% max. Switching Frequency .................................................................. 300KHz typ. Transient Response: 75%-100% Step Load Change Operating Case Temperature ..... -40 to +105 Storage Temperature ..........................-55 to +125 Error Band . 5% Vout Nominal, Recovery Time ... <250us External Trim Adj. Range 10% Thermal Shutdown, Case Temperature ..... 110 typ. 15Vout +10%, -20% Humidity .................................................... 95% RH max. Non condensing MTBF MIL-HDBK-217F, GB, 25, Full Load 5V/12V ...... 720Khrs typ. Ripple & Noise, 20MHz BW (note 3) 5V .................. 40mV RMS, 100mV pk-pk max. Others .... 840Khrs typ. 12V/15V .................... 60mV RMS, 150mV pk-pk max. Dimensions ......................... 2.281.45x0.50 Inches (57.9x36.812.7 mm) nd 24V&28V.... 100mV RMS, 280mV pk-pk max. Safety ... UL60950-1 2 (Basic Insulation) 48V .... 200mV RMS, 480mV pk-pk max. EMC (note 8) EN50155(EN50121-3-2) with External Filter Temperature Coefficient .................................. 0.02%/ C max. Shock/Vibration ..EN50155(EN61373) Short Circuit Protection .................................. Continuous Environmental ... EN50155(EN60068-2-1) Line Regulation (note 1) .................... 0.2% max. Case Material ............................ Aluminum Base Plate with Plastic Case Weight .. 68g Load Regulation (note 2) ............... 0.2% max. Over Voltage Protection trip Range, % Vo nom................... 115-140% NOTE: Current Limit ..................... 110%-160% Nominal Output 1. Measured from high line to low line. 2. Measured from full load to zero load. Start up Time .. 60ms typ. 3. Output ripple and noise measured with 10uF aluminum and 1uF ceramic capacitor across output for 48Vout and with 10uF tantalum and 1uF ceramic capacitor for others. 4. Logic compatibility ........................ open collector ref to -Input Module on .... >3.5Vdc to 160Vdc or open circuit Module off ......... 0 to < 1.2Vdc 5. Suffix to the model number with negative logic remote on/off Module on ......... 0 to < 1.2Vdc Module off ... >3.5Vdc to 160Vdc or open circuit 6. Suffix -C to the model number with clear mounting insert (3.2mm DIA.). 7. An external input capacitor 220uF for all models are recommended to reduce input ripple voltage. 8. For information about EN50155 and RIA12, refer to application note. All Dimensions In Inches(mm) Tolerances Inches: X.XX= 0.02 , X.XXX= 0.010 REMOTE ON/OFF CONTROL Millimeters: X.X= 0.5 , X.XX=0.25 Mounting Inserts 2.28 57.9 M3*0.5 Through 2pl. 2.000 50.80 0.14 3.6 BOTTOM VIEW 4 3 5 6 2 7 EXTERNAL OUTPUT TRIM 8 1 PIN CONNECTION 0.21 5.4 PIN Function 1.86 47.2 1 +V Input 2 On/Off 3 -V Input 4 -V Output -Sense 5 Trim 6 +Sense 7 +V Output 8 2 1.45 36.8 1.030 26.15 0.600 15.24 0.300 7.62 0.150 3.81 0.16 4.1 min 0.300 7.62 0.50 12.7 0.600 15.24