V10 EC5SBW SERIES 30 WATT 4:1 INPUT DC-DC CONVERTERS FEATURES * 30W Isolated Output * 1x1x0.4 Shielded Metal Case * Very High Efficiency Up to 90% * Low No Load Power Consumption * 4:1 Input Range * Regulated Outputs * Fixed Switching Frequency * Input under-voltage Protection * Over Current Protection * Remote On/Off * Continuous Short Circuit Protection * Without Tantalum Capacitors inside * CE Mark Meets 2004/108/EC * Safety Meets UL60950-1, EN60950-1, and IEC60950-1 % Eff. MODEL INPUT OUTPUT OUTPUT CURRENT INPUT CURRENT CAPACITIVE LOAD MAX. (2) (3) NUMBER VOLTAGE VOLTAGE MIN. MAX. NO LOAD FULL LOAD EC5SBW-24S33 9-36 VDC 3.3 VDC 0 mA 7500 mA 10 mA 1172 mA 88 88 7500uF EC5SBW-24S05 9-36 VDC 5 VDC 0 mA 6000 mA 10 mA 1389 mA 89 90 6000uF EC5SBW-24S12 9-36 VDC 12 VDC 0 mA 2500 mA 10 mA 1404 mA 89 89 2500uF EC5SBW-24S15 9-36 VDC 15 VDC 0 mA 2000 mA 10 mA 1404 mA 89 89 2000uF 10 mA EC5SBW-24D12 9-36 VDC 0 mA 1404 mA 89 89 12 VDC 1250 mA 1250uF EC5SBW-24D15 9-36 VDC 0 mA 10 mA 1404 mA 89 89 15 VDC 1000 mA 1000uF EC5SBW-48S33 18-75 VDC 3.3 VDC 0 mA 7500 mA 8 mA 586 mA 88 88 7500uF EC5SBW-48S05 18-75 VDC 5 VDC 0 mA 6000 mA 8 mA 694 mA 90 90 6000uF EC5SBW-48S12 18-75 VDC 12 VDC 0 mA 2500 mA 8 mA 694 mA 90 90 2500uF EC5SBW-48S15 18-75 VDC 15 VDC 0 mA 2000 mA 8 mA 702 mA 90 89 2000uF 8 mA EC5SBW-48D12 18-75 VDC 0 mA 710 mA 89 88 12 VDC 1250 mA 1250uF 8 mA EC5SBW-48D15 18-75 VDC 15 VDC 0 mA 1000 mA 702 mA 90 89 1000uF NOTE: 1. Nominal Input Voltage 24 or 48 VDC 2. Measure at 12VDC for EC5SBW 24 Vin, 24VDC for EC5SBW 48 Vin 3. Measure at Nominal Input Voltage 1 V10 SPECIFICATIONS All Specifications Typical At Nominal Line, Full Load, and 25 Unless Otherwise Noted INPUT SPECIFICATIONS: GENERAL SPECIFICATIONS: Input Voltage Range .................... 24V ................... 9 36V Efficiency ......................................................... See Table 48V ...... 18 75V Isolation Voltage ............................................ 1500 VDC min. 9 Input Surge Voltage (100ms max.) .... 24V ........ 50Vdc max. Iso la ti o n Re s is ta n ce ....................... 10 Ohms min. 48V ......... 100Vdc max. Isolation Capacitance....1500pF typ. Under voltage lockout .. 24Vin power up ..... 8.8V typ. Switching Frequency .......................... Vo=3.3 & 5V ............ 270KHz typ. 24Vin power down ..... 8.0V typ. Others ..... 330KHz typ. 48Vin power up ..... 17V typ. Operating Ambient Temperature Range ........... -40 to +80 48Vin power down ...... 16V typ. Derating, Above 55 ..... Linearly to Zero Power at +105 Input Filter ... PI Type Case Temperature (note4) .... 105 Positive Logic Remote on/off Control: Cooling Natural Convection Logic Compatibility CMOS or Open Collector TTL, ref. to -Vin Storage Temperature Range .......................... -55 to +125 Module On >+3.5 to 75VDC or Open Circuit Thermal Shutdown, Case Temp. ....................... 110 typ. Module Off .. <1.2VDC Humidity .................................................. 95% RH max. Non condensing MTBF . MIL-STD-217F, GB, 25, Full Load T.B.D. hrs OUTPUT SPECIFICATIONS: Voltage Accuracy ........... 1.5% max. Dimensions ........... 1.00x1.00x0.40 inches (25.4x25.4x10.2mm) Case Material Black Coated Copper with Non-Conductive Base Voltage Balance (Dual) ... 1.5% max. Transient Response: 75% - 100% Step Load Change. Weight .. 18g Error Band 5% Vout nominal, Recovery Time ... < 250us NOTE: 1. Measured from high line to low line. Ripple & Noise, 20MHz BW(note3) 2. Measured from full load to min. load. Vo=3.3 & 5V ..... 75mVpk-pk max. 3. The output ripple and noise is measured with 10uF tantalum and 1uF Vo=12 & 15V ... 100mVpk-pk max. ceramic capacitor across output. Temperature Coefficient ............................. 0.03%/ max. 4. Suffix to the model number with negative logic remote on/off Short Circuit Protection ........................... Continuous Module on .... <1.2VDC Line Regulation (note1) .. Single .... 0.2% max. Module off .... >3.5VDC to 75VDC or open circuit Dual 0.5% max. 5. Maximum case temperature under any operating condition should not Load Regulation (note2) Single .... 0.2% max. be exceeded 105. Dual 1.0% max. Over Voltage Protection . Zener or TVS Clamp Typical Derating curve for Natural Convection External Trim Adj. Range (single output models only) .... 10% Current Limit . 110% - 170% Nominal Output 120% Start up time ...... 20ms max. -40 55 100% Natural 80% Convection SIZE SB Dimensions: 60% 40% 20% Tolerances Inches: X.XX= 0.04 , X.XXX= 0.010 105 Millimeters: X.X= 1.0 , X.XX=0.25 0% -40 -20 0 20 40 60 80 100 o Ambient Temperature( C) PIN CONNECTION DIP Function EXTERNAL OUTPUT TRIM Pin Single Dual +Vout +Vout +Input +Input 1 BOTTOM TRIM DOWN 2 -Input -Input VIEW 3 +V Output +V Output 10K Ohms TRIM TRIM TRIMPOT Trim Common 4 min. 5 -V Output -V Output TRIM UP 6 Remote Remote -Vout -Vout 2 DIA LOAD(%)