V10 CHASSIS MOUNT CQB150W-110S SERIES 150 WATT 4:1 INPUT DC-DC CONVERTERS FEATURES * 150W Isolated Output * Efficiency to 91% * Fixed Switching Frequency * 4:1 Input Range * Regulated Outputs * Remote On/Off * Low No Load Power Consumption * Over Temperature Protection * Over Voltage/Current Protection * Continuous Short Circuit Protection * Shock & Viberation Meets EN50155 (EN61373) * Safety Meets UL60950-1, EN60950-1 and IEC60950-1 nd * UL60950-1 2 (Basic Insulation) Approval for DC Modules * EN50155:2007 for EMC, Environmental and Characteristic * Build-In EMI Filter * Fire & Smoke Meets EN45545-2 OUTPUT CURRENT INPUT CURRENT % MODEL INPUT OUTPUT CAPACITOR LOAD MAX. NUMBER VOLTAGE VOLTAGE EFF. MIN. MAX. NO LOAD FULL LOAD CQB150W-110S05 -CMFC 43-160 VDC 5 VDC 0 mA 30.0 A 15 mA 1.53 A 89 30000F CQB150W-110S05-CMFD CQB150W-110S12-CMFC 43-160 VDC 12 VDC 0 mA 12.5 A 15 mA 1.50 A 91 12500F CQB150W-110S12-CMFD CQB150W-110S24 -CMFC 43-160 VDC 24 VDC 0 mA 6.3 A 15 mA 1.56 A 88 6300F CQB150W-110S24-CMFD CQB150W-110S28-CMFC 43-160 VDC 28 VDC 0 mA 5.4 A 15 mA 1.56 A 88 5400F CQB150W-110S28 -CMFD CQB150W-110S48-CMFC 43-160 VDC 48 VDC 0 mA 3.2 A 15 mA 1.56 A 89.5 1000F CQB150W-110S48-CMFD NOTE: 1. Nominal Input Voltage 110VDC 2. = N or None. 3. VR1 is used for Output Voltage Adjustment. 4. Refer to application note for thermal resistance and derating informations. 5. TVS is included for input surge voltage protection. 6. Recommend an external fuse for input reverse polarity protection (shunt diode is included inside). 1 V10 SPECIFICATIONS All Specifications Typical at Nominal Line, Full Load, and 25 Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: Input Voltage Range ........................ 110V ........... 43-160V Efficiency ................................................................... See Table Input Surge Voltage (100ms max.) ...... 110V..... 200Vdc max. Isolation Voltage Under voltage lockout ....... 110Vin power up .... 41.5V Input/Output .......... 3000VDC min. 110Vin power down ... 38.5V Input/Case ................ 2250VDC min. Positive Logic Remote On/Off (see note 4&5) Output/Case .... 500VAC min. 8 Isolation Resistance ........................................................... 10 ohm min. OUTPUT SPECIFICATIONS: Isolation Capacitance(DC Module) ........... 1500pF typ. Voltage Accuracy .................................................... 1.0% max. Transient Response: 25% Step Load Change .... <250usec Switching Frequency .................................................................. 300KHz typ. Trim Adj. Range (By VR1) 10% Operating Case Temperature ...... -40 to +100 Ripple & Noise, 20MHz BW Storage Temperature .............................. -40 to +105 5V&12V ................... 40mV RMS, 100mV pk-pk max. Thermal Shutdown, Case Temperature(DC Module) .... 110 typ. 24V&28V ........... 100mV RMS, 200mV pk-pk max. Humidity ........................................................ 95% RH max. Non Condensing 48V ...... 150mV RMS, 300mV pk-pk max. MTBF MIL-HDBK-217F, GB, 25, Full Load .. 600Khrs typ. Temperature Coefficient ..................................... 0.02%/C max. Safety ..... Meets UL60950-1 Short Circuit Protection .................................. Continuous EMC ....... Meets EN50155(EN50121-3-2:2008) Line Regulation (note1) ....................... 0.2% max. with External Output Filter Meets EN50155(EN50121-3-2:2015) Load Regulation (note2) . 5V ........ 0.5% max. Shock/Vibration ... Meets EN50155(EN61373) Environmental ............... EN50155(EN60068-2-1,2,30) Others .... 0.2% max. Over Voltage Protection Trip Range, % Vo nom................. 115-140% Case Material . -CMFC .............................. Aluminum Base Current Limit ............................. 110% ~160% Nominal Output -CMFD .. Aluminum Base and Aluminum Cover Start up Time .... 100ms typ. Dimensions ........ -CMFC ..... 4.60x2.40x1.26 inches (116.8x61.0x32.0 mm) Hold up Time . See Application Note -CMFD ..... 4.60x2.49x1.35 Inches (116.863.434.2 mm) Weight .... -CMFC ..215g NOTE: 1. Measured from high line to low line. -CMFD .300g 2. Measured from full load to zero load. 3. Output ripple and noise measured with 1uF ceramic capacitor across output. 4. Logic Compatibility ........................ open collector ref to -input Module on .... >3.5Vdc to 160Vdc or open circuit Module off ........ 0 to< 1.2Vdc 5. Suffix to the model number with negative logic remote on/off Module on ....... 0 to< 1.2Vdc Module off .. >3.5Vdc to 160Vdc or open circuit 6. Output connector CN3 wafer with TAIWAN KING PIN TERMINAL P110I series and mate with JST housing PH series or equivalent. 7. CN1 & CN2 connection: DINKLE EK500V-04P series or equivalent, 2 suitable electric wire: 24~12AWG( IEC 0.5~2.5mm ). Case Dimensions: All Dimensions In Inches (mm) Tolerance Inches: X.XX=0.02, X.XXX=0.010 Millimeters: X.X=0.5, X.XX=0.25 CMFC CMFD with Cover 4.60 116.8 4.60 116.8 4.200 106.68 4.200 106.68 CN1&CN2 0.200 5.08 0.200 5.08 PIN CONNECTION Pin Function 1 +V Input 2 -V Input VR1 VR1 3 Remote 4 Case 5 1 5 1 CN2 CN1 CN2 CN1 2 6 5 +V Output 2 6 7 3 7 3 6 +V Output 8 4 8 4 7 -V Output CN3 CN3 8 -V Output CN3 PIN CONNECTION Pin Function 1 2 3 4 2 3 4 1 -V Output 1 2 -Sense 3 +Sense CN3 CN3 4 +V Output 2 1.26 32.0 0.523 13.30 0.200 5.08 2.000 50.80 2.40 61.0 1.35 34.2 0.523 13.30 0.248 6.31 2.000 50.80 2.49 63.4