V10 TRE36 SERIES 36W SWITCHING ADAPTER Features * Universal Input Range 90~264VAC * Meets EN55032 Class B and CISPR/FCC Class B * Approved IEC62368-1, UL62368-1, EN62368-1 * Continuous Short Circuit Protection * Over Voltage Protection * Meet CoC Tier 2 & DoE Level VI (Output Cable Length 1800mm) (TRE36A050: Output Cable Length1220mm) * No Load Power Consumption < 75mW * Class II Ordering information TRE36AXXX -XX X XX Model No. DC Plug Type G: UL1571 WITH OVP DC Cable Length and Type E: UL1185 WITH OVP 01: 720mm 02: 1220mm 03: 1800mm 11: 720mm with Ferrite Core 12: 1220mm with Ferrite Core 13: 1800mm with Ferrite Core * 16AWG / UL1571 or Equivalent for Vo: 5V * 18AWG / UL1571 or Equivalent for Vo: 9V, 12V, 13.5V * 20AWG / UL1571 or Equivalent for Vo: 15V, 18V, 24V * 20AWG / UL1185 or Equivalent for Vo: 36V, 48V VOLTAGE LINE LOAD RIPPLE & OUTPUT OUTPUT % EFF. (Typ.) NOISE MODEL ACCURACY REGULATION REGULATION VOLTAGE CURRENT NOTE 5 NOTE 1 NOTE 2 NOTE 3 NOET 4 TRE36A050 5V 5.0A 100mVp-p 2% 1% 6% 85% TRE36A090 9V 3.3A 120mVp-p 2% 1% 4% 88% TRE36A120 12V 2.5A 120mVp-p 2% 1% 2% 89% TRE36A135 13.5V 2.4A 130mVp-p 2% 1% 2% 89% TRE36A150 15V 2.4A 150mVp-p 2% 1% 2% 89% TRE36A180 18V 2.0A 180mVp-p 2% 1% 2% 89% TRE36A240 24V 1.5A 240mVp-p 2% 1% 2% 89% TRE36A360 36V 1.0A 360mVp-p 2% 1% 2% 89% TRE36A480 48V 0.75A 480mVp-p 2% 1% 2% 89% Specifications are subject to change without notice. 1 V10 Specifications TRE36 Series Derating Curve 100% INPUT SPECIFICATIONS: Voltage ...................................................................... 90~264Vac 80% Frequency ...... 47 to 63Hz Input Current ...................................... 0.9A max. 60% Inrush Current . Cold start 25 ........ 100A max. 240Vac 40% Leakage Current ... 0.25mA max. 20% OUTPUT SPECIFICATIONS: Hold-up Time . 10ms typ. 115Vac 0% Short Circuit Protection . Hiccup Mode Continuous(Auto Recovery) -20 -10 0 10 20 30 40 50 60 o Ambient Temperature( C) Over Voltage Protection .. IC Component to Clamp(Auto Recovery) Temperature Coefficient .................................. 0.05%/ GENERAL SPECIFICATIONS: NOTE: Isolation Input to output 3,000VAC 1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for ripple & noise measuring 20MHz BW. Operating Temperature ................................ -20 ~ 60(see derating curve) 2. Voltage setpoint at 60% full load. Storage Temperature .................. -20~85 Humidity ................... 93% RH max. Non condensing 3. Line regulation is measured from 100Vac to 240Vac full load. Cooling ... Natural Convection 4. Load regulation is measured from 60% to full load and from 60% to Switching Frequency 65KHz Typical 20% load (60% +/- 40% load). 5. Efficiency measured at 75% load and input voltage is 230Vac. MTBF ... MIL-HDBK-217F, GB, 25/115VAC .. 860Khrs max. Altitude ..5000m Dimensions .. 3.937x1.771x0.886 inches (100.00x45.00x22.50mm) Weight .. 150g(0.33 Pounds) SAFETY AND EMC: Emission and Immunity ....... EN55032 Class B, FCC Part 15 Class B EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4 EN61000-3-2, EN61000-3-3, EN55024, EN61204-3 Safety ....... Class II, IEC62368-1/60950-1 UL62368-1/60950-1, EN62368-1/60950-1 Mechanical Specification All Dimensions are in inches mm Tolerance:Inches:X.XXX0.02 Millimeters:X.XX0.5 3.937 100.00 70.866 1800.00 1.969 50.00 DC Plug type: V+ ) V- DC Plug :Right Angle(5.52.1)L12mm 20AWG1800mm IEC320/C8 Typical at 25C, nominal line and 75% load, unless otherwise Specified 2 0.886 22.50 1.771 45.00 Rated Load(%)