V10 CQB150-300S SERIES 150 WATT 2:1 INPUT DC-DC CONVERTERS SINGLE OUTPUT FEATURES * 150W Isolated Output * Efficiency to 89% * Fixed Switching Frequency * Regulated Outputs * Remote On/Off * Low No Load Power Consumption * Over Temperature Protection * Over Voltage/Current Protection * Continuous Short Circuit Protection * Quarter Brick Size meet industrial standard * CE Mark Meets 2014/30/EU nd * UL60950-1 2 (Reinforced Insulation) Approval OUTPUT CURRENT INPUT CURRENT MODEL INPUT OUTPUT CAPACITOR % EFF. NUMBER VOLTAGE VOLTAGE LOAD MAX. MIN. MAX. NO LOAD FULL LOAD CQB150-300S05 180-425 VDC 5 VDC 0 mA 30 A 10 mA 580 mA 86 10000F CQB150-300S12 180-425 VDC 12 VDC 0 mA 12.5 A 10 mA 560 mA 89 8800F CQB150-300S15 180-425 VDC 15 VDC 0 mA 10 A 10 mA 560 mA 89 8800F CQB150-300S24 180-425 VDC 24 VDC 0 mA 6.3 A 10 mA 570 mA 88.5 3300F 570 mA CQB150-300S28 180-425 VDC 28 VDC 0 mA 5.4 A 10 mA 88.5 3300F 570 mA CQB150-300S48 180-425 VDC 48 VDC 0 mA 3.2 A 10 mA 89 1000F NOTE: 1. Nominal Input Voltage 300 VDC. 2. Require a Ceramic Capacitor 2200pF Connected Between Vin to Case for All Models. 3. An External Input Capacitor 180uF for All Models are Recommended to Reduce Input Ripple Voltage. 4. Measure at Nominal Input Voltage. 1 V10 SPECIFICATIONS All Specifications Typical At Nominal Line, Full Load, and 25 Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: Input Voltage Range .................... 300V ................. 180-425V Efficiency .................................................................... See Table Input over voltage protection .... Module On .........440V typ. Isolation Voltage ..................... Input/Output ........ 3000VAC min. Module Off ... 450V typ. Input/Case .... 2500VAC min. Under voltage lockout 300Vin Power Up ..... 170V Output/Case .. 500VAC min. 8 300Vin Power Down . 160V Isolation Resistance ........................................................ 10 ohm min. Positive Logic Remote On/Off (see note 4&5) Switching Frequency ......................................................... 360KHz typ. Input Filter ...... PI Type Operating Case Temperature .......... -40 to +105C Storage Temperature .......................... -55 to +105C OUTPUT SPECIFICATIONS: Thermal Shutdown, Case Temperature .... 110 typ. Voltage Accuracy ................................................ 1.0% max. Transient Response: 25% Step Load Change ... <250us Humidity ........................................................ 95% RH max. Non condensing External Trim Adj. Range .. +10%, -20% MTBF MIL-HDBK-217F, GB, 25, Full Load 48V ...... 1000Khrs typ. Ripple & Noise, 20MHz BW(note3) Others ...800Khrs typ. 5V ..................... 60mV RMS, 100mV pk-pk, max. Dimensions ......................... 2.281.45x0.50 inches (57.9x36.812.7 mm) 12V&15V ............. 60mV RMS, 150mV pk-pk max. Case Material ............................ Aluminum Base Plate with Plastic Case 24V&28V .. 100mV RMS, 280mV pk-pk max. Weight .... 65g 48V ... 200mV RMS, 480mV pk-pk max. NOTE: Temperature Coefficient ...................................... 0.02%/C max. 1. Measured from high line to low line. Short Circuit Protection ..................................... Continuous 2. Measured from full load to zero load. 3. Output ripple and noise measured with 10uF aluminum and 1uF ceramic Line Regulation (note1) ..................... 0.2% max. capacitor across output for 48Vout and with 10uF tantalum and 1Uf Load Regulation (note2) ................ 0.2% max. Over Voltage Protection trip Range, % Vo nom................. 115-140% ceramic capacitor for others. Current Limit ....................... 110%-160% Nominal Output 4. Logic compatibility ........................ open collector ref to -Input Start up time .... 280ms typ. Module on .... >3.5Vdc to 75Vdc or open circuit Module off ......0 to< 1.2Vdc 5. Suffix to the model number with negative logic remote on/off Module on ....0 to< 1.2Vdc Module off .. >3.5Vdc to 75Vdc or open circuit 6. Suffix -C to the model number with clear mounting insert (3.2mm DIA.). 7. An external input capacitor 180uF for all models are recommended to reduce input ripple voltage. 8. Require a disc ceramic capacitor 2200pF (type KX Class X1 Y1 series Murata) connected between vin to case for all models. All Dimensions in Inches(mm) REMOTE ON/OFF CONTROL Tolerance Inches:x.xx=0.02 ,x.xxx=0.010 Millimeters:x.x=0.5 , x.xx=0.25 ON/OFF (2) 2.28(57.9) 1.957(49.70) 0.16(4.1) Mounting lnserts HIGH SIGNAL HERE PIN CONNECTION M3*0.5 Through 2pl. DISABLE OUTPUT BOTTOM VIEW PIN Function -VIN (4) 1 +V Input 3 4 2 2 On/Off 5 6 -V Input 3 EXTERNAL OUTPUT TRIM 1 7 4 -V Output 8 -Sense 5 Trim 6 0.21(5.4) 1.86(47.2) +Sense 7 8 +V Output 2 0.150(3.81) 0.375(9.53) 0.125(3.18) 0.50(12.7) 0.60(15.2) 0.16(4.1) min. 0.42(10.8) 0.300(7.62) 0.600(15.24) 0.21(5.3) 1.03(26.2) 1.45(36.8)