V11 DLD SERIES 57 WATT BUCK LED DRIVER Features * LED Driver Current up to 1400mA * Constant Current Output * Digital PWM Dimming * Analog Dimming Control * High Efficiency up to 96% * Continuous Short Circuit Protection * DIP16 Package and Wired Version * High Reliability * IP67 Protection INPUT OUTPUT OUTPUT OUTPUT RIPPLE & %EFF. VOLTAGE MODEL OPERATING RATED RATED NOISE (Max.) (Typ.) RANGE VOLTAGE CURRENT POWER NOTE2 NOTE3 300 mVpp 96% 4.5-60 VDC 2-57 VDC 350 mA 20 W DLD-C035 500 mVpp 96% 4.5-60 VDC 2-57 VDC 700 mA 40 W DLD-C070 500 mVpp 96% 4.5-60 VDC 2-57 VDC 1000 mA 57 W DLD-C100 500 mVpp 96% 10-36 VDC 8-33 VDC 1400 mA 46.2 W DLD-C140 Note: 1. 3V< Vin - Vout <30Vdc, to keep current accuracy. Nominal Input Voltage: 48Vdc, 28Vdc (C140 models) 2. Ripple and Noise are measured at rated current, Nominal Input and 36Vdc or 24Vdc (C140 models) output and 20MHz bandwidth with a 0.1uF ceramic capacitor. 3. Measured at rated current, Nominal Input and 36Vdc or 24Vdc (C140 models) output. 4. Acceptable customer modifications. Dimming Controlled by Analog Voltage 5.0 5.0 4.0 4.0 3.0 3.0 2.0 2.0 1.25 1.0 1.0 10 50 100 10 50 100 Output Current (%) Output Current (%) DLD-C140 Others 1 Analog Voltage (V) Analog Voltage (V)V11 Specifications DLD Derating Curve All specifications are Typical at nominal line , full load and 25C unless otherwise noted INPUT SPECIFICATIONS: 120 Input Voltage ......... 1400mA/others ......... 10-36VDC/4.5-60Vdc 100 -40.0 60.0 Input Surge Voltage (1second) 1400mA/others ... 50Vdc/65Vdc max. Input Filter .. Capacitor 80 Under Voltage Lockout Power up . 8.0Vdc/4.0Vdc typ. Power down . 6.9Vdc/3.7Vdc typ. 60 OUTPUT SPECIFICATIONS: 60.0 350mA Constant Current Accuracy .... (note1) ....5% max. 40 700mA 1000mA Current Line Regulation .. (note2) ..... 5% max. 1400mA 20 Current Load Regulation .. (note3) ... 5% max. Short Circuit Protection .. Constant Current with Auto Recovery 60.0 0 Start up time ... 60ms max. -40 -20 0 20 40 60 80 100 GENERAL SPECIFICATIONS: Ambient Temperature( ) Efficiency .. See Table Temperature Coefficient ......................... 0.05%/ Isolation Voltage . Non-isolation PWM DIMMING: (leave open if not used) Switching Frequency 1400mA/Others .. 50-500KHz/ 300KHz typ. Input Voltage Range ... TTL Logic Compatibility 5Vdc typ. Operating Ambient Temperature ........... -40 ~ 85 see Derating Curve Threshold Voltage .. Module on >1.75Vdc, Module off <0.5Vdc Case Temperature ............................................................... 100 max. Switching Frequency ............................................................ 1KHz max. Cooling ... Natural Convection Output Current Range ...................................................... 10% to 100% Storage Temperature ..................... -55 ~ 125 Minimum On Time ..... 100ns Operating Humidity ....... 10%~95%RH non-condensing ANALOGUE DIMMING: (leave open if not used) Operating Altitude ... Sea Level to 3000m Control Voltage Range .. 1.25-5Vdc/1-5Vdc (DLD-C140) Vibration . 0~500Hz, 2G 60min./1cycle, period for 3hours, 3 axes Analogue Pin Drive Current . 0.4mA max. Shock .. 30g peak, half sine, 6 axes SAFETY AND EMISSIONS: MTBF, L-HDBK-217F (25) ... >1.6Mhrs EMI ............ EN55022/EN55015 Class B Dimensions ........ 1.28x0.66x0.40 Inches(32.5x16.8x10.2 mm) EMS ........................................... EN61547,EN61000-4-2,3,4,5,6 Weight .... 18g. NOTE: Case Material .. Plastic Case 1. 3V<Vin-Vout <30Vdc to keep current accuracy. 2. Current line regulation is measured from High Line to Low Line. 3. Current load regulation is measured from high to low operating voltage. 4. Acceptable customer modifications. Mechanical Specification NOTE:Pin Size is 0.020 Inch (0.5mm) DIA 0.05 All Dimensions In Inches(mm) Tolerance Inches:x.xx=0.02, x.xxx=0.010 Millimeters:x.x=0.5, x.xx=0.25 DLD-L DLD-LW 1.28 32.5 1.28 32.5 TOP View TOP View 0.020 0.50 11pl. DLD Connections DLD-CXXXLW Function DLD-CXXX 1&2 1(Black) -V Input 3 3(White) Analogue DIMming 0.09 2.28 1.100 27.94 4 4(Green) PWM/ON/OFF 11&12 12(Blue) -V Output 1 2 3 4 11 12 1 3 4 12 13(Yellow) +V Output 13&14 Bottom View Bottom View 22 22(Brown) Vref/NP 24(Red) +V Input 24 22 13 23&24 24 23 22 14 13 NP: No Pin for DLD-C140 0.100 2.54 0.500 12.70 0.40 10.1 0.100 2.54 0.15 3.8 0.66 16.8 52mm Load(%) 0.40 10.1 0.66 16.8 10010mm