V12 CQB150W-110S SERIES 150 WATT 4:1 INPUT DC-DC CONVERTERS SINGLE OUTPUT FEATURES * 150W Isolated Output * Efficiency to 92% * Fixed Switching Frequency * 4:1 Input Range * Regulated Outputs * Remote On/Off * Low No Load Power Consumption * Over Temperature Protection * Over Voltage/Current Protection * Continuous Short Circuit Protection * Quarter Brick Size Meet Industrial Standard * CE Mark Meets 2014/30/EU nd * UL60950-1 2 (Basic Insulation) Approval * CB Test Certificate IEC60950-1 * Meets EN50155 with External Circuits * Shock & Vibration Meets EN50155 (EN61373) * Fire & Smoke Meets EN45545-2 * 3000m Operating Altitude MODEL INPUT OUTPUT OUTPUT CURRENT INPUT CURRENT CAPACITIVE % EFF. NUMBER VOLTAGE VOLTAGE LOAD MAX. MIN. MAX. NO LOAD FULL LOAD 43-160 VDC 5.0 VDC 0 mA 30 A 10mA 91 30000F CQB150W-110S05 1.50A CQB150W-110S12 43-160 VDC 12 VDC 0 mA 12.5 A 10mA 1.48A 92 12500F CQB150W-110S24 43-160 VDC 24 VDC 0 mA 6.3 A 10mA 1.54A 89 6300F CQB150W-110S28 43-160 VDC 28 VDC 0 mA 5.4 A 10mA 1.54A 89 5400F CQB150W-110S48 43-160 VDC 48 VDC 0 mA 3.2 A 10mA 1.54A 90.5 1000F NOTE: 1. Nominal Input Voltage 110VDC 1 V12 SPECIFICATIONS All Specifications Typical At Nominal Line, Full Load, and 25 Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: Input Voltage Range ........................ 110V ........... 43-160V Efficiency ......................................................................... See Table Input Surge Voltage (100ms max.) ...... 110V..... 200Vdc max. Isolation Voltage Under voltage lockout .... 110Vin power up ... 41.5V Input/Output .......................................... 3000VDC min. 110Vin power down ...... 38V Input/Case..... 2250VDC min. Positive Logic Remote On/Off (see note 4 & 5) Output/Case . 500VAC min. 8 Input Filter ...... PI Type Isolation Resistance ........................................... 10 ohm min. Isolation Capacitance ........ 1500pF typ. OUTPUT SPECIFICATIONS: Voltage Accuracy ................................................ 1.0% max. Switching Frequency .................................................................. 300KHz typ. Transient Response: 25% Step Load Change ... <250us Operating Case Temperature ....... -40 to +105 External Trim Adj. Range 10% Storage Temperature ..........................-55 to +125 Ripple & Noise, 20MHz BW (note3) Thermal Shutdown, Case Temperature ..... 110 typ. 5V .................. 40mV RMS, 100mV pk-pk max. Humidity .................................................... 95% RH max. Non condensing 12V .................... 60mV RMS, 150mV pk-pk max. MTBF MIL-HDBK-217F, GB, 25, Full Load 5V/12V ...... 720Khrs typ. 24V&28V.... 100mV RMS, 280mV pk-pk max. Others .840Khrs typ. 48V .... 200mV RMS, 480mV pk-pk max. Dimensions ......................... 2.281.45x0.50 inches (57.9x36.812.7 mm) nd Temperature Coefficient .................................. 0.02%/C max. Safety ... UL60950-1 2 (Basic Insulation) Short Circuit Protection .................................. Continuous EMC (note8) EN50155(EN50121-3-2) with External Filter Line Regulation (note1) .................... 0.2% max. Shock/Vibration ..EN50155(EN61373) Load Regulation (note2) ............... 0.2% max. Environmental ... EN50155(EN60068-2-1) Over Voltage Protection trip Range, % Vo nom................... 115-140% Case Material ............................ Aluminum Base Plate with Plastic Case Current Limit ..................... 110%-160% Nominal Output Weight .. 68g Start up Time .. 60ms typ. NOTE: 1. Measured from high line to low line. 2. Measured from full load to zero load. 3. Output ripple and noise measured with 10uF aluminum and 1uF ceramic capacitor across output for 48Vout and with 10uF tantalum and 1uF ceramic capacitor for others. 4. Logic compatibility ........................ open collector ref to -Input Module on .... >3.5Vdc to 160Vdc or open circuit Module off ......... 0 to < 1.2Vdc 5. Suffix to the model number with negative logic remote on/off Module on ......... 0 to < 1.2Vdc Module off ... >3.5Vdc to 160Vdc or open circuit 6. Suffix -C to the model number with clear mounting insert (3.2mm DIA.). 7. An external input capacitor 220uF for all models are recommended to reduce input ripple voltage. 8. For information about EN50155 and RIA12, refer to application note. All Dimensions In Inches(mm) Tolerances Inches: X.XX= 0.02 , X.XXX= 0.010 REMOTE ON/OFF CONTROL Millimeters: X.X= 0.5 , X.XX=0.25 Mounting Inserts 2.28 57.9 M3*0.5 Through 2pl. 2.000 50.80 0.14 3.6 BOTTOM VIEW 4 3 5 6 2 EXTERNAL OUTPUT TRIM 7 1 8 PIN CONNECTION 0.21 5.4 PIN Function 1.86 47.2 1 +V Input 2 On/Off -V Input 3 -V Output 4 5 -Sense 6 Trim 7 +Sense +V Output 8 2 1.45 36.8 1.030 26.15 0.600 15.24 0.300 7.62 0.150 3.81 0.16 4.1 min 0.300 7.62 0.50 12.7 0.600 15.24