V12 TRE15 SERIES 15W SWITCHING ADAPTER Features * Universal Input Range 90~264Vac * Meets EN55032 Class B and CISPR/FCC Class B * Continuous Short Circuit Protection * Over Voltage Protection * No Load Power Consumption<75mW * Approved IEC62368-1, UL62368-1, EN62368-1 * Meet CoC Tier 2 & DoE Level VI (Output Cable Length 1800mm) Ordering Information TRE15XX - x -XX G XX AC Plug Type Model No. DC Plug Type UL1571 WITH OVP DC Cable Length and Type A: USA 2 Pin 01: 720mm E: Europe 2 Pin 02: 1220mm U: British 3 Pin 03: 1800mm 11: 720mm with Ferrite Core 12: 1220mm with Ferrite Core 13: 1800mm with Ferrite Core * 20AWG for 5V, UL1571 or Equivalent * 18AWG for 9V, UL1571 or Equivalent * 24AWG for 12V, 15V, 24V, UL1571 or Equivalent OUTPUT OUTPUT RIPPLE & VOLTAGE LINE LOAD AVERAGE MODEL VOLTAGE CURRENT NOISE ACCURACY REGULATION REGULATION EFFICENCY min. NOTE 1 NOTE 2 NOTE 3 NOTE 4 NOTE 5 TRE15050 5 V 2.0 A 50mVp-p 2% 1% 4% 79.0% TRE15090 9 V 1.4 A 90mVp-p 2% 1% 2% 83.5% TRE15120 12 V 1.0 A 100mVp-p 2% 1% 2% 83.3% TRE15150 15 V 1.0 A 100mVp-p 2% 1% 2% 84.5% TRE15240 24 V 0.63 A 100mVp-p 2% 1% 2% 84.5% Specifications are subject to change without notice. 1 V12 Specifications TRE15 Series Derating Curve Natural Convection INPUT SPECIFICATIONS: 100% Voltage ..................................................................... 90~264Vac Frequency ........ 47 to 63Hz 80% Input Current ...................................... 0.5A max. Inrush Current .................... Cold Start 25 50A max. 240Vac 60% Leakage Current .. 0.25mA max. T RE15050,090,120 40% T RE15150,240 OUTPUT SPECIFICATIONS: 20% Hold-up Time .... 10ms typ. 115Vac Short Circuit Protection .. Continuous(Auto Recovery) 0% Over Voltage Protection .................... IC Component to Clamp -20 -10 0 10 20 30 40 50 60 70 80 o Ambient Temperature( C) Temperature Coefficient .................................. 0.05%/ GENERAL SPECIFICATIONS: SAFETY AND EMC: Isolation ...... Input to output = 3,000VAC. Emission and Immunity ........ EN55032 Class B, FCC Part 15 Class B EN61000-6-3, EN61000-3-2, EN61000-3-3 Operating Temperature ................................. -20~ 60 (see derating curve) Storage Temperature .................. -20~85 EN55024, EN61204-3, EN61000-6-1 Humidity .................................................... 93% RH max. Non condensing Safety Class II, IEC62368-1/60950-1, UL62368-1/60950-1 EN62368-1/60950-1 Cooling . Natural Convection Switching Frequency Full Load ... 115V/85KHz typ. NOTE: .230V/65KHz typ 1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for ripple & noise measuring 20MHz BW. MTBF . MIL-HDBK-217F, GB, at 25 /115VAC ..... 330Khrs min. Altitude ....... 5000m 2. Voltage setpoint at 60% full load. Dimensions .... 2.795x1.906x1.299 inches (71.00x48.4x33.00mm)) 3. Line regulation measured from 100Vac to 240Vac full load. Weight 100g(0.22 Pounds) 4. Load regulation measured from 60% to full load and from 60% to 20% load (60% +/- 40% load). 5. Average Efficiency measured at 25%,50%,75%,100% load and input voltage is 115Vac/230Vac. Mechanical Specification Typical at 25C, nominal line and 75% load, unless otherwise Specified 2 Rated Load(%)