CQB75W-24S05 Cincon

V15 CQB75W SERIES 75 WATT 4:1 INPUT DC-DC CONVERTERS SINGLE OUTPUT FEATURES * 75W Isolated Output * Efficiency to 87% * Fixed Switching Frequency * 4:1 Input Range * Regulated Outputs * Continuous Short Circuit Protection * Industry Standard Quarter-Brick Package * CE Mark Meets 2014/30/EU nd * UL60950-1 2 Approval MODEL INPUT OUTPUT OUTPUT CURRENT INPUT CURRENT CAPACITOR % EFF. NUMBER VOLTAGE VOLTAGE LOAD MAX. MIN. MAX. NO LOAD FULL LOAD CQB75W-24S3V3 9-36 VDC 3.3 VDC 0 mA 12 A 50 mA 2037 mA 81 12000uF 9-36 VDC 5.0 VDC 0 mA 12 A 50 mA 2976 mA 84 12000uF CQB75W-24S05 CQB75W-24S12 9-36 VDC 12 VDC 0 mA 6.25 A 50 mA 3634 mA 86 6250uF 9-36 VDC 15 VDC 0 mA 5 A 50 mA 3634 mA 86 4400uF CQB75W-24S15 CQB75W-24S24 9-36 VDC 24 VDC 0 mA 3.12 A 50 mA 3628 mA 86 1500uF CQB75W-48S3V3 18-75 VDC 3.3 VDC 0 mA 12 A 30 mA 1006 mA 82 12000uF CQB75W-48S05 18-75 VDC 5.0 VDC 0 mA 12 A 30 mA 1471 mA 85 12000uF CQB75W-48S12 18-75 VDC 12 VDC 0 mA 6.25 A 30 mA 1817 mA 86 6250uF 18-75 VDC 15 VDC 0 mA 5 A 30 mA 1796 mA 87 4400uF CQB75W-48S15 CQB75W-48S24 18-75 VDC 24 VDC 0 mA 3.12 A 30 mA 1796 mA 87 1500uF NOTE: 1. Nominal Input Voltage 24, 48VDC 1 V15 SPECIFICATIONS All Specifications Typical At Nominal Line, Full Load, and 25 Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: Input Voltage Range....................... 24V................... 9-36V Efficiency .................................................................... See Table 48V ............... 18-75V Isolation Voltage ..................... Input/Output ....... 1500VDC min. Input Surge Voltage (100ms max.) .. 24V ............ 50Vdc max. Input/Case ......1500VDC min. 48V .............. 100Vdc max. Output/Case .. 1500VDC min. 7 Under voltage lockout .... 24Vin power up .... 8.8V Isolation Resistance ....................................................... 10 ohm min. 24Vin power down ... 8.0V Isolation Capacitance ..... 1000pF typ. Switching Frequency .............................. 300KHz typ. 48Vin power up .. 17V 48Vin power down ....... 16V Operating Case Temperature ................. -40 to 100 Positive Logic Remote On/Off (note 4&5) Storage Temperature ........................... -55 to +105 Input Filter ...... PI Type Humidity ........................................................ 95% RH max. Non condensing MTBF . MIL-HDBK-217F, GB, 25, Full Load .. 850Khrs typ. OUTPUT SPECIFICATIONS: Thermal Shutdown, Case Temp.. 105 typ. Voltage Accuracy: .................................................. 1.5% max. Transient Response :75% to 100% Step Load Change Dimensions ............. 1.45 x 2.28 x 0.50 inches(36.8 x 57.9 x 12.7 mm) Error Band 5% Vout Case Material ............................. Aluminum Base-plate with Plastic Case Recover Time <500us Weight ... 63g External Trim Adj. Range .........................10% NOTE : Ripple & Noise, 20MHz BW(note3) 1. Measured from high line to low line. 3.3V & 5V .... 40mV RMS, max. 2. Measured from full load to zero load. 100mV pk-pk, max. 3. Output ripple and noise measured with 10uF tantalum and 1uF ceramic capacitor across output. 12V & 15V ... 60mV RMS, max. 150mV pk-pk, max. 4. Logic Compatibility ..... Open Collector ref. to -Input 24V .... 100mV RMS, max. Module on ... >3.5Vdc to 75Vdc or Open Circuit 240mV pk-pk, max. Module off ... 0 to < 1.8Vdc Temperature Coefficient ................................... 0.03%/C max. 5. Suffix to the model number with negative logic remote on/off Short Circuit Protection .................................. Continuous Module on .. 0 to < 1.8Vdc Module off .... >3.5Vdc to 75Vdc or open circuit Line Regulation (note1) ..................... 0.2% max. Load Regulation (note2) .............. 0.2% max. 6. Suffix -C to the model number with clear mounting insert (3.1mm DIA.) Over Voltage Protection trip Range ,% Vo nom..................... 115-140% Current Limit ..................... 110%-140% Nominal Output Start up time ..... 20ms typ. CASE QB External Output Trim All Dimensions In Inches(mm) Tolerances Inches: X.XX= 0.02 , X.XXX= 0.010 Millimeters: X.X= 0.5 , X.XX=0.25 Mounting Inserts M3x0.5 Through 4pl. PIN CONNECTION Pin Function 4 3 +Vin 5 1 2 6 2 ON/OFF 7 1 8 -Vin 3 BOTTOM VIEW 4 -Vout 5 -Sense 6 Trim DIA 6PLACES DIA 2PLACES +Sense 7 +Vout 8 2 min.