M-C655 Heat Sink Kit Cincon

V10 HEATSINK KIT for DC/DC CONVERTERS FEATURES: * Constructed of aluminum AL6063 for optimum heat transfer * Designed specifically for DC/DC Converters and other baseplate packages * Finished with black anodize plating * Mounting hardware and thermal pad are available HEATSINK PART NUMBER THERMAL RESISTANCE (C/W) DC/DC FIN STYLE HEIGH HEATSINK THERMAL MOUNTING NATURAL PACKAGE 100 LFM 200 LFM 300 LFM 400 LFM (mm) PAD HARDWARE CONVECTION SB SBC100 N/A 7 CLIP HC01 12.5 -- -- Cross Cut 10.0 -- -- 1x1 (K-C087) B BC100 Cross Cut 10.0 N/A 7 CLIP HC01 10.2 -- -- -- -- 2x1 (K-C088) K258W LB LBT127 Transverse 12.7 PL01 8.99 3.29 2.73 2.40 2.10 2.05x1.2 (M-C655) (NOTES 5) QBL127 5.61 4.01 3.39 Longitudinal 12.7 2.86 2.49 K308W Quarter (M-C448) PQ01 (NOTES 5) Brick QBT210 Transverse 21 4.78 2.44 2.06 1.76 1.58 (M-C421) HBL210 Longitudinal 21 3.9 1.74 1.33 1.12 0.97 (M-C308) HBT127 K310W Half Brick Transverse 12.7 PH01 4.7 2.89 2.3 1.88 1.59 (M-C091) (NOTES 5) HBT254 Transverse 25.4 3.0 1.44 1.17 1.04 0.95 (M-C092) K320W FBL254 Longitudinal 25.4 2.4 1.76 1.17 1.0 0.83 (M-B012) (NOTES 5) Full Brick PF01 K320N FBL254T 1 Longitudinal 25.4 2.4 1.76 1.17 1.0 0.83 (M-C997) (NOTES 5) NOTES: 1. With threaded mounting hole 2. Example Part Numbers: QBL127: Quarter Brick Heatsink (12.7mm High), plate fin (longitudinal) FBL254PF01: Full Brick Heatsink (25.4mm High), plate fin (longitudinal) with thermal interface pad HBT127PH01K308W: Half Brick Heatsink (12.7mm High), plate fin (transverse) with thermal interface pad and 4 pieces of M3 x 8mm screws & spring washers HBL210K308W: Half Brick Heatsink (21.0mm High), plate fin (longitudinal) with 4 pieces of M3 x 8mm screws & spring washers 3. Thermal data provided are for reference only. Actual cooling performance may vary by application. 4. Specifcations are subject to change without notice. 5. K258W: Screw set M2.5*8mm screw & lock washer x 2pcs K308W : Screw set M3*8mm screw with spring washer x 4pcs K310W: Screw set M3*10mm screw with spring washer x 4pcs K320W : Screw set M3*20mm screw & spring washer x 4pcs K320N: Screw set M3*20mm screw & lock screw nut x 4pcs 6. For volume orders, converters will be supplied with heat-sink already mounted. Separate heatsinks are only available for prototypes and small quantity orders. 7. Applying proper thermal paste is recommended. 1 V10 SB 1x1 CASE HEATSINK KIT Cross Cut Heat Sink: SBC100 (K-C087) All Dimensions in mm Rca: 12.5C/W (typ.), at natural convection Assembly: Heat Sink: SBC100 Clip: HC01 2