V12 LDM100S SERIES 100 WATT SINGLE OUTPUT AC-DC LED DRIVER Features * Universal Input 90~305VAC or 127-420Vdc * High Efficiency up to 90% * Meets EN55015, EN61000-3-2 Class C * Meets EN61347-1, EN61347-2-13 * Meets UL8750 * Active PFC Function * IP67 Design for Indoor or Outdoor Installations (note7) * Max. Output power 100W * Dimming function: 1~10Vdc and Resistance or DALI (Optional) * Protections: Short circuit, Over Current Over Voltage and Over Temperature * Constant Voltage and Constant Current * No Load Power Consumption<0.5W (note10) * 3 Years Warranty LDM100 Series Current Voltage Output Ripple Voltage Line Load Constant % EFF. Output Adj. Rang Adj. Rang Current (mV p-p) Accuracy Regulation Regulation Current (typ.) MODEL Voltage (Optional) (Optional) Note.6 Note.1 Note.2 Note.3 Note.4 Region Note.8 Note.5 Note.5 LDM100S120 12V 8.34A 120mV 1% 1% 2% 6.5V~12V 5.3A~8.34A 10.8V~13.2V 88% LDM100S240 24V 4.17A 120mV 1% 1% 2% 13V~24V 2.6A~4.17A 21.6V~26.4V 89% LDM100S360 36V 2.78A 120mV 1% 1% 2% 19V~36V 1.74A~2.78A 32.4V~39.6V 90% LDM100S480 48V 2.08A 120mV 1% 1% 2% 26V~48V 1.3A~2.08A 43.2V~52.8V 90% Ordering information Model No. Optional type LDM100SXXX -XX Optional type: 01: Constant Current Mode (IP67) 03A: Constant Current Mode (IP65) No dimming Dimming:1~10Vdc and Resistance No adjustment for output voltage and output current With adjustment for output voltage and output current 02: Constant Current Mode (IP65) 04: Constant Current Mode (IP67) No dimming Dimming: DALI With adjustment for output voltage and output current No adjustment for output voltage and output current 03: Constant Current Mode (IP67) 04A: Constant Current Mode (IP65) Dimming: 1~10Vdc and Resistance Dimming: DALI No adjustment for output voltage and output current With adjustment for output voltage and output current Specifications are subject to change without notice 1 V12 Specifications INPUT SPECIFICATIONS: 1~10V Dimming function for output current curve: Voltage .............................................. 90~305Vac or 127-420Vdc 100 Frequency ................. 47 to 63Hz 90 80 Inrush Current ....................... 75A max. 240Vac, Cold Start 25 70 Conducted EMI ........ CISPR/FCC Class B 60 Power Factor ........ PF> = 0.9 50 Leakage Current ........ 0.75mA max. 277Vac 40 30 Input Current .. 1.1A typ. 110Vac, Pout=99W Typical curve 20 0.55A typ. 230Vac, Pout=99W 10 0 OUTPUT SPECIFICATIONS: 0 1 2 3 4 5 6 7 8 9 10 Holdup Time ..... 16ms typ. 115Vac DIM(V)<1V,the output will be shut down Short Circuit Protection ..... Hiccup Mode (Auto Recover) Temperature Coefficient .................................... 0.05%/ Over Voltage Protection . TVS Component to Clamp Derating curve: Over Current Limit ..... Constant Current Mode (note 9) 100 Over Temperature Protection ........ 110 typ. Altitude .... 2000m 75 Startup Time (note11) .. 0.5s max. 50 Rise Time .... 50ms typ. 20LFM(Natural Convection) 25 MTBF....... MIL-HDBK-217F, GB, at 25 /115VAC160Khrs typ. Life Time 40000 Hours min. Full Load, 25 0 Vibration ... 15~2000Hz 4G period for 60min, each along X Y Z axes -40 -30 -20 -10 0 10 20 30 40 50 60 70 SAFETY AND EMC: o Ambient Temperature( C) Emission and Immunity ..... EN55015, CISPR22 EN61547, EN61000-3-2, EN61000-3-3 Surge ........... 4KV NOTE: Safety . UL8750, EN61347-1, EN61347-2-13 1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for Harmonic Current .. EN61000-3-2 Class C (>60% Load) ripple noise measuring 20MHz BW and 95% rated current. 2. Voltage accuracy is set of 90% rated current. GENERAL SPECIFICATIONS: Isolation Voltage ..... I/P-O/P 3750VAC 3. Line regulation is measured from high line to low line with 90% rated current. Isolation Resistance ....... 100M min. 4. Load regulation is measured from 90% to 10% rated current. Operating Temperature ............ -40 ~ 70 (See Derating Curve) 5. Can be adjusted by internal potentiometer. Storage Temperature .... -40~85 6. Output constant current accuracy 5%. Cooling ... Natural Convection 7. IP67f or model: LDM100SXXX-01, LDM100SXXX-03, LDM100SXXX-04 IP65 for model: LDM100sXXX-02, LDM100SXXX-03A, LDM100SXXX-04A MECHANICAL CHARACTERISTICS: 8. Efficiency is measured 95% rated power at Vin=230VAC. Dimensions ..... 9.134x1.575x1.102Inches (232.00x40.00x28.00mm) Weight .......... 504g typ. 9. Less than 50% typ. of the rated output voltage will enter hiccup mode. 10. No load power consumption<0.5W for LDM100SXXX-01, -02 No load power consumption<1.5W for LDM100SXXX-03, -03A, -04, -04A Stand by power consumption<0.5W for LDM100SXXX-03, -03A, -04, -04A 11. Start up interval must be greater than 3 seconds. Mechanical Specification All Dimensions in Inches(mm) Tolerance Inches:x.xxx0.02 Millimeters:x.xx0.5 ACL(Brown) Vo+(Red) 16AWG ACN(Blue) 2 Vo-(Black) 16AWG FG (Green/Yellow) SJTW 18AWG(0.75mm )x3C SJTW TC TC: Max Case Temperature Typical at 25C, nominal line and 75% load, unless otherwise Specified 2 Output current(%) Rated Load(%)